Cable Leader - Power Extension Cord, IEC C20 to C15, 14 AWG 15A 250V for PDU, UPS, Server Rack, Network Equipment - Black
Reviews coming soon
About this product
When a rack PDU or UPS sits too far from connected equipment, this power extension cord adds reach without a wall-plug adapter. The IEC C20 male plug connects to a C19 receptacle on the source, while the high-temperature IEC C15 female connector mates with a C16 inlet and also fits a standard C14 inlet on compatible rack equipment. Three 14 AWG copper conductors support a 15 amp rating at 250V (3750W), and the 105°C/221°F SJT jacket plus fully molded strain relief helps this IEC power cord withstand warm, densely packed cable-management environments. Use the C15 power cord as a replacement cord or computer power cord extension in data centers, server rooms, network closets, lab benches, and high-density computing installations after confirming both connector shapes and the equipment rating. Best for: extending power from an IEC C19 PDU or UPS outlet to equipment with an IEC C16 or C14 inlet; Not for: standard wall outlets, C20 equipment inlets, incompatible IEC connectors, outdoor locations, or loads above 15A at 250V.
Cord Length
3'Features
C20 to C15 High-Temperature Rack Power Extension
Use this 3-prong power cord extension to reach from an IEC C19 output on a compatible PDU or UPS to equipment with a notched C16 high-temperature inlet or a standard C14 inlet. The C20 male plug goes to the power source; the C15 female connector goes to the equipment. It is useful for server racks, data centers, network closets, storage systems, and lab benches where ordinary wall-plug cords are not the right interface.
14 AWG, 15A 250V for Demanding Power Loads
Built around the IEC 60320 C20-to-C15 interface, three 14 AWG copper conductors carry up to 15 amps at 250 volts (3750 watts). The heavier construction provides more current headroom than common 16 or 18 AWG IEC cords, while the SJT jacket remains flexible for routing through rack cable managers. Always verify the outlet, equipment inlet, and connected load are compatible before use.
Check Both Ends - Not for Wall Outlets
Both ends are 3-prong IEC 60320. Quick check: C19 outlet on PDU or UPS - Yes. C16 or C14 inlet on equipment - Yes. Standard wall outlet - No. C20 equipment inlet - No. Equipment requiring a C13, C19, or C21 cord connector - No. Load above 15A at 250V - No.
105°C SJT Jacket and Fully Molded Strain Relief
The C15 connector is designed for high-temperature C16 inlets and also mates with standard C14 inlets. A 105°C/221°F SJT jacket, fully molded connector bodies, and integrated strain relief help protect the cable at the points that flex most during installation, removal, and rack reconfiguration. Indoor use only; keep away from water, damage, and sharp bends.
Sample-Tested Production - Cable Leader Direct Support
Sample-tested during production for continuity, polarity, and current rating. If your cord arrives defective or stops working in normal use, Cable Leader handles replacement requests directly. A cable specialist can also help verify whether C20-to-C15 is the correct connector combination for your PDU, UPS, or equipment inlet.
Specifications
- BrandCable LeaderModel NumberPW137-1203Product NamePower Extension Cord, IEC C20 to C15, 14 AWG 15A 250V for PDU, UPS, Server Rack, Network EquipmentColorBlackJacket MaterialSJT (PVC)Amperage15 amperes
Reviews
This product doesn't have any reviews yet.
Compare similar products
When a rack PDU or UPS sits too far from connected equipment, this power extension cord adds reach without a wall-plug adapter. The IEC C20 male plug connects to a C19 receptacle on the source, while the high-temperature IEC C15 female connector mates with a C16 inlet and also fits a standard C14 inlet on compatible rack equipment. Three 14 AWG copper conductors support a 15 amp rating at 250V (3750W), and the 105°C/221°F SJT jacket plus fully molded strain relief helps this IEC power cord withstand warm, densely packed cable-management environments. Use the C15 power cord as a replacement cord or computer power cord extension in data centers, server rooms, network closets, lab benches, and high-density computing installations after confirming both connector shapes and the equipment rating. Best for: extending power from an IEC C19 PDU or UPS outlet to equipment with an IEC C16 or C14 inlet; Not for: standard wall outlets, C20 equipment inlets, incompatible IEC connectors, outdoor locations, or loads above 15A at 250V.
Running a switch, server or multi-PSU chassis on the thin cord that came in the box? This IEC C13 to C14 heavy duty power cord carries 15A at 250V on 14 AWG three-conductor copper, two gauge steps above the 10A 18 AWG cordset most equipment ships with, so the cable is never the weak link in the rack. The C14 male end goes into any free C13 outlet on a PDU, UPS or rack strip and the C13 female end goes onto the equipment inlet, adding reach without touching the cord already run to the wall. A flexible SJT jacket rated to 105C and fully molded connectors resist cracking where the cable meets the plug. Compatible with any device using a standard IEC 60320 C14 power inlet and any C13 outlet on a PDU, UPS or surge protector; six jacket colors let you tag A-side and B-side feeds on sight. UL Listed, RoHS compliant. Best for: high-draw rack equipment and long runs where voltage drop matters. Not for: wall outlets, or C19/C20 and C5/C7 equipment.
This power cord extension adds reach to a power cable you already own, or connects equipment straight to a rack outlet. The fully molded IEC 60320 C14 male plug mates with any C13 outlet on a PDU, UPS, surge protector, or the C13 end of an existing wall cord, while the C13 female end fits any device with a standard C14 power inlet - desktop computers, servers, network switches, monitors, printers and scanners. As an IEC C13 power cord built on heavy-duty 16 AWG three-conductor copper with a flexible SJT jacket rated to 105C (221F), this 3-prong extension power cord carries 13A at 250V, a full amp step above the 10A 18 AWG cords normally supplied in the box. Fully molded strain relief at both ends resists cracking where the cable meets the connector. UL Listed. Best for: extending a C14-inlet device to a PDU or UPS in a rack, data center or workstation, and replacing a lost or worn power cord extender. Not for: wall outlets - this cord has no NEMA plug; and not for C5, C15 or C19 inlets, or equipment drawing more than 13A.
Running a switch, server or multi-PSU chassis on the thin cord that came in the box? This IEC C13 to C14 heavy duty power cord carries 15A at 250V on 14 AWG three-conductor copper, two gauge steps above the 10A 18 AWG cordset most equipment ships with, so the cable is never the weak link in the rack. The C14 male end goes into any free C13 outlet on a PDU, UPS or rack strip and the C13 female end goes onto the equipment inlet, adding reach without touching the cord already run to the wall. A flexible SJT jacket rated to 105C and fully molded connectors resist cracking where the cable meets the plug. Compatible with any device using a standard IEC 60320 C14 power inlet and any C13 outlet on a PDU, UPS or surge protector; six jacket colors let you tag A-side and B-side feeds on sight. UL Listed, RoHS compliant. Best for: high-draw rack equipment and long runs where voltage drop matters. Not for: wall outlets, or C19/C20 and C5/C7 equipment.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Explore tech essentials Sponsored
Top Deal$144.99The price was $167.99
Keep exploring
$8.43The price was $9.89
