DS18 Audio - FRP 5-Channel Class D Car Amplifier with Remote Level Control - Titanium
Reviews coming soon
About this product
The FRP-2.5K5/TI is a 5-channel car amplifier from the DS18 FRP series, built as a Class D design. It delivers 2 x 550 watts RMS at 4 ohms, 1200 watts RMS at 1 ohms, 800 watts RMS at 2 ohms and 500 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 90dB. A selectable HPF (CH1~CH4) / LPF (SUB) crossover covers HP:10Hz-2kHz (CH1~CH4) / LP:10Hz-250Hz (SUB), so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-18dB (SUB CH ONLY) centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Color
Titanium5-Channel Car Amplifier Power
Delivers 2 x 550 watts RMS at 4 ohms, 1200 watts RMS at 1 ohms, 800 watts RMS at 2 ohms and 500 watts RMS at 4 ohms. Power scales as impedance drops, so check the rating at the impedance you plan to run before matching speakers.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 92%. That means less strain on your electrical system and a smaller chassis for the same power.
Bridgeable Channels for a Subwoofer
Bridge the channels to combine their output and drive a subwoofer or a pair of higher-power speakers from the same amplifier, which lets one amp cover both your speakers and your bass instead of buying two.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable HPF (CH1~CH4) / LPF (SUB) crossover covering HP:10Hz-2kHz (CH1~CH4) / LP:10Hz-250Hz (SUB) and bass boost adjustable from 0-18dB (SUB CH ONLY) centered between 50Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with thermal, over-load, dc output and short circuit output protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 5-channel amplifiers alive in daily-driven vehicles.
- Amplifier ClassDNumber Of Channels5Bass BoostVariableBridgeableYes
Reviews
This product doesn't have any reviews yet.
Compare similar products
The FRP-2.5K5/TI is a 5-channel car amplifier from the DS18 FRP series, built as a Class D design. It delivers 2 x 550 watts RMS at 4 ohms, 1200 watts RMS at 1 ohms, 800 watts RMS at 2 ohms and 500 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 90dB. A selectable HPF (CH1~CH4) / LPF (SUB) crossover covers HP:10Hz-2kHz (CH1~CH4) / LP:10Hz-250Hz (SUB), so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-18dB (SUB CH ONLY) centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Create a custom sound experience with this KICKER CX-Series mono amplifier. The variable 12dB crossovers provide the control you need to get the exact sound you want, and the 24dB subsonic filter protects against damaging frequencies. With its small footprint and Fail-safe Integration Technology-PLUS, this KICKER CX-Series mono amplifier is easy to install and works with almost any radio.
The Pioneer GM-DX874 four-channel amplifier will deliver up to 150 watts RMS to each of your front and rear speakers for powerful music. Highly efficient Class D technology keeps this powerful amp running as cool as it looks, and allows for a compact chassis that fits in a lot of out of the way spaces. The frequency response of this amplifier stretches up to 50,000 Hz, for Hi-Res Audio Certified playback. Pioneer uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. Speaker-level inputs allow you to install this amp in a factory system with no RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. Built-in high- and low-pass filters let you adjust the sound for your vehicle's interior, whether you're driving speakers or subs.
Boost the bass in your car with this KICKER 1200W mono amplifier. Stability at 1 ohm allows for use of multiple sound system wiring options, while a subsonic filter at 24dB protects speakers from dangerous frequencies. This KICKER 1200W mono amplifier features 12dB crossovers to control sound precisely and comes with vertical mounting hardware for unique configurations.
| Pros for DS18 Audio - FRP 5-Channel Class D Car Amplifier with Remote Level Control - Titanium | |||
|---|---|---|---|
| There were no pros for this product— | Power, Sound Quality, Size, Price, Ease of use | Sound Quality, Power, Size, Installation Ease, Connectivity | Power, Sound Quality, Size, Price, Bass |
| Cons for DS18 Audio - FRP 5-Channel Class D Car Amplifier with Remote Level Control - Titanium | |||
| There were no cons for this product— | Heat | Heat Dissipation | Heat |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
More to consider
Enjoy your ride Sponsored
$269.99The price was $349.99
60th Anniversary Deal$299.99The price was $399.99
Keep exploring
$49.99The price was $51.99
$799.95The price was $1,299.95
