DS18 Audio - FRP Monoblock Class D Car Amplifier with Remote Level Control, 1500W RMS at 1 Ohm - Titanium

Demand maximum power from your car’s audio system with the Altitude Series 800W Monoblock Class D Amplifier from AudioControl. The A800.1 combines premium engineered audio components and advanced technology to deliver over-the-top power with a sleek and modern aesthetic. Equipped with ParaBASS low frequency contouring and new features including Spike Mode and Valet Mode, this amplifier guarantees outstanding performance for any vehicle.

The FRP-2.5K/TI is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 2500 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 83dB. A selectable Fixed Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

The NXL-X1000.1D is a monoblock car amplifier from the DS18 NXL-X series, built as a Class D design. It delivers 1000 watts RMS at 1 ohms. Total harmonic distortion is rated at less than 0.05% with a signal-to-noise ratio of greater than 82dB. A selectable LPF Fixed° crossover covers 50Hz-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-18dB centered between 42Hz. A IP67 waterproof rating makes it suitable for boats, side-by-sides and powersports vehicles where the amplifier is exposed to water and spray. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.