DS18 Audio - ION 1-Channel Class D Car Amplifier, 600W RMS at 1 Ohm - Black/Silver
Reviews coming soon
About this product
The ION600.1D is a 1-channel car amplifier from the DS18 ION series, built as a Class D design. It delivers 600 watts RMS at 1 ohms, 400 watts RMS at 2 ohms and 200 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 95dB. A selectable Band-Pass crossover covers HP: 15Hz-1KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0~12dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Features
600W RMS Monoblock Car Amplifier
Delivers 600 watts RMS at 1 ohms, 400 watts RMS at 2 ohms and 200 watts RMS at 4 ohms. Wire down to the lowest impedance your subwoofer allows to get the full rating, and set the gain to your speaker RMS to keep the signal clean.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 88%. That means less strain on your electrical system and a smaller chassis for the same power.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable Band-Pass crossover covering HP: 15Hz-1KHz / LP: 40Hz-20KHz and bass boost adjustable from 0~12dB centered between 45Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with thermal, over-load, dc output and short circuit output protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 1-channel amplifiers alive in daily-driven vehicles.
0.01% THD and greater than 95dB Signal-to-Noise
Total harmonic distortion of 0.01% and a signal-to-noise ratio of greater than 95dB mean the amplifier reproduces the signal it is given instead of adding hiss and distortion of its own, which matters most at high volume.
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariableBridgeableNo
Reviews
This product doesn't have any reviews yet.
Compare similar products
The ION600.1D is a 1-channel car amplifier from the DS18 ION series, built as a Class D design. It delivers 600 watts RMS at 1 ohms, 400 watts RMS at 2 ohms and 200 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 95dB. A selectable Band-Pass crossover covers HP: 15Hz-1KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0~12dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
The Crunch PX-1000.4 1000W Car Stereo Amp & Soundstorm AKS8 8 Gauge Amp Wiring Kit has everything you need to achieve a premium sound in your car.This 4-channel amplifier has high-quality circuit and hardware designs with exclusive technologies to improve sound quality and minimize distortion. Crunch POWERX incorporates full Class A/B technology in stereo and 4-channel amplifiers with Class D in mono. The POWERX line also includes QTD (Quick Thermal Dispersion) Technology, which puts more aluminum on the heatsink than a normal amplifier. QTD assures this amplifier provides huge power while running very cool with nearly undetectable musical distortions.This 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 17-foot 8-gauge red power cable, competition high-quality fuse holder, 3 feet of 8-gauge black ground cable, 16 feet of 18-gauge blue turn-on wire, a 20-foot high-performance RCA interconnect, 20 feet of speaker wire, 20, 4-inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16-inch ring terminal, and a 1/4-inch ring terminal.Get more performance from your car audio with the Crunch PX-1000.4 1000W Car Stereo Amp & Soundstorm AKS8 8 Gauge Amp Wiring Kit.
Turn up the volume with this KICKER CX-Series mono amplifier. A variable 12dB crossover makes it easy to optimize audio levels, while the 24dB subsonic filter protects listeners from damaging frequencies. The compact design of this KICKER CX-Series mono amplifier offers flexible placement, and the FIT+ technology provides compatibility with most radios.
Create a custom sound experience with this KICKER CX-Series mono amplifier. The variable 12dB crossovers provide the control you need to get the exact sound you want, and the 24dB subsonic filter protects against damaging frequencies. With its small footprint and Fail-safe Integration Technology-PLUS, this KICKER CX-Series mono amplifier is easy to install and works with almost any radio.
| Pros for DS18 Audio - ION 1-Channel Class D Car Amplifier, 600W RMS at 1 Ohm - Black/Silver | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Power, Sound Quality, Ease of use, Size, Bass | Power, Sound Quality, Size, Ease of use, Price |
| Cons for DS18 Audio - ION 1-Channel Class D Car Amplifier, 600W RMS at 1 Ohm - Black/Silver | |||
| There were no cons for this product— | There were no cons for this product— | Overheating | Heat |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
More to consider
Enjoy your ride Sponsored
$477.99The price was $499.99
Keep exploring
$62.99The price was $64.99
