DS18 Audio - Jeep JL/JLU/JT 6.5" Loaded Dash Enclosures (Pair), 150W RMS 4-Ohm

The DXQ6C2 is a pair of 6.5" component speaker system built for high-output car audio, powersports and pro audio systems. They handle 150 watts RMS and 300 watts max power at 4 ohms. A 90dB sensitivity rating converts amplifier power into clear, audible output efficiently, so you get more volume from the power you already have. The frequency response spans 35Hz to 20kHz. A component layout separates the woofer and the tweeter, with a crossover splitting the signal between them, so you can place each driver where it images best. Construction includes a yellow straw + composite foam cone and a ferrite magnet motor. Sold as a pair so you can complete both sides in one purchase.

Whether you’re driving with the top on or off, the SPV-10TW-WRA captures the high frequencies so you can experience music detail even over the wind and traffic noise. Plus, the weather-resistant tweeters ensure an uninterrupted music experience no matter the driving conditions. The SPV-10TW-WRA utilizes the factory speaker locations on the 2007 – Up Jeep® Wrangler and Jeep® Gladiator and includes vehicle-specific harnesses and connectors for a true plug-and-play installation experience. Weather-Resistant 1” Component Tweeters Teteron Dome Tweeter Plug-and-Play Installation: Utilizes Factory Locations and Vehicle-specific Harnesses/Connectors Crossover with two tweeter level output options: 0dB (flat) for “Tombstone” on-axis applications and +3dB for in-dash off-axis applications Compatible with 2007 – Up Jeep® Wrangler and Jeep® Gladiator What's in the Box: (2) 1” Component Tweeters (2) OEM-fit Mounting Adapters (2) In-line Crossover Networks w/ OEM connectors for Plug ‘n Play Installation (2) Alpine logo badges for Tweeter Grilles Owner’s Manual Specifications: Power Handling: 75W RMS / 225W Peak Frequency Response: 2kHz - 22kHz Nominal Impedance: 4Ω Diaphragm: 1”

Diamond Audio’s is proud to release it’s new and improved HXMF Black Series Coaxial Drivers. Building on the features of the HXM and HXMF platforms, the new HXMFB series increases performance where it counts. Higher output, more impactful bass response, and more high-end with new larger 1.5” Titanium tweeters. At Diamond Audio, we’re driven by a relentless passion for perfect sound. That’s why we’ve reimagined the legendary HXM and HXMF series to expand it with the new HXMFB Series, combining the best features of the HXM and HXMF drivers and improving both the output performance and low-end response. Available in both 2Ω and 4Ω models to really optimize system design. The result? Class-leading sound quality, exceptional output, and that trademark Diamond Audio quality. These drivers’ elements are crafted to the highest standards, from the premium voice coils and advanced Neodymium motor structures to the rock-solid fiber-reinforced composite basket design, oversized titanium tweeters, and carbon fiber cones. Choose Diamond Audio’s HXMFB Series Coaxial Drivers — because your music deserves the best. Specifications SPEAKER SIZE - 6.5" SPEAKER TYPE - HORN LOADED CO AXIAL OHMS (PER COIL) - 2 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - CARBON FIBER DIAPHRAGM MATERIAL - TITANIUM BASKET MATERIAL - FIBREGLASS REINFORCED POLYMER MAGNET TYPE - NEODYMIUM SURROUND MATERIAL - RUBBER VOICE COIL DIAMETER - INCH (MM) - 2" THIELE/SMALL PARAMETERS SENSITIVITY (1W/1M): 95 RE (Ω) [SERIES]: 1.8 QMS: 7.506 QES: 0.369 QTS: 0.352 FS (HZ): 105 VAS (L): 6.172 CMS (MM/N): 0.288 MMS (G): 8.024 SD (M2): 122.718 BL (T*M): 5.068 XMAX (MM): 2.75 POWER HANDLING RMS: 125 POWER HANDLING MAX: 250 MOUNTING DEPTH: IN.(MM):2.52" (64MM) CUT OUT DIAMETER IN.(MM):5.44" (138.06MM) OVER ALL DIAMETER IN.(MM):6.61" (167.79MM) OVER ALL HEIGHT IN.(MM):3.03" (77.02MM)