DS18 Audio - JVOCE Dual 8" 2-way Roll Cage Sound Bar with RGB LED Lights, 500W RMS 4-Ohm
Reviews coming soon
About this product
The JVOCE8 is a 8" loudspeaker built for high-output car audio, powersports and pro audio systems. It handles 500 watts RMS and 2 watts max power at 4 ohms. A 99dB sensitivity rating converts amplifier power into clear, audible output efficiently, so you get more volume from the power you already have. The frequency response spans 60Hz to 20KHz. Construction includes a waterproof paper cone and a ferrite magnet motor. Sold individually, so order the quantity your build requires.
Features
500W RMS / 2W Peak Car Audio Power
Handles 500 watts RMS and 2 watts peak power at 4 ohms. Built for high-output car audio and car stereo systems that need real volume from a 8" without distortion or power compression.
99dB High Sensitivity
A high 99dB sensitivity rating turns amplifier watts into audible output efficiently, so this loudspeaker plays loud and clear even from a modest car amplifier.
60Hz to 20KHz Frequency Response
A 60Hz to 20KHz frequency response covers the range with definition and presence, keeping vocals and instruments articulate at high volume inside a loud car audio system.
Integrated LED Lighting
Built-in LED lighting adds a custom look to the install. A lighting controller is required for full color control and is sold separately.
Durable Car Audio Construction
Built with a waterproof paper cone and a ferrite magnet motor for durability under sustained high-output use.
Specifications
- RMS Power500 wattsPeak Power Handling1000 wattsSensitivity99 decibelsSpeaker Size8"Speaker Type2-way
Reviews
This product doesn't have any reviews yet.
Compare similar products

The JVOCE8 is a 8" loudspeaker built for high-output car audio, powersports and pro audio systems. It handles 500 watts RMS and 2 watts max power at 4 ohms. A 99dB sensitivity rating converts amplifier power into clear, audible output efficiently, so you get more volume from the power you already have. The frequency response spans 60Hz to 20KHz. Construction includes a waterproof paper cone and a ferrite magnet motor. Sold individually, so order the quantity your build requires.

The NXL-X8PRO/BK is a pair of 8" mid-range loudspeakers built for high-output car audio, powersports and pro audio systems. They handle 250 watts RMS and 500 watts max power at 4 ohms. A 97dB sensitivity rating converts amplifier power into clear, audible output efficiently, so you get more volume from the power you already have. The frequency response spans 80Hz to 20kHz. Construction includes a water resistant paper cone and a ferrite magnet motor. A water-resistant design lets them hold up in open-air installs where moisture, spray and humidity are part of the environment. Marine-grade construction resists saltwater, UV exposure and temperature swings for boats, side-by-sides and motorcycles. Integrated RGB LED lighting sits behind the grille so you can match your lighting to your build. Please note that a lighting controller is required for full control and is sold separately, not included with this product. Protective grilles are included. Sold as a pair so you can complete both sides in one purchase.

The NVY-JKSBARLD is a loaded overhead soundbar for Jeep Wrangler JK and JKU, 2007 through 2018, from the DS18 NVY series. It arrives with 4 x 8" NVY-M8/BK speakers, 4 x 4.5" PRO-TW4LD tweeters, 2 x 1" PRO-DRNSC1.5 compression drivers already installed and prewired. Each 8" NVY-M8/BK speaker handles 200 watts RMS and 400 watts peak at 4 ohms, rated 99dB across a 40Hz-20KHz response, built on a kevlar cone and a neodymium motor. The speakers carry an IP65 rating against water and dust, so the system holds up with the top and doors removed. It fits 2007-2018 models and mounts in the factory location using the original bolts, with no drilling, no trimming and no modification to the OEM dome light. A plug and play OFC wire harness with factory-style connectors and terminals is included. The surface is wrapped in leather material over a lightweight, UV-protected structure, and finished with a digital LED logo badge. The DS18 LC-DRM lighting controller is required for full control of the LED badge and is sold separately. It is not included.

The JVOCE is a 6.5" loudspeaker built for high-output car audio, powersports and pro audio systems. It handles 450 watts RMS and 2 watts max power at 4 ohms. A 98dB sensitivity rating converts amplifier power into clear, audible output efficiently, so you get more volume from the power you already have. The frequency response spans 80Hz to 20Khz. Construction includes a waterproof paper cone and a ferrite magnet motor. Sold individually, so order the quantity your build requires.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.











































