DS18 Audio - NXL 10" Neodymium Loudspeaker with RGB LED Lights, Bullet and Grille (Pair), 300W RMS 4-Ohm
Reviews coming soon
About this product
The CF-X10TPNEO is a pair of 10" loudspeakers built for high-output car audio, powersports and pro audio systems. They handle 300 watts RMS and 900 watts max power at 4 ohms. A 100dB sensitivity rating converts amplifier power into clear, audible output efficiently, so you get more volume from the power you already have. The frequency response spans 45Hz to 22kHz. A bullet phase plug at the center of the cone widens frequency dispersion and adds structural strength to the cone assembly. Construction includes a waterproof compress paper cone and a neodymium magnet motor. A water-resistant design lets them hold up in open-air installs where moisture, spray and humidity are part of the environment. Marine-grade construction resists saltwater, UV exposure and temperature swings for boats, side-by-sides and motorcycles. Integrated RGB LED lighting sits behind the grille so you can match your lighting to your build. Please note that a lighting controller is required for full control and is sold separately, not included with this product. Protective grilles are included. Sold as a pair so you can complete both sides in one purchase.
300W RMS / 900W Peak Car Audio Power
Handle 300 watts RMS and 900 watts peak power at 4 ohms. Built for high-output car audio and car stereo systems that need real volume from a 10" speaker without distortion or power compression.
100dB High Sensitivity
A high 100dB sensitivity rating turns amplifier watts into audible output efficiently, so these car speakers play loud and clear even from a modest car amplifier. High-sensitivity car speakers are the easiest way to gain volume without buying more power.
45Hz to 22kHz Frequency Response
A 45Hz to 22kHz frequency response covers the range with definition and presence, keeping vocals and instruments articulate at high volume inside a loud car audio system.
Aluminum Bullet Phase Plug
A bullet phase plug at the center of the cone widens frequency dispersion and adds structural strength to the cone assembly, broadening the listening window so the midrange stays consistent across the cabin. A signature look in pro audio car speaker builds.
Integrated RGB LED Lighting
Built-in RGB LED lighting sits behind the grille, letting you match your 10" car speakers to the rest of your build. Please note: a lighting controller is required for full color control and is sold separately. It is NOT included.
- RMS Power300 wattsPeak Power Handling900 wattsSensitivity100 decibelsSpeaker Size10"Speaker Type1-way
Reviews
This product doesn't have any reviews yet.
Compare similar products
The CF-X10TPNEO is a pair of 10" loudspeakers built for high-output car audio, powersports and pro audio systems. They handle 300 watts RMS and 900 watts max power at 4 ohms. A 100dB sensitivity rating converts amplifier power into clear, audible output efficiently, so you get more volume from the power you already have. The frequency response spans 45Hz to 22kHz. A bullet phase plug at the center of the cone widens frequency dispersion and adds structural strength to the cone assembly. Construction includes a waterproof compress paper cone and a neodymium magnet motor. A water-resistant design lets them hold up in open-air installs where moisture, spray and humidity are part of the environment. Marine-grade construction resists saltwater, UV exposure and temperature swings for boats, side-by-sides and motorcycles. Integrated RGB LED lighting sits behind the grille so you can match your lighting to your build. Please note that a lighting controller is required for full control and is sold separately, not included with this product. Protective grilles are included. Sold as a pair so you can complete both sides in one purchase.
Upgrade your car audio situation with these Kenwood Road Series speakers. The heavy duty magnet design keeps them pumping volume over time, and they're easy to install thanks to lower tweeter heights and a shallow depth. These 6.5-inch Kenwood Road Series speakers have 300W peak power for booming performance in your vehicle. Geek Squad Installation Recommended Visit your local Best Buy store for more information.
The TS-WX1010A is a powerful, sealed, pre-loaded subwoofer enclosure. It features a built-in, high-output, low-distortion 1100 W Max Class D amplifier paired with a 10" subwoofer that has a urethane surround and an oversized magnet structure, specifically optimized for use in sealed enclosures. User-adjustable controls include an LPF, phase control, variable bass boost level, and bass boost to provide enhanced subwoofer control. To expand system flexibility and user control, the output volume can be adjusted using the included wired remote bass control knob.
Newly redesigned and Hi-Res Audio Certified to reproduce up to 40kHz frequency response, the Next-Generation S-Series S2-S65C 6.5” 2-way Component Speakers offer a new standard in entry-level sound performance. This new benchmark in sound quality elevates the Next-Gen S-Series speakers, resulting in a more accurate and natural sound at an entry-level price point.
| Pros for DS18 Audio - NXL 10" Neodymium Loudspeaker with RGB LED Lights, Bullet and Grille (Pair), 300W RMS 4-Ohm | |||
|---|---|---|---|
| There were no pros for this product— | Sound Quality, Ease of Installation, Price, Fit, Highs | Sound Quality, Price, Bass, Size, Installation Ease | Sound Quality, Ease of Installation, Value |
| Cons for DS18 Audio - NXL 10" Neodymium Loudspeaker with RGB LED Lights, Bullet and Grille (Pair), 300W RMS 4-Ohm | |||
| There were no cons for this product— | Bass, Power, Compatibility | There were no cons for this product— | Mid Bass |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
More to consider
Enjoy your ride Sponsored
Keep exploring
$899.95The price was $1,199.95
$69.92The price was $89.99
