DS18 Audio - ZR 4-Channel Class D Car Amplifier, 4 x 200W RMS at 4 Ohm - Black
Reviews coming soon
About this product
The ZR800.4D is a 4-channel car amplifier from the DS18 ZR series, built as a Class D design. It delivers 2 x 600 watts RMS at 4 ohms, 4 x 320 watts RMS at 2 ohms and 4 x 200 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 1.00% with a signal-to-noise ratio of greater than 90dB. A selectable FULL/LPF/HPF crossover covers 40Hz-4KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from No centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
4 x 200W RMS 4-Channel Amplifier
Delivers 2 x 600 watts RMS at 4 ohms, 4 x 320 watts RMS at 2 ohms and 4 x 200 watts RMS at 4 ohms. Power scales as impedance drops, so check the rating at the impedance you plan to run before matching speakers.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 88%. That means less strain on your electrical system and a smaller chassis for the same power.
Bridgeable Channels for a Subwoofer
Bridge the channels to combine their output and drive a subwoofer or a pair of higher-power speakers from the same amplifier, which lets one amp cover both your speakers and your bass instead of buying two.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable FULL/LPF/HPF crossover covering 40Hz-4KHz and bass boost adjustable from No centered between N/A. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with thermal, over-load, dc output and short circuit output protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 4-channel amplifiers alive in daily-driven vehicles.
- Amplifier ClassDNumber Of Channels4Bass BoostNoneBridgeableYes
Reviews
This product doesn't have any reviews yet.
Compare similar products

The ZR800.4D is a 4-channel car amplifier from the DS18 ZR series, built as a Class D design. It delivers 2 x 600 watts RMS at 4 ohms, 4 x 320 watts RMS at 2 ohms and 4 x 200 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 1.00% with a signal-to-noise ratio of greater than 90dB. A selectable FULL/LPF/HPF crossover covers 40Hz-4KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from No centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

The G3600.4D is a 4-channel car amplifier from the DS18 G series, built as a Class D design. It delivers 2 x 740 watts RMS at 4 ohms, 4 x 420 watts RMS at 2 ohms and 4 x 300 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 90dB. A selectable LPF / FLAT / HPF crossover covers 50Hz-4KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from N/A centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

Create a custom sound experience with this KICKER CX-Series mono amplifier. The variable 12dB crossovers provide the control you need to get the exact sound you want, and the 24dB subsonic filter protects against damaging frequencies. With its small footprint and Fail-safe Integration Technology-PLUS, this KICKER CX-Series mono amplifier is easy to install and works with almost any radio.

Boost the bass in your car with this KICKER 1200W mono amplifier. Stability at 1 ohm allows for use of multiple sound system wiring options, while a subsonic filter at 24dB protects speakers from dangerous frequencies. This KICKER 1200W mono amplifier features 12dB crossovers to control sound precisely and comes with vertical mounting hardware for unique configurations.
| Pros for DS18 Audio - ZR 4-Channel Class D Car Amplifier, 4 x 200W RMS at 4 Ohm - Black | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Power, Sound Quality, Size, Ease of use, Price | Power, Sound Quality, Size, Ease of use, Bass |
| Cons for DS18 Audio - ZR 4-Channel Class D Car Amplifier, 4 x 200W RMS at 4 Ohm - Black | |||
| There were no cons for this product— | There were no cons for this product— | Heat | Heat |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.



































