Electro-Harmonix Nano Metal Muff Distortion with Noise Gate. Built for the player who demands nothing less than hard-hitting distortion and an intense, aggressive sound! The EHX Nano Metal Muff was built for the player who demands nothing less than hard-hitting distortion and an intense, aggressive sound. It’s a combination of weaponized distortion and an extremely powerful EQ section that provides all the flexibility and tone-shaping needed to dial in an array of ultra-heavy sounds. The Nano Metal Muff’s newly designed noise gate is a superb addition to this high-gain pedal and eliminates unwanted hum when you stop playing. It features a noise floor threshold control (GATE) and its own LED to indicate when the gate is engaged. A compact footprint and intelligent, straightforward controls complete the picture. Product Highlights: Voiced for the heavy metal player. Compact, pedalboard friendly footprint. Extensive EQ control: Bass +/- 14dB of cut or boost, Mid +/- 15dB and Treble +/- 10dB. VOL (volume) sets the pedal’s output volume level. DIST adjusts input gain and distortion. Noise gate eliminates unwanted noise and includes an LED to indicate when the output signal is muted. 9V battery included. Product Features: Volume Knob: Sets the overall output level. Gate Knob: Removes unwanted hum by adjusting the noise floor threshold. The gate mutes the OUTPUT jack when the signal at the INPUT jack is below the threshold setting of the GATE knob. As GATE is turned clockwise, a louder guitar signal at the input jack is required to unmute the OUTPUT jack. Set GATE fully counter-clockwise to disable. Distortion Knob: Adjusts the amount of distortion and saturation. Turn clockwise for more saturation. Treble Knob: Provides up to 10dB of cut and boost in the treble frequency range. Mid Knob: Provides up to 15dB of cut and boost in the middle frequency range. Bass Knob: Provides up to 14dB of cut and boost in the bass frequency range. Output Jack: The 1/4" jack is the audio output from the Nano Metal Muff. In Bypass mode, the OUTPUT jack is connected to the INPUT jack through a buffer circuit. The output impedance at the OUTPUT jack is 600Ω. Input Jack: This 1/4" jack is the audio input to the Nano Metal Muff. The input impedance presented at the INPUT jack is 1MΩ. Bypass Footswitch and Status LED: Toggles the Nano Metal Muff between effect and buffered bypassed. The STATUS LED lights when the pedal is engaged. Product Specifications: Circuit: Analog. Bypass: Buffered Bypass. Audio: Mono. Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included). Dimensions (in): 4.5 x 2.75 x 2.1. Current Draw: 24mA. Year Released: 2021. UPC: 683274012322.

Electro-Harmonix Micro Q-Tron Envelope Filter Pedal. Smooth envelope filter with a funky wah-wah tone! The EHX Micro Q-Tron is a smooth envelope filter with a funky wah-wah tone. The filter is controlled by its internal envelope follower, analyzing the volume of your notes and the dynamics of your playing to directly sweep the filter’s center or cutoff frequency. A stronger attack or louder note will produce a wider frequency sweep while softer playing produces more subtle effects. Use the Q control to make the effect more dramatic. Product Highlights: True bypass. Drive control sets sensitivity and filter sweep range. Selectable low pass, band pass or high pass filters. Q control sets the filter’s bandwidth from smooth to funky. Tough and compact die-cast chassis. 9V battery included. Product Features: (LP BP HP): Determines what frequency range the filter will pass. Q Control: Determines the peak bandwidth of the filter. Drive Control: This is the filter sweep sensitivity control. Output Jack: Connect your amplifier to the AMP jack. Input Jack: Connect your instrument to the INPUT jack. Footswitch: Toggles between effect and bypass modes. Product Specifications: Circuit: Analog. Bypass: True Bypass. Audio: Mono. Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included). Dimensions (in): 4.75 x 4 x 2.25. Current Draw: 15mA. Year Released: 2006. UPC: 68327405002.

The EHX Tone Corset is a versatile analog compressor featuring a blend control to dial in the perfect amount of parallel compression. In addition to standard Volume and Sustain controls, an Attack control adjusts the response of the compression circuit for increased flexibility. From cowboy plunk to warm and transparent console tones, the Tone Corset fits around any player's style. Mike Matthews says, The Tone Corset is the funkiest analog compressor I ever heard on guitar! Features: ·Four-knob design provides excellent control and gives the user the ability to precisely shape their instrument's dynamics · The Sustain knob controls the amount of compression applied to the guitar signal. As Sustain is turned clockwise, compression and sustain increases · The Attack knob adjusts how quickly the compressor recovers. As Attack is turned clockwise, the pedal's response is slower and more initial pick attack comes through · The Blend knob adjusts the mix of the dry and compressed signals. As Blend is turend clockwise, the signals blend from 100% dry to 100% compressed · The Pad switch pads down the input signal to prevent undesirable distortion if the Tone Corset is used with high output humbuckers, bass guitar, etc. · True bypass for maximum signal path integrity · 9V battery included