Electro-Harmonix LPB-3 Linear Power Booster & EQ. Sculpt your tone to any shape with the LPB-3! The effect that launched Electro-Harmonix gets a makeover with the Electro-Harmonix LPB-3 Linear Power Booster & EQ. With an active EQ featuring a powerful Parametric Mids control and up to a walloping 33dB of boost, the LPB-3 is the perfect tool for any tone tailoring task. Boost your sound into saturated bliss with transformative precision like never before. Housed in EHX’s Nano-sized chassis, the LPB-3 is capable of boosting up to +33dB of clean gain with the powerful tone shaping of a 3-band EQ with parametric Mids. The active 3-Band EQ features TREBLE and BASS knobs to control the highs and lows plus a powerful parametric Mids control with adjustable MID FREQ and Q. BOOST sets the overall output of the pedal with the MAX switch toggling between 20dB and 33dB of maximum boost. Use the PRE-GAIN knob to fine-tune the total gain and volume of the boost. This booster pedal’s additional features include selectable Buffered/True Bypass switching and internally extended 30V power rails for enhanced headroom. Product Highlights: Active EQ for precision tone sculpting. Parametric MIDS section cuts through any mix. Up to 33dB of boosting power. High voltage rails, extended headroom. Selectable Buffered/True Bypass. Inspired by the effect that launched Electro-Harmonix in 1968, the LPB-1! Product Features: Power Jack: Insert the output plug of the supplied AC Adapter into the power jack. The LPB-3 requires 120mA at 9VDC on center-negative plug. Do not exceed 12VDC at the power jack. The LPB-3 does not take batteries. Max Switch: Boosts the gain at the output stage, and sets the maximum gain of the LPB-3 - from Input to Output - to either 33dB or 20dB. Set MAX to 20dB for greater dynamics; set MAX to 33dB to drive the signal harder and potentially send your amp into saturation along with higher BOOST knob settings. MID LVL Knob: Boosts or cuts the MID EQ. Turn the MID LBL knob clockwise from its noon position to boost the MID EQ frequency. Turn MID LBL counterclockwise to cut MID EQ. Set MID LVL to its center position for a flat MID EQ response. Treble Knob: Boosts or cuts frequencies above 3.25kHz. Turn the TREBLE knob clockwise from noon to boost the high end. Turn the knob counterclockwise to cut highs. Set TREBLE to its center position for a flat treble response. Pre-Gain Knob: Adjusts input gain from 0dB (unity) to 20dB before the signal hits the EQ circuitry. Use PRE-GAIN in conjunction with BOOST and MAX to fine-tune the total volume and gain through the LPB-3. Pro tip: If the EQ knobs are set in the boost half of their range, signal clipping can be avoided by decreasing PRE-GAIN. If the EQ settings are set to cut, turn up PRE-GAIN for more volume. MID FREQ Knob: Adjusts the MID EQ center frequency, which is boosted or cut by the MID LVL knob. The frequency range of this knob is 240Hz to 3.3kHz. Pro tip: For a brighter sound, try cutting the low MIDs by setting MID FREQ to 10 o'clock and MID LVL to 11 o'clock. Bass Knob: Boosts or cuts frequencies below 240Hz. Turn BASS clockwise from the noon position to boost the low end. Turn the knob counterclockwise to cut. Leave BASS in its center position for a flat bass response. Output Jack: Audio output jack. Output impedance 660Ω; Max Out: +22dBu. Input Jack: Audio input jack. Input impedance 1MΩ; Max In: +20dBu. Footswitch and Status LED: The footswitch engages or bypasses the effect. The status LED lights when the effect is engaged and is off while in bypass. Product Specifications: Circuit: Analog. Bypass: Selectable Buffered / True Bypass. Audio: Mono. Power Supply: 9.6VDC-200mA power adapter included. Dimensions (in): 4.5 x 2.75 x 2.1. Current Draw: 120mA. Year Released: 2024.

Electro-Harmonix Canyon Delay & Looper. Jaw-dropping, cavernous delays in a compact package! Packed with more power than pedals taking up more real estate, the compact EHX Canyon Delay & Looper features a collection of awe-inspiring effects, from pristine digital delay to warm and warbly tape echo, reverse and modulated delays, cascading octave delay and shimmer, and even an exquisite Deluxe Memory Man emulation. There are ten different effects in all plus a fully featured looper. Internal or external Tap Tempo with tap divide and a chasm full of intuitive secondary knob controls deliver a truly grand experience. Features 11 modes: 1. ECHO: digital delay, 2. MOD: modulated delay, 3. MULTI: multi-tap delay, 4. REVRS: reverse delay, 5. DMM: Deluxe Memory Man, 6. TAPE: tape delay, 7. VERB: reverb plus delay, 8. OCT: octave delay, 9. SHIM: shimmer, 10. S/H: sample and hold, 11. LOOP: looper mode with max loop length of 62 seconds. Product Highlights: Delay time of 5 milliseconds to 3 seconds, Tap Tempo with tap divide using the built-in footswitch or an external footswitch, Tails switch allows you to choose whether echoes repeat or stop immediately when bypassed, Easy access to hidden parameters through Secondary Knob Mode, Power adapter included. Product Features: FX LVL Knob controls the output volume of the delay effect, Delay Knob adjusts delay time from 5ms to 3s, Mode Knob selects one of 11 delay modes, Feedback Knob controls the number of repeats, Tap/Divide Switch adjusts Tap Divide setting for tempo, Output Jack is the audio output, Input Jack is the audio input, Tap In Jack for external footswitch tempo control, Footswitch toggles bypass/effect and sets delay time by tapping twice or more. Product Specifications: Circuit: Digital, Bypass: Buffered Bypass, Audio: Mono, Power Supply: 9.6VDC-200mA power adapter included, Dimensions (in): 4.5 x 2.75 x 2.1, Current Draw: 150mA, Year Released: 2017, UPC: 683274011882.

The late 1970s rarity Electro-Harmonix Slap-Back Echo pedal is reissued with modern updates and a Pick footprint! The 50s era gave birth to an iconic sound in which a single, short delay was utilized to add depth and rhythmic effect on countless recordings. The newly reissued all-analog design of the EHX Slap-Back Echo delivers this beloved classic sound and more in a Pico-sized pedalboard-friendly package. With three delay time settings and up to +20dB of boost, the Slap-Back Echo can achieve subtle doubling effects to intense bathroom reflections all with the distinct flavor of bucket-brigade (BBD) circuitry. Housed in EHX's Pico-sized chassis, the Slap-Back Echo features Gain and Blend knobs as well as a Time switch. The Gain knob controls the input signal before the echo circuit and also adjusts the overall volume at the output with a boost of up to +20dB. The Blend knob mixes the dry signal and the echo signal from 100% dry to 100% echo. The Time switch selects between three different elay times: 45ms, 65ms, and 100ms. Features: · Independent gain and blend knobs · Time switch with 45ms, 65ms, and 100ms delay times · Up to 20dB of boost · True-Bypass · Small, pico-sized chassis · 9V power supply included