Customer Ratings & Reviews

Quiet Easy install - just be sure you have an outlet for it to plug into under the sink. Only thing that I were ours change is the rubber sink stopper has very small holes so water flows too slow and you have to hold it open to get the food to pass through it. Purchased a “Super Stuffer” and problem solved.

We did our research and this brand and unit were highly recommended. It's a quiet unit that can chop lemon halves and other items very quickly.

It grinds up food waste with power to spare. If you're upgrading from a half horse power disposal you can tell this one has more power and it has a muffler ring, so it’s quieter too. If you have the typical three bolt-screw twist on mount and a DIYer, changing out an older disposal for this one is pretty easy. At first glance, I assumed it’s made for Frigidaire by Insinkerator. Especially since the mount is the same. Looks like it’s the industry standard now. I used to service and install appliances primarily from the late 80 until the mid 90s before switching to HVAC full time and I dealt with disposals a lot. Most of the disposals I dealt with were Insinkerators. In the time since I have seen several brands that were rebadged Insinkerators. Kenmore and Whirlpool name a couple. That’s not a bad thing since they set the benchmark. However, even with all the similarities there are a few subtle differences. So, I cannot say for sure if Insinkerator (Emerson Electric) makes it. But my guess is they do. Especially considering the 10 year warranty. Installation is pretty straightforward and the instruction book does a good job of explaining how to remove various types of disposal installations. It’s not a difficult job, especially if you have installed or changed out a twist mount disposal before. They supply a 90 degree elbow that you may or may not need. I didn’t. The instructions also show how to remove the cord and plug and directly wire it to an electrical box. There are two things I need to point out. First is the rubber seal that the tailpiece pipe mounts to on the disposal. It’s not the typical O-ring that I’ve seen before. It is a type of O-ring that fits around the flange on the tailpiece. Even better than just an O-ring. But I couldn't find it at first. That’s because it’s on the included Black Elbow. Black on Black doesn’t stand out too well. See photos. Anyways, I removed it and put it on my straight white tailpiece. I also had to shorten my tailpiece about a half an inch. The Frigidaire is slightly wider than the Whirlpool-Insinkerator it replaced. Second is to use the screws that secure the metal plate holding the tailpiece that came with the disposal. I know this may sound like a no-brainer, but in my 35+ years of service work I have seen a lot of crazy things and it’s not that uncommon for someone to reuse old parts like simple screws and such on something new if they look identical and are in good shape. And in my case the screws did as the disposal I was replacing is only 5 years old and looks new externally. But, the screws, even though they looked identical, in my case had different threads. If you’re going to be hooking up the drain from your dishwasher to it, it has a port for that, and knocking out the plug was easy. Just follow instructions and see my photos. I couldn’t use the magnetic catch ring on my installation because my cast iron sink is too thick and there’s not enough of a gap between the sink and disposal to install it. If you have a typical stainless steel sink, this shouldn’t be a problem. Other types, like granite or composite, might be too thick and not leave enough room to put it. There’s a reset button (breaker) on it in case the motor gets stuck. This prevents it overheating and shorting the windings. The rubber removable splash guard comes out for easy cleaning and removal of anything that gets in it by accident, won’t grind up or jams it up. See instructions on how to deal with a jam up. Speaking of jam ups, Of most of the jam-up disposal calls I did back in the day, they were almost always caused by someone cleaning out their aquarium and some stray gravel got stuck in it. Included is a stopper for filling the sink and keeping waste from flying out if the rubber splash guard flaps are not enough to do it. Conclusion: I ran it hard to test it out. I put everything from carrot pieces to ice in it and it performed with no problems. It is much quieter than the disposal it replaced. Highly recommended.

I took the time to install the Frigidaire 3/4 HP disposal last week. I replaced a ½ HP Badger Insinkerator that has been in operation for longer than I have owned my home – 10+ years. I am pretty handy, and have done plenty of plumbing tasks, but this was my first garbage disposal install. I usually use my disposal for clearing random food waste off plates after rinsing them off, and not so much for mashing in vegetable peels and other heavy processing. The toughest things I toss into my disposal would be ice and some citrus pieces for cleaning. I always used the disposal as a backup for what didn’t scrape off into the trash. To that point I would find myself running the disposal every other day to keep it cleared out, and to mitigate build-up. One of my complaints of my old unit was the volume and vibration. With that being my main areas to address I was looking forward to testing out the Frigidaire 3/4 HP disposal. The Badger Insinkerator I had is one of the most common disposals out there, so what I note as improvements or differences likely apply to a lot of households with older units. The Frigidaire boasts a couple of novel improvements over my old Badger. The upgraded power is the first thing I noted – increasing from 1/2 to 3/4. This provides greater torque for tougher grinding tasks. It also has swiveling impellor blades, which I would assume provide resistance to jams like my old fixed bladed disposal. The splashguard is removable (a welcome improvement), which allows for easier clearing of blockages or retrieving items that fell into the drain. There’s also the BIOSHIELD antimicrobial coating to help reduce odors. The Silver Guard, which helps catch wayward metal objects before slipping into the drain is a cool feature. Its a magnetic ring that wraps around the outside of the drain under the sink, and can help magnetically catch any ferrous metals (sterling silver, and good quality stainless won’t be caught). The power cord is also integrated on this unit but can be hardwired as well. The disposal also has a 10 year warranty for breakage during normal usage and a lifetime warranty against any corrosion related problems. Installing the disposal required the removal of my old one. This was the hardest part of the installation process. I removed the drain fittings connecting the disposal to my dishwasher and the house plumbing, and moved them somewhat out of the way. I thankfully had all of the tools I needed to remove the old disposal, including my little Z-shaped double end screwdriver. If you don’t have one of these, google it, and go buy one because it makes the removal 10X easier. I popped this tool in the circular openings of the threaded metal shroud mounted underneath and got to work. I had to apply pressure to the tool while hammering it to get the disposal body to start threading off the undersink mount. I stacked up a support structure underneath the disposal body to help hold it while I spun it off. Once it was free I let the excess water drain out and I set it aside. From there it was just a matter of unscrewing the 3 undermount screws and popping the retaining ring off to get all of the old hardware removed. I cleaned everything up to a shine and got things ready to install. I bought a roll of plumbers puddy tape since I only needed a little bit for this job – it was 5 bucks at Lowe’s. I applied this to the underside of the new drain sleeve and inserted it into the sink. I tossed a towel over it and set the old disposal on top of it just like in the instructions. From there it was just following the assembly diagram and stacking the parts in the correct order. Bolting the threaded undersink mount was straightforward, and looked just like the one I had removed. I assembled the tailpiece pipe onto the disposal and screwed down the mounting flange. The tailpiece has a rubber gasket in place on the end already, so no need to hunt for that part. I made sure the orientation of the pipe was as vertical as possible since adjusting later would be difficult. Per the instructions I popped out the plug stopper on the dishwasher connection. After that was done, I was ready to install the disposal body. I planned ahead when installing the undersink mount so that the threading location would leave the tailpiece lined up with my existing plumbing. Threading it on I used the same Z-tool to rotate it into place, and some taps from the hammer to snug it up. Once it was on, I wrapped the Silver Guard around the drain insert and snapped it together. The tailpiece didn’t perfectly lineup since it had a slightly shorter elbow than the old one, so I had to move my pipes around to fit. I threaded everything back together, hooked up the dishwasher line and plugged it in. Overall, it took about 1.5 hours start to finish, so not too bad. For installation you can also choose to hardwire the electrical connection. The instructions take you through removing the cord and trimming the wires to prep the connection. You will need an additional metal strain relief (I think 3/8”) to clamp the incoming wire, and protect it from any sharp edges. This gives you the flexibility to power it however you choose. Operation wise the Disposal works great. Flip on the switch and it spins to life. It has a distinctive electric motor whir that you can easily hear when it spools down. For volume it is exactly as loud as my old Badger (nearly identical dB meter readings). I accept that I am getting the same amount of noise while increasing power 50%, so that is impressive. The quality of the noise is better though – my Badger was a rough churning noise compared to smoother sounding output of the Frigidaire. Vibration is also greatly reduced. I used to get some harmonic vibrations from the old disposal, but now I don’t feel much at all. The vibrations appear to be dampened out really well, which keeps noise down across the household. Its still too early to assess how well the BIOSHIELD works as food gunk will need some time to build up/fester before it becomes pungent. The Silver Guard has already caught a few of my kids smaller metal forks/spoons, which has been great. Retrieving their plastic utensils that make it down the drain is a lot easier and less gross with the removable splash guard. So far I have fed the disposal my normal ice and citrus pieces, and it powered through that without any issue. The ice was handled much easier than on the outgoing unit, so I am happy to witness to bonus power being used. I went against the norm for myself and ran carrot peals, strawberry heads, and other trimmings down the disposal. No issues found at all, and everything was pulverized. Overall, this is a nice garbage disposal. It has plenty of power to churn through everything I would throw at it. It has more power than the outgoing unit while not increasing the noise levels. Vibrations were significantly reduced, which I appreciated the most. The added features of the Silver Guard and the removable splash guard are welcome changes for sure, and something I have already utilized a couple of times. Installation was really no different than any other garbage disposal I looked at, so there were no major headaches putting it in.

Not even a month ago, the disposal that came with the house I bought in 2019 died on me. Replaced an old Badger 1/2 HP with this 3/4 HP big boy. My experience is going to be doing a replacement instead of a new install. Luckily my house came with an outlet beneath my sink area so power was no issue for me. Make sure to take a look under your sink to see if that will be an issue. The box came with everything needed to either replace an old disposal or simply install it fresh except for the hose to your dishwasher (so you will use the existing one). Start to finish took me about 40 minutes as this was the 2nd ever I have replaced so I was reading the installation guide like crazy. Very easy to follow along so you don't miss anything. Even though this Frigidaire is bigger than my old Badger, it fit perfectly into the existing piping. Though I did remove and did a thorough cleaning job on all the pipes. It twisted and mounted perfectly into the existing clamp and locked into place. Removed and replaced all seals to make sure a tight, leak-free fit and then it was off to the races. Disposal itself is a lot powerful and quieter than my old unit and chewed up a family of four's uneaten meals with no effort. A cool and neat feature is the installation of the magnetic ring that fits near the neck of the unit. It is supposed to catch metal utensils or maybe even a metallic ring before it gets shredded to oblivion or damaged. Overall I am highly satisfied with Frigidaire and this well built disposal.

Frigidaire designed a disposal that met my expectations. Easy to install, plug in cord, (I added an outlet to the dishwasher circuit box of my 1st home in 1981) making jams safer to clear by unplugging the disposal, sound deadening surrounding the impeller housing for quiet operation, easy to find reset circuit breaker for overload protection right on the front, powerful 3/4 H.P. motor for effortless grinding operation from the sharp impeller, sink stopper and a NEW feature, a magnetic silverware ring surrounding the top neck of the disposal's inlet funnel. A real safety feature when you consider how likely that can happen in one's daily use. A laundry list of cool features and notice what was first? Ease of installation. For me, that is a must. The design was just what I hoped for. A large flathead screw driver acting like a pry bar, a #2 Phillips screw driver, and a 5/16" nut driver for the dishwasher hose screw clamp. I followed the included booklet instructions. First removed the old unit (working great since August 2006). Then I cleaned up everything I could see, sink flange top and bottom, dishwasher hose connector and waste pipe that attaches to the black disposal's outlet pipe. Since I was connecting the dishwasher, I remembered to POP OUT the disposal port PLUG. Didn't need to deal with that mistake ever again! The shroud around the unit's body makes it a tad tough to connect the dishwasher hose, but a visual check before tightening the screw clamp confirmed it was securely in place. The unit hangs from a well-made twist on housing clamp. My total install time including checking for leaks was about 90-minutes. The unit is so quiet. Best of all, a ten (10) year warranty. I likely will never need it. Remember to unplug the disposal when you ever need to clear a jam. It will happen someday, so stay safe.

I thought all garbage disposals we're made the same. I have just bought cheap disposals and just used them till they died. After installing this Frigidaire disposal I was really shocked.... We'll get to that in a bit. Let's talk about installation. So WARNING, you need to make sure this disposal fits your current sink drain line and other equipment below. I first wanted to install this in the main part of my house but found that the upper bell conflicts with the 1-1/2 inch connection that I specially built because of my waste line for my Reverse Osmosis system. Make sure you measure your existing sink and piping and other equipment first prior to buying. Luckily I have a second sink that was wide opened to install and test it out. I swapped out the existing and did it in 5 minutes. The disposal comes with all the needed cam system to attach to the sink and best of all it comes with a power cord. It also came with a magnetic ring to use on the cam so that it will help prevent utensils from falling in. Neat but I am not sure if the magnet is strong enough. It did catch a spoon a little as I intentionally dropped a utensil near the opening. Operation was where I was really shocked and surprised. This this is SUPER SUPER QUIET! Holy cow... At first switch a small kick but after that it was stealth in sound... It is also super strong. I threw a bunch of stuff down it and it made mince meat out of everything I fed it... I am sold on this product. Not all disposals are made the same. Well worth the investment. Good job Frigidaire. I would recommend this product.

Things like a Garbage Disposal are items in your home you may not realize how much you rely on them but never thing about what all goes into making them great. I was excited to upgrade mine to the new Frigidaire 3/4 HP unit and so far its been a well worthy upgrade! PROS: - The design of this disposal is great! Love the color, the smooth design, and just looks like a nice modern piece. - Installation takes time as you would expect, but overall it is pretty easy. Just follow the instructions they provide and make sure you have a nice tight water seal at the sink before starting to use. I think most people would be able to install this piece as it is not as intimidating as you might think! - I do like that this unit has a dishwasher drainage attachment as well! I am not sure if it is stated in the specs but I do want to confirm that and it worked well with my existing hookup. - The HP is has is fantastic! I can definitely see a big change from my previous unit and it handles jobs a lot quicker with that bigger horse power. Definitely a nice strong feature! - Another feature I really like is the anti microbial coating it has to provide some relief to any odors that might come with it. I have not noticed any bad smells so far and I am sure this is helping! - Next, the silver guard it has is a really clever feature. Basically it has some magnets to the outside of the rim that catches metals before they fall into the disposal. Once again a well thought out addition to disposals which often have people losing things inside of them. - Lastly, I love the 10 year warranty as well! I have no concerns this unit will work for decades to come but it’s just nice that Frigidaire has that much confidence in their products. CONS: - The unit is a little tall and I wish it was a bit more compact. BOTTOM LINE: - If you are looking to buy a disposal, this unit is an excellent choice! I have been very impressed with how well it handles any food I put down the drain in a quick, efficient manner. It has some really nice features like its odor stopping tech and magnets to catch your silver from falling in. The installation is straight forward and I think most can handle it too! Overall this is a great buy for a new sink or an upgrade on your existing one!

Rated #1 in convumer review magazine and I can confirm it is superb - quiet, thourough, and most importantly, the rubber guard over the drain is removable for cleaning. My Insinkarator was not and got dirty and smelly. Highly recommended.

Gets the job done. Surprisingly, there’s no tricks here, there’s no separate app to download to control your garbage disposal or adding it to your Wi-Fi network, this is Best Buy selling a “dumb” (i.e. non-smart home device) but necessary, kitchen appliance. I’m a novice to garbage disposals so it’s tough for me to comment on how much horsepower is enough, but I have a family of four and I can say this Frigidaire does the job. IN THE BOX Obviously you’ll get the disposal in the box. It’s pretty big, but not any bigger than other disposals of similar power - it’s just something I never really look at since it’s under the sink. There’s a cord that comes with it, which requires you to plug it in. IMPORTANT, if you don’t have an outlet under your sink, you might want to look elsewhere. The cord is 3 feet which should be plenty long. You also get a drain tube. It comes with a sink flange, but you might not need it depending on your situation (i.e. if you’re just attaching the motor to the existing flange. INSTALLATION This is by no means an instructional review on how to install a garbage disposal. And there’s nothing particularly special re the install re this disposal compared to others. So, I’m just speaking to those DIYers out there who need a disposal and are looking to install it themselves. I’m no plumber, but I know my way around most tools, and I found the installation process to be very easy. I’ll note I didn’t replace the flange (which requires plumbers putty) I simply used the existing one and exchanged the motors. I was done in relative short order. But even if you are replacing the hole thing, or putting a disposal on a new sink, all you need are a few tools and a couple of YouTube videos and you should be able to get the job done. Plus, the instruction manual is pretty handy in this regard. PERFORMANCE There’s really not much to say about garbage disposals. The biggest thing is, do they work in grinding up food and are they loud? This ¾ HP model is good at grinding food and it’s not terribly loud. Sometimes when first turning it on I hear it kind of wind up, but it’s surprisingly quiet compared to my old disposal. I never found the volume of a disposal to be much of an issue; I’m rarely talking to someone while cleaning the dishes and disposing of food. But maybe you don’t want to wake up the family cleaning later in the evening. I obviously can’t give you a decibel rating, but just anecdotally, I think it’s pretty quiet for what it is. I haven’t had it long enough to drop foreign (i.e. non food items) in it. So I can’t speak to its durability of having metal, for example, in it. The box claims it has a magnetic ring built in to capture “most metal” before it goes into the drain. I haven’t tested this per se, and I don’t recall dropping any metal into it, so I can’t really test the veracity of this claim, but it seems like a nice idea. I’m guessing they’re thinking of rings coming off one’s hands. CONCLUSION A garbage disposal is the football lineman of the kitchen. They do all the grunt work and rarely get the praise, only complaints when not working well. It’s also not flashy, but I’d argue, an important piece of your kitchen. In that respect, this model handles most of what you throw at it. I’ve cleaned off dishes for a family of 4 with food on the plates and never worried that it wasn’t up to the task. And while I haven’t tested the other models, I think if you have the space, going for the middle of the road option (middle of the road in terms of horsepower) is a good balance of power/price/performance.

Outstanding garbage disposal. The magnet-driven motor takes some getting used to, and I was skeptical at first that it truly will never bind or get stuck. After replacing a couple of traditional garbage disposals over the years that have rusted out, this technology has changed the industry. It's quieter, more powerful, and more durable. The only catch, if you can call it one, is the sink flange it comes with doesn't allow high water flow. This is because the unit starts very fast and will fountain water (and food) out of the sink if it isn't in place. It's a very small trade off for a highly capable garbage disposal.

It’s quite and works as it should! Easy to install

easy to install and operate, so far is working great

Suddenly water leaks from my old garbage disposal and have to change it immediately. After deep research I found this one, because of its saying made with stainless steel and lifetime warranty, also the size is pretty good to match my old one garbage disposal, its excellent working and easy to install. I did install it My self and pretty easy works perfect.

So far so good, quiet and powerful. The baffle does make water drain slowly but it’s not a huge deal.

This item is compact, easily installed, and very quiet an durable.

So far so good, only a few weeks in of ownership. I generally base my reviews on reliability over time. At this point I will say that it is very powerful and extremely quiet during operation. I made my purchasing decision based on their 10 warranty. Compared to the unit I replaced this one beats it hands down. Just to say, when my wife first used it she didn't think it was working because it is so quiet, which impressed her, and she isn't easily impressed!

Much stronger than the original 1/3hp badger that it replaced and a lot quieter too. Included nearly everything needed to install. Only separate purchase was some plumbers putty which was under $3 to complete the installation. Quick, easy, and very satisfied with the results.

Bought this unit to replace my leaking Insinkerator. Upgraded from 1/3 hp to 3/4 hp. Major improvement, easy to install. I feel it's a much better value than Insinkerator. The Frigidaire is equally quiet, the tone is more pleasant.

A very Quiet garbage disposal operates as advertised