Greenworks - 24V Brushless Jig Saw Kit, 4Ah USB (Power Bank) Battery and Charger

There are so many jobs you can do with an oscillating multi-tool, and with the 20V cordless model from Worx, you can do even more. Multi-tools are designed to get into places where you can’t fit a large tool, like under the sink or reaching around pipes, and when you don’t have to worry about a cord either, you can get to work without getting tangled up or caught on something. Plus, with the Universal Fit System, this tool takes on all major brand’s accessories. It’s the ultimate in flexibility, utility, and portability. The blade operates at 3.2 of oscillation, and the variable speed control gives you a little or a lot depending on just what you need it to do. Plenty of accessories are included so you can get going right out of the box: 1 sanding pad, 30 sanding sheets, 1-1/8” wood cutting end cut blade, 1-3/8” bimetal end cut blade, 3-1/8” semicircle saw blade, on-board blade wrench, carry bag, and a 20V 2.0 Ah battery and 5-hour charger. You’ll constantly find tasks at home or on the job that are done better with this multi-tool. You’ll never use a putty knife again when you can scrape off gunk in a fraction of the time. You can even cut off corroded toilet bolts or rusty faucet nuts. Fit in new flooring by slicing up doorjambs to size. Or remove trim without damaging the wall. Do it all and do it better with the 20V Oscillating Multi-Tool from Worx.

The Worx Bladerunner Portable Tabletop Saw is really a table saw that you can take anywhere. Most table saws are enormous and can take up an entire dedicated table in your workshop—and forget taking them out of the workshop and to the job site. But the Bladerunner is made to give you the power of a much larger saw in a form-factor that makes it much more flexible. The rack and pinion fence system enables smooth and accurate cuts. And despite its smaller footprint (15-3/4” x 17”), the Bladerunner easily handles larger shelving and trim materials. It’s the ultimate DIY machine because you can take it anywhere around the house, so flooring, cabinets, racks, and railing projects are all accomplished much easier. Plus, it’s simple to use. This design allows you to keep both hands free, so you can fully adjust the material as you need to. The quick, tool-free blade change system is compatible with any 4” t-shank jigsaw blade. And the base provides on-board storage for its miter gauge, rip fence, and blades. With a stroke length of ¾” and a no-load speed of 3000/min you’ll have more than enough capacity and power to tackle jobs both big and small. Stop bringing projects to your table saw and start bring the Bladerunner to your projects.

The 20V 2-in-1 Axis Reciprocating/Jig Saw from Worx saves you time, money, and its compact design saves you from the ache in your hands and arms that typically come with using saws like these. At only 4.2 lbs, this tool is easy to control, which is essential for the complicated designs you expect to cut with a jigsaw. And its vibration-absorbing soft grip handle cuts down on much of the unpleasant motion that’s inherent in using a reciprocating saw. It runs at 3000 rpms with a 0.75” stroke length, which is enough to cut 2” into wood and PVC pipe and go 5/32” into steel plate as a jigsaw, and as a reciprocating saw it’ll cut 2” into wood, PVC, and steel pipe. The LED headlamp illuminates dark work areas. And the off switch locks into place to guard against accidental starts. The tool-free blade change system is easy to use and accepts all common reciprocating saw and jigsaw blades that you’ll find at any local hardware store. Don’t buy separate jig and reciprocating saws when the Axis was built from the ground up to accomplish the tasks of both in less time and with less strain on the user. This Axis comes with a 20V 1.5 Ah battery and 0.4A charger, which you can use with any tool in the Worx Power Share family. You save money in the long run when you can share batteries between the cordless tools in your collection.