Greenworks - 24V Cordless Brushless Jig Saw, with 2Ah Battery and Charger 3602002

DEWALT ATOMIC 20V MAX 4-1/2-inch circular saw (tool only) pairs brushless power with jobsite portability. The brushless motor delivers extended runtime and can cut up to 369 linear feet of 3/4 in. OSB when used with a DCB205 battery (sold separately). A removable auxiliary handle and a 1-1/2 in. finger trigger let you choke up for added control, while the bevel gear enables cutting 2x material at 90 degrees. On-board blade key storage, a hang hook, a dust port and an electronic blade brake provide convenience, cleaner work, and faster stops for safer operation. Cordless design increases mobility; battery and charger are not included.

This 20V Axis Reciprocating/Jig Saw 2-in-1 gives you a whole lot of tool(s) for the money. There’s no need to buy a separate reciprocating saw and jigsaw when you have an Axis. Worx engineers figured out that those two saws actually employ a similar motion to get their different jobs done, and designed a way to put that functionality into one tool. So you get the raw power of a reciprocating saw (3000/min of no-load speed) to tear down structures, but then the head folds down into the base to give you more balance to make those intricate cutouts that only a jigsaw can perform. Plus, there’s no cord to get in your way, so you’re free to move. And at only 4.2 lbs, you can work long hours without getting hand and arm fatigue. The jigsaw is made to cut through wood (2” cutting capacity), PVC pipe (2”), and steel plate (5/32”). While the reciprocating saw also cuts wood and PVC pipe at 2”, but steel pipe at 2”, too. And they both have a 0.75” stroke length. With a built-in dust blower, you’ll always see the shapes you’re cutting in jigsaw mode. And the safety lock-off switch prevents accidental starting. Get an innovative 20V Axis Reciprocating/Jig Saw 2-in-1 from Worx and get more done, with less strain on both your hands and your wallet.

The Worx Bladerunner Portable Tabletop Saw is really a table saw that you can take anywhere. Most table saws are enormous and can take up an entire dedicated table in your workshop—and forget taking them out of the workshop and to the job site. But the Bladerunner is made to give you the power of a much larger saw in a form-factor that makes it much more flexible. The rack and pinion fence system enables smooth and accurate cuts. And despite its smaller footprint (15-3/4” x 17”), the Bladerunner easily handles larger shelving and trim materials. It’s the ultimate DIY machine because you can take it anywhere around the house, so flooring, cabinets, racks, and railing projects are all accomplished much easier. Plus, it’s simple to use. This design allows you to keep both hands free, so you can fully adjust the material as you need to. The quick, tool-free blade change system is compatible with any 4” t-shank jigsaw blade. And the base provides on-board storage for its miter gauge, rip fence, and blades. With a stroke length of ¾” and a no-load speed of 3000/min you’ll have more than enough capacity and power to tackle jobs both big and small. Stop bringing projects to your table saw and start bring the Bladerunner to your projects.