Hartke - 250W Bass Guitar Amplifier Head
About This Item
- General
- Brand: Hartke
- Model Number: 2500
- Product Name: 250W Bass Guitar Amplifier Head
- Dimensions
- Product Width: 21 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Height: 6 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Length: 16 inches (The out of box length of the item. Length is measured as the longest dimension of the item.)
- Product Weight: 21 pounds (The out of box weight of the item.)
- Features
- Amplifier Type: Not Applicable
- Instrument Compatibility: Bass
- Gain Control: Yes
- Input(s): 1/4 in. audio
- Output(s): 1/4 in. audio
- Power
- Peak Power: 250 watts
- RMS Power: 250 watts (The maximum amount of continuous power the device is able to handle.)
- Power Source: Plug-in
- Voltage: 120 volts (Amount of power needed to support an electrical current.)
- Wattage: 250 watts (Measurement of electrical power.)
- Warranty
- Warranty - Parts: 3 years
- Warranty - Labor: 3 years
- Other
- UPC: 809164004967
Create your own unique bass riffs using this bass amp head's 10-band graphic EQ, contour controls and built-in compression for eclectic tone shaping. Tube emulation and solid-state preamps let you blend tonal warmth and crisp attack for optimal output.
- 250W RMS continuous power @ 4 ohms (180W RMS @ 8 ohms): For strong yet controlled power and clear sound.
- Designed to match most 250W or 180W bass speaker cabinets: For an ideal sound pairing.
- Tube emulation and solid-state preamps: Let you blend tube and solid-state tone for a precise balance between tonal warmth and crisp attack.
- 10-band graphic EQ: Along with high-pass and low-pass contour controls and a dedicated preset button lets you design and set a preferred equalization curve and easily shape your bass's tone.
- Built-in compressor: Helps prevent undesirable volume fluctuations and lets you emphasize a desired section of the frequency response for enhanced sonic punch.
- Protection relay circuitry: Helps prevent speaker overload and eliminates sonic bursts through connected speakers while turning the amp head on or off.
- Effects send and effects return jacks: Let you connect to outboard effects processors to add unique flair to your bass riffs. Effect balance knob lets you easily adjust the send and return signal to the speaker outputs.
- Active and passive 1/4" inputs: Accommodate the connection of active or passive bass guitars for use with a variety of guitar types. Two 1/4" speaker outputs for connection to a speaker cabinet (not included).
- 250W RMS continuous power @ 4 ohms (180W RMS @ 8 ohms): For strong yet controlled power and clear sound.
- Designed to match most 250W or 180W bass speaker cabinets: For an ideal sound pairing.
- Tube emulation and solid-state preamps: Let you blend tube and solid-state tone for a precise balance between tonal warmth and crisp attack.
- 10-band graphic EQ: Along with high-pass and low-pass contour controls and a dedicated preset button lets you design and set a preferred equalization curve and easily shape your bass's tone.
- Built-in compressor: Helps prevent undesirable volume fluctuations and lets you emphasize a desired section of the frequency response for enhanced sonic punch.
- Protection relay circuitry: Helps prevent speaker overload and eliminates sonic bursts through connected speakers while turning the amp head on or off.
- Effects send and effects return jacks: Let you connect to outboard effects processors to add unique flair to your bass riffs. Effect balance knob lets you easily adjust the send and return signal to the speaker outputs.
- Active and passive 1/4" inputs: Accommodate the connection of active or passive bass guitars for use with a variety of guitar types. Two 1/4" speaker outputs for connection to a speaker cabinet (not included).
Q: What is the weight of the amplifier head?
A: The amplifier head weighs 21 pounds.
Q: What is the peak power output of the amplifier head?
A: The peak power output of the amplifier head is 250 watts.
Q: Can the amplifier head be used with a 120-volt power source?
A: This amplifier head can be used with a 120-volt power source.
Q: What type of preamps does the amplifier head use?
A: The amplifier head uses both tube emulation and solid-state preamps. This blend allows you to combine tonal warmth and crisp attack for the best sound.
Q: Does the amplifier head have a tube emulation feature?
A: This bass amp head offers tube emulation and solid-state preamps for blending warm tones with a crisp attack.
Q: How many bands does the graphic EQ have?
A: This bass amp head features a 10-band graphic EQ for creating unique bass riffs.
Reviews
This product doesn't have any reviews yet.
Compare similar products
Create your own unique bass riffs using this bass amp head's 10-band graphic EQ, contour controls and built-in compression for eclectic tone shaping. Tube emulation and solid-state preamps let you blend tonal warmth and crisp attack for optimal output.
HX Stomp is a professional-grade amp and effects processor that delivers the sound of Helix in an ultra-compact pedal. The same SHARC DSP chip found in our flagship Helix processor enables HX Stomp to run up to eight processing blocks simultaneously, with pristine audio quality, making it the most powerful and flexible stompbox-sized amp and effects processor currently available. Use it as a “super stompbox,” a backup or travel rig, an add-on tone expander with other modelers, a professional-quality audio interface that simplifies home recording, or even a complete guitar or bass rig. HX Stomp also contains the same HX models found in Helix products—more than 300 amps, cabs, and effects, including world-class polyphonic pitch-shifting effects. There are also presets created specifically for bass players, as well as individual bass amp and cab models. Additional features include a choice of true bypass and DSP bypass with trails, a stereo effects loop to integrate external devices or employ 4-Cable Method, a jack for two external footswitches or an expression pedal, extensive MIDI control, third-party IR support, and a multichannel 24-bit/96kHz USB audio interface. The free HX Edit app lets you create, save and load presets, and customize nearly all pedal parameters. It’s also a preset librarian, IR loader, and more.
The MS-2 is a 1W micro stack guitar amplifier that may be small but delivers the true Marshall tone. Powered either by batteries or plugging into a power supply, it’s versatile enough to play on the move or practice in your bedroom. The MS-2 features volume, tone and overdrive controls, and is available in a variety of colours and styles: black, red, or classic dark grey.
Product Details Description: This versatile 4-channel audio mixer is perfect for DJs, recording studios, and live performances. Featuring 2 mono channels and 2 stereo channels, it supports both XLR and unbalanced 1/4" inputs with +48V phantom power for condenser microphones. The Bluetooth functionality allows seamless streaming from your phone, tablet, PC, or laptop. With a built-in USB interface for PC recording, it’s compatible with software like "Audacity" for easy music production. Customize your sound using the 2-band equalizer, and add depth with the repeat & delay effects. Compact and durable, this mixer is ideal for any DJ equipment or music studio setup. 1: MULTIPLE CONNECTIVITY - Seamlessly connect a variety of devices with versatile input and output options, including RCA, AUX, and USB, to enhance your setup for DJ controllers, mixing boards, and sound mixers. 2: LARGE DIGITAL DISPLAY - Provides accurate and clear visual feedback for audio levels and important settings, enhancing accuracy, flexibility, and ease of use. 3: USER-FRIENDLY CONTROLS - Features intuitive, easy-to-use knobs and buttons for quick adjustments. Whether you're a beginner or a pro, this mixer audio allows you to fine-tune your sound. 4: STURDY AND PORTABLE - Built to be lightweight yet durable, this audio interface is ideal for mobile DJs, live performances, and studio setups. Take your soundboard or DJ mixer board on the go with ease. SPECIFICATIONS: 4 Channels (2 Mono, 2 Stereo) Bluetooth 5.4 | USB | MP3 +48V Phantom Power 2-Band EQ | Delay Effect Frequency: 20Hz-20kHz Voltage: 100-240V PACKAGE INCLUDES: 1x 4-Channel Audio Mixer