Heil Sound - DT-1 Flush Mount for PL2T, SB-2 and HB-1 Boom Arms, 1/2" Stem Insert, 1-1/2" Desk Mount Installation
Reviews coming soon
About this product
The Heil Sound DT-1 is a flush mount designed for use with PL2T, SB-2, and HB-1 boom arms, providing a fixed mounting solution for microphone stand setups in studio, streaming, podcast, and recording environments. It installs directly into a desk or tabletop surface using a required 1-1/2″ hole and secures from below with a washer and nut system, creating a stable attachment point without the need for clamp or c-clamp mounts. The integrated brass insert supports boom arms with a 1/2″ stem, allowing proper connection for compatible poles, rods, or articulating boom arm systems. Designed to fit surfaces ranging from 1/2″ to 2″ thick, it functions as a low profile desktop base for mounted microphone holders and support arms used in audio, video, and content creation setups.
Low Profile Desk Mount for Microphone Boom Arms
Designed as a low profile desktop mount, this base supports compatible microphone boom arm setups including PL2T, SB-2, and HB-1. It functions as a fixed holder and mounting point for mic stand systems used in streaming, podcast, audio recording, or studio environments. Ideal for desk or tabletop installation where a clean, mounted boom arm setup is preferred over clamp-based stands.
Desktop Mounting Base for Mic Stand and Boom Systems
This mounting base installs directly into a desk or table, serving as a stable attachment point for microphone stand and boom arm configurations. Unlike clamp or c-clamp type mounts, it integrates into the surface for a permanent solution. Suitable for studio, gaming, streaming, or content creation setups requiring a dedicated mic holder support system.
Secure Under-Desk Mount with Washer and Locking Nut System
The mount uses a bolt-style fastening system with washer and nut tightened below the desktop, creating a secure attachment. Designed for mounted microphone boom arms, it supports stable positioning for podcast, interview, or recording use. This setup eliminates reliance on clamps or jaws, offering a fixed alternative for users building a permanent studio or workstation.
Brass Insert Adapter for 1/2″ Boom Arm Pole Connection
Features a brass insert that acts as an adapter for boom arm poles with a 1/2″ stem. This connection supports proper alignment between the mount and microphone arm extension, rod, or gooseneck-style boom systems. Suitable for studio audio setups using compatible mic stands, holders, or articulating boom arm accessories.
Fits 1/2″–2″ Desk Thickness with Standard Mount Hole Size
Compatible with desktops from 1/2″ to 2″ thick, this mount requires a 1-1/2″ hole for installation. Designed for tabletop, desk, or studio furniture applications, it supports mounted microphone stand systems in streaming, gaming, music, or audio production setups. Includes the mount component needed for installation into supported surfaces.
- BrandHeil SoundModel NumberDT1Product NameDT-1 Flush Mount for PL2T, SB-2 and HB-1 Boom Arms, 1/2" Stem Insert, 1-1/2" Desk Mount InstallationProduct Height4 inchesProduct Length4 inchesProduct Width4 inches
Reviews
This product doesn't have any reviews yet.
Compare similar products
The Heil Sound DT-1 is a flush mount designed for use with PL2T, SB-2, and HB-1 boom arms, providing a fixed mounting solution for microphone stand setups in studio, streaming, podcast, and recording environments. It installs directly into a desk or tabletop surface using a required 1-1/2″ hole and secures from below with a washer and nut system, creating a stable attachment point without the need for clamp or c-clamp mounts. The integrated brass insert supports boom arms with a 1/2″ stem, allowing proper connection for compatible poles, rods, or articulating boom arm systems. Designed to fit surfaces ranging from 1/2″ to 2″ thick, it functions as a low profile desktop base for mounted microphone holders and support arms used in audio, video, and content creation setups.
Enhance your audio recording or streaming setup with this full motion microphone boom arm designed to deliver precise positioning and stability. Engineered to support most microphones with 3/8" or 5/8" threading and up to 2.2 lbs, this durable arm gives you full range of motion for optimal voice capture. Built‑in friction control helps keep your microphone firmly in place, while the integrated internal cable management system hides wires for a tidy, professional setup. The clamp or grommet mounting options make installation easy and secure, ideal for podcasting, broadcasting, meetings, content creation, or voiceovers.
Hold your microphone in place for steady recordings with this RODE professional studio arm. The fully damped springs and rubber contact points help minimize mechanical noise, while the 360-degree rotation allows flexible placement of your mic. This RODE professional studio arm is compatible with most microphones for versatile use, and the cable management system ensures a tidy installation.
The Heil Sound FL-2 Flange Mount is a surface-mounted desk mount designed to provide a fixed base for compatible mic arm or microphone stand setups. It attaches to a desk, table, or tabletop using three included screws, creating a stable mounting point for supported boom arms such as the PL2T, SB-2, and HB-1. The flange base includes a built-in locking mechanism that allows the boom arm to be tightened and held in a chosen position, supporting controlled placement during use. A brass insert with a 1/2-inch thread serves as an adapter connection for compatible arms or extensions. Its low-profile design integrates into desktop or studio workspaces, offering a structured alternative to clamp-based mounts for applications such as podcasting, radio, music production, or general audio setups.
| Pros for Heil Sound - DT-1 Flush Mount for PL2T, SB-2 and HB-1 Boom Arms, 1/2" Stem Insert, 1-1/2" Desk Mount Installation | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Stability, Build Quality, Setup, Cable Management | There were no pros for this product— |
| Cons for Heil Sound - DT-1 Flush Mount for PL2T, SB-2 and HB-1 Boom Arms, 1/2" Stem Insert, 1-1/2" Desk Mount Installation | |||
| There were no cons for this product— | There were no cons for this product— | Noise, Price | There were no cons for this product— |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Neewer - Suspension Boom Mic Arm Stand - Desk Mount with Adapters for Blue Yeti, HyperX & Shure Mics
$24.29The price was $26.99
$25.19The price was $27.99
Immerse yourself in sound Sponsored
Keep exploring
$107.25The price was $112.61
