HQRP - 2-Pack 3.5 mm TRS Stereo Male to RJ45 Female Audio Adapter - Cat 5/6 Extension 8 in - Black

3.5 mm TRS Stereo Male to RJ45 Female Adapter cable designed to extend stereo audio over Ethernet wiring using Cat 5 / Cat 6 UTP twisted pair cable. This 8 in / 0.7 ft adapter converts a 3.5 mm TRS stereo output to an RJ45 connection so you can route audio across longer distances where standard aux cables are impractical, supporting clearer, more stable runs through existing network-style cabling. Plug-and-play design makes setup simple with no tools or drivers required, and in most installations two adapters are used, one at each end of the Ethernet cable, to complete the audio link. Compatible with stereo amplifiers, speakers, touch devices, song decks, KTV touch screens, and other equipment that uses a 3.5 mm TRS stereo connection. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.

HQRP unbalanced angle adapter set designed to connect a 3-pin XLR female cable end to a 1/4 in / 6.35 mm TS male mono input when you need flexible routing in tight spaces. Each adapter features a low-profile L-shape and an adjustable body with four positioning options (right, left, up, down 90 degrees) to help reduce cable strain, keep plugs clear on crowded stages, and maintain cleaner cable runs in racks and pedalboards. To adjust the angle, remove the screw, gently pull the connector from the housing, rotate to the desired position without exceeding 360 degrees, then reinsert and tighten the screw. Built for pro audio use and compatible with mixers / microphones / amplifiers / EQ / rack gear / keyboards / guitars / electric piano / electric drums, these adapters are suited to studio recording, live sound, rehearsals, and home audio setups where a secure mono TS connection is required. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.

This 2-pack of 3-pin XLR male to RJ45 adapter cables is designed to let you route DMX512 or XLR signals over standard Cat5 / Ethernet cabling, helping you extend and transfer control signals when dedicated DMX cable runs are inconvenient. Each adapter measures 8 in / 0.7 ft, making it easy to patch between equipment while keeping connectors accessible. Built with a strong, elastic cable jacket to resist stretching and support frequent setup and teardown, these adapters provide a stable connection at both the XLR and RJ45 ends to help maintain reliable signal flow. Compatible with DMX-CON Controller Series, this solution is well-suited for LED RGB strip control systems, stage lighting, and recording studio or remote location work, and it can also be used with amplifier, mixer, and other musical equipment where XLR-over-Ethernet style routing is needed. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.