The Audio-Technica AT-VMx series enhances its premium dual moving magnet cartridges with greater warmth detail and realism. Featuring dual magnets aligned to the stereo groove it delivers excellent channel separation and frequency response. Upgrades like PCUHD® copper wire and reduced coil turns improve clarity and transient response. The paratoroidal coil design and center shield plate reduce crosstalk for a cleaner stereo image. Practical features include easy-mount threaded inserts and a V-cut stylus guard for precise placement making the VMx series a refined user-friendly choice for high-quality vinyl playback.The lightweight microlinear stylus of the AT-VM740xML allows it to trace the record groove with incredible accuracy resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match.FeaturesAT-VM740xML VMx Microlinear Phono CartridgeMicrolinear StylusParatoroidal Coils Improve Channel Separation Channel Balance and Transient ResponseCenter Shield Plate Reduces CrosstalkDurable Low-Resonance Polymer HousingAluminum CantileverCompatible with Any Turntable Headshell That Accepts 1/2” CartridgesAll in the DesignThe Vertical Dual Magnet (MM) design closely mirrors the cutter head used to make the vinyl master. The cutter head uses two transducer coils mounted perpendicular to each other at 45° from horizontal to cut the channel: one in each wall of the 90° record groove. AT-VMx cartridges use the same 90° V-Shape configuration as the cutter head. This way the cartridge achieves accurate tracking excellent channel separation high definition of the stereo image and extreme clarity over the entire audio spectrum.Easy to Install & UseEach VMx cartridge body has threaded inserts enabling it to be mounted to a headshell with just two screws – no nuts required. And the redesigned stylus protector now includes a V-cut for easy reference of the stylus’s position when lowering it onto a record.&

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. FeaturesVM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylusAluminum cantileverSpecially wound coils increase output voltageDurable low-resonance polymer housingThreaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts requiredCompatible with any AT-VMN95 replacement stylusWhat's in the BoxAT-VM95E Dual Moving Magnet CartridgeTwo 11mm installation screwsTwo 8mm installation screwsTwo washersSpecificationsFrequency response: 20 - 22000HzChannel separation: 20dB at 1kHzVertical tracking force: 1.8 - 2.2g (2.0g standard)Stylus construction: Bonded round shankRecommended load impedance: 47000 ohmsOutput: 4.0mV (1kHz 5cm/sec)Channel balance: 2.0dB (1kHz)Stylus shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeMount: Half-inchReplacement stylus: AT-VMN95ECoil impedance: 3.3k ohms (1kHz)DC resistance: 485 ohmsLoad capacitance: 100 to 200pFCoil inductance: 550mH (1kHz)Vertical tracking angle: 23°Dimensions (H x W x D): 0.68" x 0.74" x 1.2"Weight: 0.22 ounces

Bona Fide PrecisionThe 2M Bronze is designed to give the music a whole new dimension of precision. Mounted on Ortofon’s classic SH-4 headshell the sturdy slim-design offers strength and delicacy complemented by an ergonomic easy-to-lift finger grip. Simplify your setup while embracing quality.FeaturesNude Fine Line StylusSplit Pole Pin TechnologyOptimized Sound ReproductionAccuracy levelTo Ortofon hi-fi is more than a fancy label. High fidelity is the goal of everything they do. The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time and you get to fall in love with the songs all over. That is what hi-fi means to them and that is what you get with the 2M Bronze.StylusThe 2M Bronze features a Nude Fine Line diamond particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information.Split Pole Pin TechnologyThe 2M Bronze uses a special engine with quad coils featuring Ortofon’s very own invention: split pole pins upgraded with a silver-plated copper wire.SH-4 HeadshellThe 2M is mounted on a classic Ortofon SH-4 headsheel and is for customers who wish direct and easy mounting and replacement on their S-shaped tonearm.What's in the Box2M Bronze Premounted MM Phono CartridgeSpecificationsChannel balance at 1 kHz: 1 dBOutput voltage at 1 kHz 5cm/sec: 5 mVChannel separation at 1 kHz: 26 dBChannel separation at 15 kHz: 15 dBFrequency response 20 Hz - 20 kHz: 2 / - 0 dBTracking ability at 315Hz at recommended tracking force: 80 µmCompliance dynamic lateral: 22 µm/mNStylus type: Nude Fine LineStylus tip radius: r/R 8/40 µmTracking force range: 1.4-1.7 g (14-17 mN)Tracking force recommended: 1.5 g (15 mN)Tracking angle: 20°Internal impedance DC resistance: 1.2 kOhmCartridge color: Black/BronzeCartridge weight: 7.2 gPremounted cartridge weight: 16.7 gRecommended load