IsoAcoustics - OREA Bordeaux Isolator Feet for Audio Components and Turntables - Silver

Eliminates parasitic vibrations and providing greater sound clarity and focus. The OREA’s are ideal for electronic components including Amplifiers DAC’s CD Players Speakers and Turntables. Made of machined stainless steel these isolators have a low-profile design to minimize any increase in height.Each OREA model are designed for different weight capacities. They each have a coloured ring on the bottom isolator that denotes the model and weight capacity. The OREA series are packaged individually to allow greater flexibility when determining the number of units to use. We recommend a minimum of 3 units under each component depending on weight.The upper flange of the OREA’s are designed to provide a suction cup like effect and adhere to the underside of the component while the lower flange adheres to the supporting surface. All the energy is managed within the core of the OREA’s which are tuned to work within specific weight ranges. This results in greater sound clarity and a more open soundstage providing authentic three-dimensional sound.The existing feet on an audio component may connect well and fit nicely around the perimeter of the OREA isolator. Alternatively you may get better performance by either removing the feet entirely or placing the OREA’s beside the existing feet to have them connect directly to the chassis or base of the component.OREA Indigo - 16 pounds (7.2 KG) per isolatorTotal Weight Capacity = [Weight cap. per isolator] x [Qty of Isolators]What's in the BoxOREA Sound Isolating Foot (Single)SpecificationsDimensions (WxH): 2.3" x 1.3"Weight Capacity: 16 lbQuantity: 1 Unit (Single)

The ISO-200 isolation stand is 7.8” (200mm) wide x 10” (255mm) depth and is rated for monitors weighing up to 60lbs. The ISO Stands are the latest generation of IsoAcoustics stands designed for studio monitors. The ISO Stands are an updated version of the popular ISO-L8R series and features a lower profile new frame design and a newer version of isolator for improved performance.Offering 14 variations of height and tilt the ISO-200 will help you optimize the placement of your monitors and bring your tweeters to ear level. The IsoAcoustics patented isolation system provides superior isolation and decoupling from the supporting surface. The stands are biased to keep all energy in alignment with the speaker cones providing greater clarity and focus.Perfect for Optimizing the Placement and Performance of Small Studio MonitorsAn important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener and eliminate soundwave reflections off the supporting surface. In a typical Desktop Audio Workstation (DAW) configuration the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20″ above the work surface. Raising and tilting the monitors to the optimum position can be achieved in these circumstances using the IsoAcoustics stands.Exciting the supporting surfaceThe isolators manage the energy of the speaker to reduce vibrations resonating through the supporting surface to eliminate dissonant sounds in the listening area or joining rooms.Reducing internal reflections</

Eliminates parasitic vibrations and providing greater sound clarity and focus. The OREA’s are ideal for electronic components including Amplifiers DAC’s CD Players Speakers and Turntables. Made of machined stainless steel these isolators have a low-profile design to minimize any increase in height.Each OREA model are designed for different weight capacities. They each have a coloured ring on the bottom isolator that denotes the model and weight capacity. The OREA series are packaged individually to allow greater flexibility when determining the number of units to use. We recommend a minimum of 3 units under each component depending on weight.The upper flange of the OREA’s are designed to provide a suction cup like effect and adhere to the underside of the component while the lower flange adheres to the supporting surface. All the energy is managed within the core of the OREA’s which are tuned to work within specific weight ranges. This results in greater sound clarity and a more open soundstage providing authentic three-dimensional sound.The existing feet on an audio component may connect well and fit nicely around the perimeter of the OREA isolator. Alternatively you may get better performance by either removing the feet entirely or placing the OREA’s beside the existing feet to have them connect directly to the chassis or base of the component.OREA Bronze - 8 pounds (3.6 KG) per isolatorTotal Weight Capacity = [Weight cap. per isolator] x [Qty of Isolators]What's in the BoxOREA Sound Isolating Foot (Single)SpecificationsDimensions (WxH): 2" x 1.1"Weight Capacity: 8 lbQuantity: 1 Unit (Single)