Kensington - SmartFit Premium Heavy Duty Single Monitor Arm (K58273NA) - Unknown

Gas Spring assisted Full-Motion (tilt, swivel, rotate, and height adjustment) Articulating Single Monitor Desk Mount, 17" to 43" , each flat monitor weight up to 44 lbs (20kg), each curved monitor weight up to 40 lbs (18kg), Flexible Free Adjustment, Cable Management, Rotatable VESA Plate, VESA Pattern 75x75mm, 100x100mm, 200x200mm, Top Mount C-Clamp and Grommet Base.

The Kensington SmartFit Premium Heavy-Duty Single Monitor Arm is a gas-spring desk mount engineered for the oversized panels that standard arms cannot carry, supporting displays up to 49 inches in landscape orientation or 35 inches in portrait. Its load rating of 44 pounds covers heavy ultrawide and curved monitors, and the VESA plate accepts 75 by 75, 100 by 100, 200 by 200 and 300 by 300 mm hole patterns so large-format screens with widely spaced mounting points fit without an adapter. The counterbalanced gas spring lets a screen be repositioned with one hand across a height range of 7.6 to 18.9 inches, and the same range applies to reach, so the panel can be pulled forward for detailed work or pushed back to open up desk space. Articulation covers 360 degrees of rotation for switching between landscape and portrait, 180 degrees of swivel for sharing a view with a colleague, and 70 degrees of tilt to cut reflections from overhead lighting. Construction combines aluminum, steel and reinforced plastic in a black finish, with the assembled arm weighing about 9 pounds for the rigidity a large display demands. A desk clamp fits surfaces from 0.5 to 2 inches thick, and an integrated cable-management channel routes power and video leads along the arm and down the post out of view. The mount ships with the hardware needed for installation and is backed by a 5-year limited warranty with Kensington technical support, suiting trading desks, design studios, control rooms and executive workstations.

The Kensington SmartFit One-Touch Height Adjustable Dual Monitor Arm is a gas-spring mount that holds two displays from 13 to 34 inches on a single desk-mounted post, giving analysts, developers, traders and support teams a wider workspace without the clutter of two factory stands. Each articulating arm carries up to 19.8 pounds and attaches through a quick-release plate compatible with 75 by 75 mm and 100 by 100 mm VESA patterns, so most business monitors mount in minutes using the bundled tool kit. The counterbalanced gas spring allows one-touch height changes across a 170 to 505 mm range, letting each screen be raised or lowered with a light push once the tension is dialed in with the supplied Allen key. Every joint tilts and swivels through 90 degrees in either direction and the plates rotate for portrait orientation, so screens can be stacked vertically, angled inward side by side, or turned to read long documents and code. The steel and aluminum construction is finished in black and tested to ANSI and BIFMA standards for stability under daily adjustment. Mounting options include a C-clamp for desk thicknesses of 10 to 85 mm and a grommet fitting for surfaces of 10 to 80 mm, both non-permanent and non-marking so rented or shared desks are left undamaged. A built-in cable management channel routes power and video leads along the arms and out of sight. A single post keeps both screens on one compact footprint. Kensington supports the mount with a limited manufacturer warranty and professional technical assistance.