Lectronify - 100 ft 5-Pin XLR Male-to-Female DMX Cable, 110-Ohm OFC, 92% Braided and Foil Shielding, Nickel-Plated Connectors - Black
Reviews coming soon
About this product
The Lectronify 100' Studio Series 5-pin DMX cable is designed for accurate digital control-data transfer between DMX controllers and compatible lighting equipment in stage, theater, concert, club, event, installation, and DJ applications. It uses a 5-pin XLR female connector on one end and a 5-pin XLR male connector on the other, with nickel-plated connector hardware and chuck-style strain relief at the termination points. Four 24 American Wire Gauge (AWG) oxygen-free copper conductors, 110-ohm nominal impedance, 47 pF/ft capacitance, and 92% braided tinned-copper plus foil shielding help maintain signal integrity and reject electromagnetic and radio-frequency interference over long cable runs. Polyethylene insulation adds protection around the conductors, while the black flexible polyvinyl chloride jacket supports repeated setup, routing, storage, and professional use. 100' / 30.48 m cable length for extended DMX runs, 0.3" / 7.62 mm outer diameter, 1.4" / 35.56 mm bend radius, 55 lb / 24.9 kg maximum pull tension, -4 to 158°F / -20 to 70°C operating range, 4 lb / 1814.36 g product weight
PROFESSIONAL DMX CONTROL
100-foot 5-pin XLR male-to-female cable carries DMX and other digital data between controllers and stage lighting for theaters, concerts, clubs, and DJ rigs.
SIGNAL INTEGRITY
110-ohm impedance, 24 AWG oxygen-free copper conductors, 47 pF/ft capacitance, and 92% braided-plus-foil shielding help reject electromagnetic and radio-frequency noise.
DURABLE CONNECTIONS
Nickel-plated 5-pin XLR connectors use chuck-style strain relief to protect termination points, while the black flexible PVC jacket supports repeated setup and long cable runs.
INSTALLATION READY
Four conductors, 0.3-inch outer diameter, 1.4-inch bend radius, and a 55-pound maximum pull rating support routing across stages, venues, studios, and permanent lighting systems.
WIDE OPERATING RANGE
Designed for -4 to 158°F (-20 to 70°C), this shielded 100-foot DMX cable suits touring, live production, theatrical lighting, event rigs, installations, and rental inventory.
- Cable Length100 feetConnector Type (End 1)XLR5Gender (End 1)FemaleConnector Type (End 2)XLR5Gender (End 2)MaleIn-Wall RatedNo
Reviews
This product doesn't have any reviews yet.
Compare similar products
The Lectronify 100' Studio Series 5-pin DMX cable is designed for accurate digital control-data transfer between DMX controllers and compatible lighting equipment in stage, theater, concert, club, event, installation, and DJ applications. It uses a 5-pin XLR female connector on one end and a 5-pin XLR male connector on the other, with nickel-plated connector hardware and chuck-style strain relief at the termination points. Four 24 American Wire Gauge (AWG) oxygen-free copper conductors, 110-ohm nominal impedance, 47 pF/ft capacitance, and 92% braided tinned-copper plus foil shielding help maintain signal integrity and reject electromagnetic and radio-frequency interference over long cable runs. Polyethylene insulation adds protection around the conductors, while the black flexible polyvinyl chloride jacket supports repeated setup, routing, storage, and professional use. 100' / 30.48 m cable length for extended DMX runs, 0.3" / 7.62 mm outer diameter, 1.4" / 35.56 mm bend radius, 55 lb / 24.9 kg maximum pull tension, -4 to 158°F / -20 to 70°C operating range, 4 lb / 1814.36 g product weight
This 2-meter charge cable is made with a woven design — with USB-C connectors on both ends — and is ideal for charging, syncing, and transferring data between USB-C devices. It supports charging of up to 240 watts and transfers data at USB 2 rates. Pair the USB-C Charge Cable with a compatible USB-C power adapter to conveniently charge your devices from a wall outlet and take advantage of fast-charging capabilities. USB-C power adapters sold separately.
This 1-meter charge cable is made with a woven design with USB-C connectors on both ends, and is ideal for charging, syncing, and transferring data between USB-C devices. Pair the USB-C Woven Charge Cable with a compatible USB-C power adapter to conveniently charge your devices from a wall outlet and take advantage of fast-charging capabilities. USB-C power adapters sold separately.
Rexing CPW-52 Wireless CarPlay & Android Auto Adapter is designed for vehicles with factory-installed wired Apple CarPlay or Android Auto. It converts your existing wired system into a wireless connection, allowing you to enjoy navigation, music, calls, and messaging without plugging in your phone every time you drive. Compatible with iPhone (iOS 10 and above) and Android devices (Android 11 and above), CPW-52 delivers a smooth and reliable wireless driving experience with added convenience.
| Pros for Lectronify - 100 ft 5-Pin XLR Male-to-Female DMX Cable, 110-Ohm OFC, 92% Braided and Foil Shielding, Nickel-Plated Connectors - Black | |||
|---|---|---|---|
| There were no pros for this product— | Overall Performance, Compatibility, Cable Length, Flexibility | Overall Performance, Compatibility, Charging Speed, Portability, USB-C | Overall Performance, Connectivity, Size, Design |
| Cons for Lectronify - 100 ft 5-Pin XLR Male-to-Female DMX Cable, 110-Ohm OFC, 92% Braided and Foil Shielding, Nickel-Plated Connectors - Black | |||
| There were no cons for this product— | Heat Dissipation, Data Transfer | There were no cons for this product— | Heat Dissipation, Setup |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
