Metra - Axxess RCA Level Controller Interface - Multi

Product Features Universal Remote Level Control For Car Amplifier/Amp Bass Adjustment. Adjust the input level going to the amplifier. Mounts under dash or through hole. Connects between the amplifier and stereo via RCA connectors. One 2-Channel RCA input and one 2-channel RCA output. Perfect for Balancing the System to Changing Music Styles. Works with most Head Unit / Amplifier Combinations. Works in Home Audio systems. Simply connect your audio source into the RCA inputs and connect your RCA outputs into an amplifier. 1-year Manufacturer's Warranty. Installation Note: Don't forget, you are going to need to send signal TO the XBRC. So make sure to pick up a "patch cable" to go from your source TO the XBRC. NVX offers RCA CABLES in various lengths, to ensure you have the parts you need to get the job done.

Easily add an aftermarket amplifier to your vehicle’s factory audio system with the LocPRO 4-Channel Line Output Converter by PAC. The LP6-4 converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This four-channel line output converter can also be used to retain your vehicle’s OEM amplified audio system when replacing the factory radio.

Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level with all the sparkling highs and thunderous lows of your original audio. KISLOC2 Stereo Line-Output Converter Unlike traditional LOCs the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels. Using nothing more than your factory speaker wires the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source. Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on *Amplifier output of smart radio must have 60 impedance or lower. What's in the Box 46KISLOC2 line output converter Owner's manual Specifications Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on