Customer Ratings & Reviews

I was pretty sceptical of these at first but I'm actually impressed. I have them on an OtterBox case for a galaxy s22 ultra. They're sticking to the case very well. No complaints there. If you try and stick it to a piece of metal like a fridge or something the magnets will somewhat hold tomit but it will slide down because of the weight. If you put the rings to an actual magsafe magnet say a car mount they lock on very well. They do work through my thick case for wireless charging. My only complaint is the instructions and and the little piece of cardboard they give you to align it on your case or phone. If you try and center the lines the ring went right through the camera slot on my case so I had to offset it so it just cleared and it seems to be just fine. The instructions are crap. It just says line up the lines. These are a great way to turn an android phone into magsafe.

Have a Phone case without magsafe? Wish you could use it While still using Magsafe charging? Well, now you can! Attach this to the outside back of the case and you are good to go. The prefect way to bridge the gap. NOTE ( This may not work with all cases) like really really thick cases. Best way to test. Connect the ring to the magsafe Charger, then press the ring against the case to see if it will make contact with your phone thru the case and charge. I use a Skinit, Inner rubber with Hard outer shell case. The best they offer. I have had this case for 7+ years. Only needed to change this ring starting yr 6. The best add on, a pop socket that Snaps on the ring when not on the charger. Super Slim as well. I deff recommend this. Apple should have included this with every iphone.

Works great! Have it in a case for my Samsung S20 FE and it works perfectly in a Magsafe charger. Only downside is it has a bit of a sharp feeling edge as it sticks up a little, but hasn't cut me.

While not as strong as Id like it to be, the magnet was able to hold the weight of my phone upright on a fridge. Since this is merely an adhesive magnet for your phone, it got a little annoying to constantly have the raised ring catch on my pocket. I decided to modify my phone case to allow me inset the magnet for a better fit. The included alignment and application guide was helpful in getting my placement of the sticker right. Im able to use magsafe phone holders, case attachments, and the like on my cheap Nord N20 5g phone case, which brings me a step closer to matching Apple's overpriced features with a budget phone.

This may have potential for older phones with no MagSafe, but personally it's not meant for myself. I do have an iPhone 12 which has MagSafe, but with a few NON-MagSafe cases, applying the ring on the back of the actual phone (Did not apply the adhesive to my actual phone) and then placing the non-MagSafe case over it did not work at all for me. And this most likely due to the thickness of the case. I then tried this time actually using the 3M adhesive on the smooth back of the thin plastic-like Non Mag-Safe case, but the stronger magnet of the Apple MagSafe charger only ripped the ring "Snap Adapter off" the case after 3 removals, leaving it attached to the actual charger. I did not try the other ring on my other leather case. *In Morphie's defense, there are no photos of the rings attached to a case, only the actual phone in promotion photos, and the box itself, also using that phone "naked." This could work for some. The magnetic ring could also possibly attach better to certain back of cases, the texture may make a difference. I cannot confirm that right now. It IS a thin ring so that is nice, I noticed this briefly and it won't get in the way when holding the phone. It also does not interfere that much with a case over it. If the magents were a bit stronger, this could work better. The box comes with 2 rings and a size chart to help you align the rings to your phone.

This thing is holding up really well. The adhesive is pretty strong, it has been about 2 weeks since I have had it. I get to use my favorite case all the time now. It is paired with my magnetic Spigen dashboard mount.

Love them. Now I can use any case I want and still be able to use my MagSafe without having to take off my case. It also come with a template to help you put it on the case in the right spot.

Good product better price i would definitely recommend

The magnet and adhesive are very strong the only downside is that the ring is very thick

Excellent product. It sticks to the case without popping off when you attach / detach a mag safe stand to it that is detachable. Works great for my kindle. I purchased metal ring stickers on Amazon that just separated from the case when I pulled off the detachable mag safe stand.

Works perfectly, as expected. I'm actually an Android user and I can't live without these babies. Highly recommend!

Works as expected, got it for an Insignia case and it hasn't disappointed me.

I like Is really easy to use and practice I recomend

I rearevuews sayin the adhesive wasnt good but i have a fabric back case and so far its been perfect.

The best thing for support your phone,is very strong and cute

It works perfectly with a car mount. Its very strong and it wont fall.

The magnet is strong and makes it possible to use MagSafe holder devices for my non MagSafe iPhone (like car, desk stands, monitor stand to use continuity camera, etc). However, the magnet affects charging on an actual apple MagSafe charger. The phone gets hot, so it automatically slows the charging down and barely maintains the charge. I would plan to use a plug in charger. Also, I agree with other reviewers that this is annoying! The edges aren't smooth and get in the way of texting. It's not so bad that I won't put up with it for the function I get, but it would be much better if it fit on the phone under a case and still strong enough of a magnet. Sadly, I have an iPhone SE, which doesn't really have MagSafe cases available. If you can get a quality MagSafe case, use that 100% over this. Best Buy delivery service is amazing. I ordered a couple things, and this was delivered free within a day even though it's only $10.

The Mophie Snap Adapters are a practical solution for those looking to bring MagSafe compatibility to their non-MagSafe devices. This 2-pack of sleek, black adapters is a convenient and cost-effective way to upgrade your phone or accessories without investing in a new device. The installation process is straightforward, thanks to the strong adhesive backing that securely attaches the adapter to your device or case. Once applied, the adapter provides a reliable magnetic connection compatible with MagSafe chargers, mounts, and accessories. It’s an easy way to integrate the MagSafe ecosystem into your daily routine. Performance-wise, the Snap Adapters deliver as promised. The magnetic strength is impressive, ensuring a stable connection whether you’re charging your device or using it with a MagSafe car mount. The slim profile and minimalist design blend seamlessly with most devices, maintaining a sleek aesthetic. One potential drawback is that the adhesive is a one-time application, so you’ll need to be precise during installation. Additionally, the adapter may add a slight thickness to your device, which could affect compatibility with some tight-fitting cases. Overall, the Mophie Snap Adapters are a great investment for anyone wanting to experience the convenience of MagSafe without upgrading their device. With two adapters included in the pack, it’s a versatile and affordable solution for multiple gadgets.

[Employee of bestbuy] These are great to have for any non-magsafe phone case. Most of my phone cases already have magsafe in them, but I saw this really cute case and it didn’t have magsafe on it. My phone stand in my car is a magsafe charger and I didn’t want to buy a whole new stand just to use this case. I just had to buy the case and along with it, these magsafe rings. It instantly turned my case magsafe compatible. The only issue i really see is, you gotta make sure it’s in the right spot. Sometimes when using it, it doesn’t catch the charge on my phone stand and I should probably fix it, but I can’t really bother and I usually don’t care if it charges or not. It also will catch any lint or pull on some threads so be wary with your clothing. Overall, I highly recommend especially for magsafe product users.

I got a magsafe vent mount from a friend but since I use the iphone SE it was a nice gesture, but didn't really work. I found these and decided to give them a try. They work once you get it set right, but they need a couple of small tweaks. First, the adhesive doesn't stick to the glass back on the phone. first time I used it, it pulled off. Second, they don't really fit all that well under the case. Not sure if thinner would work, but pulling it off and sticking it to the outside of the case worked well. the adhesive grabbed and it's worked great since. Lastly, one thing that'd help is a small piece for the alignment tab on most "real" magsafes. Most things hold tightly enough, but I can see a battery pack in my future and wonder if it'll spin a bit without the tab. If you need to connect, these'll do it.