Customer Ratings & Reviews

This took a long time to setup. I mounted a 34 inch ultrawide monitor. The weight of the monitor was 17 lbs, so it fit in spec with this mount. The difficulty came in setting the correct tension for the vertical screen vesa attachment. I had to tighten it while using pliers so that the nut did not slip. Eventually got it to work, but it took 2 people because the lock nut kept stripping. It has held up well since then. If you have a smaller monitor and it weighs less I don't imagine it being as much as a hindrance. This product has held up well for as long as I've had it. The cable management tunnel is a good addition.

This product performs quite well. It holds the monitor solidly in an impressive array of positions. I did run into a problem though, and even though this has more to do with the monitor (and I'll probably post this in a review there), I'll share it here. I have the 27" curved Samsung CRG5 series monitor, and while the holes are spaced fine for that monitor, the design of the back of that monitor makes it impossible to attach all 4 screws. I am fortunate enough to have an angle grinder that i used to take off the excess tabs around the screw hole, but if you don't have that ability, know that your monitor may not work with this mount. The attached pictures will explain this better. Also, it's too early to judge the longevity of the mount and the piston, but if anything goes wrong, I'll update the review.

We live in an RV with the tv built into a televator on the desk. I needed a solution that would fold away when done working, the drop back down to perfect viewing angle for work the next day. Introduce these mounts! They work perfectly! With full motion I am able to swing the monitors fully against the sides of the wall to watch movies, then drop them right back down for work. They were easy to assemble, cords stay in place in them, and easy to adjust. You won’t regret buying these. Just be cautious when working with them. They are fast strut style, so the will extend on their own if you compress them. The bottom swivel at the base isn’t a full 360 degree spin. If I’m guessing, I would say it’s about 345 degrees, but not a big deal. Still much more than most.

I've had great luck with the Mount-It brand for a tv mount and decided to give this a try for my monitor. Installation was easy, but do be mindful of how the instructions tell you to remove the cable tracks. I didn't pay attention and partly broke one but it still works. Being user error, I'm not complaining and just letting my mistake be your education. I was also pleasantly surprised at just how high and maneuverable this stand can go. Once set and tensioned properly, I can effortlessly move my monitor however I need, including being able to lift and turn it down to use my monitor's bias lighting as a work light when working on other projects on my desk. I know this may not apply to everyone, but was a great unexpected benefit of this arm.

This mount was life changing for me! Having a mounted monitor is a must especially for competitive gamers. Being able to adjust the height and how close I want my monitor to my eyes is amazing. I can’t see myself gaming without an arm now.

Excellent monitor mount. Works perfect for my 27” LG 4K monitor. Build quality is great. Good cable management. Can tilt and adjusting height is smooth. It was on sale when I bought it. Highly recommended product.

[Employee of bestbuy] It works great , very good quality and design. Easy installation.

I have one of this and another same brand but for duo monitors. I drilling needed! Monitors will stay firm! Amazing quality, totally recommend it

Holds my monitor that’s about 15lbs. There were only 3 screws instead of 4 where the monitor mounts onto the arm though. I haven’t hope it doesn’t lead to a problem later on.

[Employee of bestbuy] It’s very nice but came with a defect on the base in the threading where the screws go into, the monitor ended up falling and breaking as well as damaging my desk. The monitor was inside the weight parameters for this mount. I followed instructions correctly.

I really recommended, as shown in the attached picture, I upgraded my gaming station and the flexibility and mobility it provides is fantastic... you can adjusted the counter load for better adjustment.:..

Pretty good monitor arm. I bought this for my wife's classroom. It holds the Viotek 32" with ease. Easy installation.

Super happy with the turnout of this. Made my setup a lot cleaner. I have so much desk space to work with now. The quality of the product is premium.

Excellent quality full motion arm. Extremely easy assembly. Good workmanship. Heavy duty.

Well built product and all motions are smooth. All in all works pretty good for my 24 inch Samsung monitor.

You can spend more on higher-quality monitor arms, but if you are looking for an arm that is still decent quality and can handle the task, this arm fits the bill. I was worried about the max weight of 20 pounds supported (my monitor comes in at 19.2 pounds), but so far have not seen any issues. I waited a month or so to write this review only because some arms start sagging after initial install. So far, have not seen any issues. Only (minor) gripe is the instructions are a little light, but there are many good YouTube videos that fill in the blanks. Cable management is also somewhat basic, but good enough to do the job. Overall, it's a pretty good arm, just not the best out there. It gets the job done, though.

I am returning the mount not because it isn't good but because I unfortunately have an oddly built glass desk and am afraid that because of the way the desk is manufactured, it will eventually shatter the glass top. Pretty easy to assemble and take apart. My only gripe is that the directions do not explain how to properly use the adjustment key. The heavier/larger the monitor, the looser you want the adjuster. Its counter intuitive but. After adding more tension my 34" ultra wide kept collapsing the arm. After loosening the tension, and hanging the monitor, the weight allowed it to stay at the height i move it to.

Been using it for a bit of time now and I have to say, Love it. This is the second monitor arm I have ever owned, and both have been Mount-it! products. Pros: -The tension on the arm is great and so far has held up nicely. -Easy to set up. -Nice cable management. -Great range of movement for my setup. Cons: -No matter how hard I tighten the base to my desk, it shifts to my right slightly. -It's a bit hard to hit that sweet spot where the monitor is more or less leveled out without it tilting slightly to one side or the other (thou to be honest, it's not as bad as it sounds, but when I notice it, I can't help but keep adjusting it till I have it the way I like it. -The material is a bit rough rather than smooth (only an issue when you dust it off, and if it get's marked it will stay marked as it's not glossy. Not a real huge con, but something to be aware of) -A bit pricy (but in all honesty could have been worse) All in all I am happy with this purchase

Got this on sale for $60 and my god best money spent! Made my setup a million times cleaner and less cluttered. Wish it came in a black or white color but it’s picky at this point. I’m holding my 27” dell 2k 144hz s2716dgr like a champ. When I got the mount the tension was all the way low so my monitor didn’t hold but took me 2 minutes to get it perfectly tensioned and is holding my monitor like a champ. It took about 15mins to set it all up! Will buy again if needed to be! Or will get the dual arm one in the future who knows. Quality level 100/100. Wire management was pretty good as well with me putting 3 wires thru it.

Ive owned for 1 Year now. I had some worries as many reviews say that either it cant hold their monitors, or the tightening is virtually impossible to loosen and adjust. This arm is heavy duty, metal the whole way around except under the arm of the base, where it can be detached to hold your wires. If you got thick wires, it kinda sucks, but even then, it holds pretty well. The wires if fiddled enough can flat out hide your wires. It comes with a way to hold the screen whether you made a hole through the desk, or if you are putting it on at the end of the table. I can say, WITH CONFIDENCE, that this will hold your monitor. This thing is S T R O N G. Barely any wiggle, and you can rotate the screen. I dont write reviews at all, but I had to search long and hard for something that wouldnt break on me like so many reviewers say and wish to spread the word to any who want a monitor arm already like i was a year ago. If you are looking for a strong and heavy duty that is less than $100, I'm telling you right now, this is it.