OSD Audio - 8" 70V/25V Commercial In-Ceiling Speaker with 5W Multi-Tap Transformer and 12" Grille (Single) - C1070V - White
Reviews coming soon
About this product
The C1070V is an 8-inch commercial in-ceiling speaker for background music and paging in restaurants, retail stores, offices, hotels, schools and other indoor spaces. It is built for 70V and 25V constant-voltage (distributed) audio systems, where one amplifier sends a fixed-voltage signal down a single wire run and every speaker connects in parallel along the way. This makes it easy to cover large floor plans with many speakers and long cable runs, with minimal signal loss and no speaker impedance calculations. A pre-wired, pre-mounted dual 70V/25V transformer lets you choose how much power each speaker draws from the line: 5W, 2.5W, 1.25W, 0.63W or 0.32W. Higher taps play louder and lower taps play softer, so you can set each area to the right level, then add up the taps on the line to size your amplifier. An 8 ohm lead also allows use with a standard amplifier. The 8-inch dual paper cone driver with a 6 oz. magnet reproduces 40Hz to 20kHz for clear voice and full music, and the 12-inch white metal grille sits flush with the ceiling for a clean look. Sold as a single speaker with a 10-year warranty. For a version with a built-in front volume control, see the C1090VK.
Features
Built for 70V and 25V Distributed Audio
Connect many speakers in parallel on a single wire run from one 70V or 25V amplifier. The constant-voltage line carries signal over long distances with minimal loss and no impedance math, ideal for restaurants, retail stores, offices, hotels and schools.
Five Power Taps Set Each Speaker's Volume
Choose 5W, 2.5W, 1.25W, 0.63W or 0.32W with the color-coded transformer leads. Each step down halves the power and lowers volume by about 3 dB, so a busy dining room can play louder while hallways and restrooms stay quiet, all on the same line.
Simple Amplifier Sizing
Add up the tap settings of every speaker on the line to choose your amplifier. For example, 20 speakers on the 5W tap total 100W, which fits a 120W 70V amplifier with headroom to spare. An 8 ohm lead also allows use with a standard amplifier.
Full-Range 8-Inch Dual-Cone Driver
An 8-inch dual paper cone driver with a 6 oz. magnet covers lows, mids and highs from 40Hz to 20kHz in a single driver, delivering clear paging announcements and full-range background music.
Pre-Wired Transformer and Flush 12-Inch Grille
The transformer comes pre-wired and mounted, and the 12-inch white metal grille is pre-attached for faster installs. It sits flush with the ceiling for a clean, low-profile look. Requires a 10.24-inch cutout. Sold as a single speaker with a 10-year warranty.
Specifications
- Speaker TypeIn-CeilingRMS Power10 watts
Reviews
This product doesn't have any reviews yet.
Compare similar products

The C1070V is an 8-inch commercial in-ceiling speaker for background music and paging in restaurants, retail stores, offices, hotels, schools and other indoor spaces. It is built for 70V and 25V constant-voltage (distributed) audio systems, where one amplifier sends a fixed-voltage signal down a single wire run and every speaker connects in parallel along the way. This makes it easy to cover large floor plans with many speakers and long cable runs, with minimal signal loss and no speaker impedance calculations. A pre-wired, pre-mounted dual 70V/25V transformer lets you choose how much power each speaker draws from the line: 5W, 2.5W, 1.25W, 0.63W or 0.32W. Higher taps play louder and lower taps play softer, so you can set each area to the right level, then add up the taps on the line to size your amplifier. An 8 ohm lead also allows use with a standard amplifier. The 8-inch dual paper cone driver with a 6 oz. magnet reproduces 40Hz to 20kHz for clear voice and full music, and the 12-inch white metal grille sits flush with the ceiling for a clean look. Sold as a single speaker with a 10-year warranty. For a version with a built-in front volume control, see the C1090VK.

The V-1020C is an 8" ceiling mountable speaker designed for indoor use, featuring a built-in amplifier and adjustable volume control. With a maximum frequency response of 15 kHz and a signal-to-noise ratio of 96 dB, it ensures exceptional audio quality for voice and music reproduction.

The MB8TSQVR is a surface-mounted metal box speaker featuring an 8-inch full-range cone, multi-tap 70V/25V transformer with multiple wattage taps, recessed front grille volume control, and a rugged all-steel enclosure suitable for ceiling or wall mounting.

The V-1010C is a ceiling-mounted speaker designed for exceptional voice and music reproduction. It features a built-in amplifier, adjustable volume control, and a durable steel construction. This speaker is perfect for various indoor applications, providing high-quality audio in a compact design.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.




































