PAC - LocPRO Advanced 2-Channel or 4-Channel Active Line Output Converter with Auto Turn-On - Black
About this product
Easily add an aftermarket amplifier to your vehicle’s factory audio system with the LocPRO Advanced 2-Channel or 4-Channel Active Line Output Converter with Auto Turn-On by PAC. The LPA-E.4 converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This two or four-channel active line output converter can also be used to retain your vehicle’s OEM amplified audio system when replacing your factory radio.
Compatible with most vehicles’ OEM audio systems
For use when adding aftermarket amplifiers to car audio systems without RCA preamp outputs or when replacing your vehicle’s factory radio and retaining the factory amplified audio system.
2-channel or 4-channel input selection
Features 4-channel in and 4-channel out unfiltered or 2-channel in and 4-channel out unfiltered for integration with your existing audio system. Set to 2-channel if only using front left and front right inputs or 4-channel if using all inputs.
Auto turn-on mode selection
Choose between remote wire input or DC offset (3V - 7V turn on trigger) to automatically power the amplifier when the radio is turned on.
Dual variable stereo gain control with independent clipping indicator
Allows you to adjust the output signal from -28dB to +1dB and indicates signal clipping for both the front and rear when gain is set to high.
Selectable on-board load resistors
Including 20 ohms, 60 ohms, and 20k ohms impedance for newer factory-amplified vehicles.
400W (40V) peak power input per channel @ 20k ohms
For high-quality sound.
9.5V (RMS) maximum output voltage @ 13.8V
For efficient operation.
Selectable ground isolation
Choose from common, ISO (default), or 200 ohms.
10Hz - 20kHz frequency response
Ensures faithful sound reproduction.
>110dBA signal-to-noise ratio @ 6.4V output
Enjoy crisp audio.
<0.01% Total Harmonic Distortion (THD)
For clean sound.
Up to 12dB bass boost (CH 3-4)
Customize your bass using the included LPA-REM remote bass level controller.
<250Hz low-pass filter (CH 3-4)
Ensures flexible operation.
18AWG removable quick-connect with screw-type terminal
Provides secure connections.
Aluminum extrusion chassis and housing
Enables increased heat dispersion and durability.
Remote mounting bracket
Allows for flexible installation options.
- BrandPACModel NumberLPA-E.4Product NameLocPRO Advanced 2-Channel or 4-Channel Active Line Output Converter with Auto Turn-OnColorBlackVehicle CompatibilityUniversalProduct CompatibilityAmplifier
Reviews
Rating 4 out of 5 stars with 1 review
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Compare similar products
Easily add an aftermarket amplifier to your vehicle’s factory audio system with the LocPRO Advanced 2-Channel or 4-Channel Active Line Output Converter with Auto Turn-On by PAC. The LPA-E.4 converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This two or four-channel active line output converter can also be used to retain your vehicle’s OEM amplified audio system when replacing your factory radio.
Easily add an aftermarket amplifier or subwoofer to your vehicle’s factory audio system with this 2-Channel Active Line Output Converter with AccuBASS and Subwoofer Control by AudioControl. The LC2i PRO converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier or subwoofer without replacing your factory radio. This two-channel line output converter also features AccuBASS technology so you can turn up the volume without losing bass.
Easily add an aftermarket amplifier to your vehicle’s factory audio system with this 6-Channel Active Line Output Converter with AccuBASS by AudioControl. The LC7i converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This six-channel line output converter also features AccuBASS technology so you can turn up the volume without losing bass.
Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level with all the sparkling highs and thunderous lows of your original audio. KISLOC2 Stereo Line-Output Converter Unlike traditional LOCs the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels. Using nothing more than your factory speaker wires the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source. Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on *Amplifier output of smart radio must have 60 impedance or lower. What's in the Box 46KISLOC2 line output converter Owner's manual Specifications Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on
| Pros for PAC - LocPRO Advanced 2-Channel or 4-Channel Active Line Output Converter with Auto Turn-On - Black | |||
|---|---|---|---|
| There were no pros for this product— | Ease of use, Installation, Sound Quality, Bass, Price | There were no pros for this product— | Ease of use, Installation, Overall Performance, Remote Turn-On, Compatibility |
| Cons for PAC - LocPRO Advanced 2-Channel or 4-Channel Active Line Output Converter with Auto Turn-On - Black | |||
| There were no cons for this product— | There were no cons for this product— | There were no cons for this product— | Price |
Specs
Can I return this item to the store if I order it of line and had it delivered to my house
Answered by AAMP GlobalYou would have to ask Best Buy about that. I can only answer product related questions.
What is the purpose of the auto turn-on feature?
The auto turn-on feature allows you to add an aftermarket amplifier to your vehicle’s factory audio system without replacing your factory radio.
This question and answer was generated by AI based on customer and product data.What is the maximum power handling capacity of the converter?
The maximum power handling capacity of the converter is 400 watts.
This question and answer was generated by AI based on customer and product data.Can this converter be used with both 2-channel and 4-channel amplifiers?
This converter can be used with both 2-channel and 4-channel amplifiers.
This question and answer was generated by AI based on customer and product data.What is the warranty coverage for the converter?
The manufacturer offers a one-year warranty on parts for this converter.
This question and answer was generated by AI based on customer and product data.
More to consider
Enjoy your ride Sponsored
Discover related products
VEVOR - GPS Navigator for Car, 9 inch Touch Screen 16GB GPS Navigation System with Built-in Dash Cam
$121.99The price was $159.99
