Powerbass - ASA3-600.1 - 600 Watt x 1 @ 2-Ohm Amplifier - Black/Gray
Powerbass - ASA3-600.1 - 600 Watt x 1 @ 2-Ohm Amplifier - Black/Gray
FREE shipping to
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariable
- Key Specs
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Number Of Channels: 1
- Bass Boost: Variable (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- General
- Brand: Powerbass
- Model Number: ASA3-600.1
- Product Name: PowerBass ASA3-600.1 - 600 Watt x 1 @ 2-Ohm Amplifier
- Color: Black/Gray
- Audio Power
- Total Power Handling RMS: 600 watts
- Total Power Handling Maximum: 1200 watts
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Audio
- Number Of Channels: 1
- Bass Boost: Variable (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- Features
- Bluetooth Enabled: false (The device is capable of communicating with another device via Bluetooth, provided they are within the required range of each other. A Bluetooth-enabled device must also be the same Bluetooth version or higher than the accessory it is intended to pair with.)
- Marine: false
- Dimensions
- Product Height: 4.700 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 11.600 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 18.300 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 11.0 pounds (The out of box weight of the item.)
- Warranty
- Warranty - Parts: 1-Year Manufacturer Warranty
- Warranty - Labor: None
- Other
- UPC: 823871006038
PowerBass ASA3-600.1 600W RMS @ 2Ω MONO BLOCK CLASS A/B AMPLIFIER PowerBass's A/B Class mono block amplifiers combine our new clean low profile design that still has all the necessary features built into an economical package that puts power and control at your command. Features like a MOSFET power supply, RCA pre-amp out, and variable LPF electronic crossover make these ideally suited to add some punch to any system. The ASA3-600.1 mono subwoofer amp is a great choice when you're looking to pound out the bass. With 600 watts, there’s plenty of juice on tap to power a pair of S or M Series single 4-ohm woofers. Features - • 600 Watt High Efficiency Class A/B Design • 2-OHM Stable Mono Block Amplifier • PWM MOSFET Power Supply • Low Level RCA Input/Low Level RCA Pass Through Output • Remote Soft Delay Turn On/Off Circuit • Variable Low Pass Electronic Crossover • Variable 12dB Bass Boost EQ • Variable Gain Control • Wired Secondary Remote Gain Control Included • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. • Switchable Logo Back Lighting Specifications - • Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz • Inputs: RCA Input/RCA Pass-Through Output • Equalization Boost/Cut: 0 - 18 dB • 4-ohm Power: 300 watts x 1 • 2-ohm Power: 600 watts x 1 • Subwoofer EQ Frequency: 45 Hz • Variable Subwoofer EQ: 0 - 18 dB • Low-Pass Crossover Freq: 40 Hz - 250 Hz • Peak Power: 1200 watts • Crossover Slope: 12 dB • Dimensions (in Inches): 16.8" x 8.3" x 2.3" • Input Sensitivity: 0.25 Volts - 6.0 Volts • S/N Ratio: >94 dB • Total Harmonic Distortion: 0.3% @ Rated Power • Output Power (14.4 V) @ 4 ohm: 300 watts x 1 • Output Power (14.4 V) @ 2 ohm: 600 watts x 1 • Channels (mono): 1 • Frequency Response: 20 Hz - 22 kHz
- Key Feature: 600 Watt High Efficiency Class A/B Design
- Key Feature: Third generation of ASA-Series amplifiers have a narrower footprint for installation versatility.
- Key Feature: Increased over-voltage protection, broader input sensitivity, new extruded chassis designed for better heat management and a sporty light up badge.
- Key Feature: Improved extruded heatsink uses more fins while still maintaining the clean lines that made ASA a classic.
- Key Feature: User-friendly features like a variable bass boost control with 18 dB of boost at 45 Hz to give you more output from your subwoofers.
Whats Included
- PowerBass ASA3-600.1 - 600 Watt x 1 @ 2-Ohm Amplifier
Compare similar products
PowerBass ASA3-600.1 600W RMS @ 2Ω MONO BLOCK CLASS A/B AMPLIFIER PowerBass's A/B Class mono block amplifiers combine our new clean low profile design that still has all the necessary features built into an economical package that puts power and control at your command. Features like a MOSFET power supply, RCA pre-amp out, and variable LPF electronic crossover make these ideally suited to add some punch to any system. The ASA3-600.1 mono subwoofer amp is a great choice when you're looking to pound out the bass. With 600 watts, there’s plenty of juice on tap to power a pair of S or M Series single 4-ohm woofers. Features - • 600 Watt High Efficiency Class A/B Design • 2-OHM Stable Mono Block Amplifier • PWM MOSFET Power Supply • Low Level RCA Input/Low Level RCA Pass Through Output • Remote Soft Delay Turn On/Off Circuit • Variable Low Pass Electronic Crossover • Variable 12dB Bass Boost EQ • Variable Gain Control • Wired Secondary Remote Gain Control Included • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. • Switchable Logo Back Lighting Specifications - • Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz • Inputs: RCA Input/RCA Pass-Through Output • Equalization Boost/Cut: 0 - 18 dB • 4-ohm Power: 300 watts x 1 • 2-ohm Power: 600 watts x 1 • Subwoofer EQ Frequency: 45 Hz • Variable Subwoofer EQ: 0 - 18 dB • Low-Pass Crossover Freq: 40 Hz - 250 Hz • Peak Power: 1200 watts • Crossover Slope: 12 dB • Dimensions (in Inches): 16.8" x 8.3" x 2.3" • Input Sensitivity: 0.25 Volts - 6.0 Volts • S/N Ratio: >94 dB • Total Harmonic Distortion: 0.3% @ Rated Power • Output Power (14.4 V) @ 4 ohm: 300 watts x 1 • Output Power (14.4 V) @ 2 ohm: 600 watts x 1 • Channels (mono): 1 • Frequency Response: 20 Hz - 22 kHz
This Crunch PX 1000.4 4 Channel Amplifier is a perfect entry level amplifier for your car audio needs. It has high quality circuit and hardware designs along with exclusive technologies to improve sound quality and minimize distortion.Crunch POWERX incorporates full Class A/B technology in stereo and 4 channel amplifiers along with Class D in the mono. Class A/B sounds better, but the PC boards require a bit more space that in other circuit topologies. With Crunch POWERX we have trimmed away some of the more esoteric features to deliver a great amplifier that sound like you would expect Crunch to sound. The POWERX line also includes Crunch technology like QTD (Quick Thermal Dispersion) Technology which puts more aluminum on the heatsink than a normal amplifier. QTD assures the amplifiers make huge power while running very cool with nearly undetectable musical distortions.
Complete your car's sound system setup with the Hifonics Brutus Gamma 4-Channel Super A/B Class Amplifier. This subwoofer amp delivers power efficiently and effectively to your subwoofers, speakers, and other output devices for crisp sound with minimal distortion and heat.Control your sound with this car audio amp. This 1,000-watt amplifier sports a 4 channel operation that lets you choose between stereo and mono bridged operation. You also can customize your sound with this car audio amp's variable electronic crossover and electronic equalizer capabilities.Made for efficient power performance, this car audio amplifier is rated @ 2 ohms - 4 channels x 250 watts; @ 4 ohms - 4 channels x 125 watts; mono bridged @4 ohms - 2 channels x 500 watts. This 4-channel amp uses Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction for powerful sound, efficient cooling, and minimal distortion.All connections are secure with this car subwoofer ampflier. This amp features nickel-plated connectors and a molded connection terminal that's angled for easy access to all power, ground, and speaker connections.Pump up the sound with the Hifonics Brutus Gamma 4-Channel Amplifier.
By the beard of Zeus! Now even mere mortals can harness divine amplification power straight from the lofty, cloud crowned heights of Mount Olympus when wielding the Hifonics Zeus ZXX 1800.1D 1800 Watt Class D Monoblock Amplifier.This high efficiency class D amp has Herculean power in a small footprint. Its PWM MOSFET power supply strikes like lightning, but without extra noise or distortion thanks to its low noise pre amplifier circuitry. The Simpatico dual coil design power supply keeps voltage constant. Meanwhile, use the included remote to crank that bass like the magnificent sound deity you are.With a frequency response of 10Hz 300Hz, variable electronic crossovers, and 1800 watts of max power, the Zeus ZXX 1800.1D will take your car audio to new mythological heights.
Specs
Reviews
This product doesn't have any reviews yet.
