Customer Ratings & Reviews

This is a terrific solution for those who are looking to hide cables and run them down a drywall cavity. I've approached cable management many different ways throughout my house in different areas. I've used on-wall cable concealers when dealing with concrete walls. When dealing with drywall, I always run the cables in wall. When dealing with a wall that only has the TV, I'll usually add an additional outlet, bridging from an existing outlet. However, if there is an entertainment unit or dresser underneath the TV, then I always use a system such as the PowerBridge. It's more conventional because you don't have to interfere with the existing wiring of your home. PowerBridge is the second cable management system that I've used, with the other being a product by DataComm. The DataComm was fine as well, but I was really impressed by the ease and functionality of the PowerBridge. It was super simple to install. I didn't have to readjust the orientation of any parts. I'd say install took less than 10 minutes. It's occupies a small footprint and still allows for plenty of low voltage cables to be fed through. I would definitely recommend.

Purchased a new home. Wife said I want the 4K TVs mounted with no cables showing. Looked into these and glad I did. A bit expensive but they look and work better than expected. Just cut your holes in a cavity, feed your line through and plug. Not a hard install whatsoever. Bought one at first to try it out. Ended up buying two more for the master bedroom and spare bedroom.

Want a clean tv setup? This will solve that issue.

When I bought my new TV, I knew I wanted to hide the cables for a clean look. This do it yourself kit was perfect and exactly what I was looking for. Easy to install with great, easy to follow instuctions...I could not be happier with the outcome. I am fairly handy but even if you are not, be confident you can install this kit.

We searched high and low for the best solution for our new wall mounted TV. This one is the most elegant looking out there; however, why is the top plate twice as wide as the bottom plate? If you’re fully loading this thing with every in-wall rated cable your TV can accept (as you should, you don’t want to have to go back in and feed more cables in after the fact), then while they easily fit through the wide TV-side plate, it’s rather difficult to get them all through the half-as-wide smaller lower plate. Other than that, a very good product. Easy enough to install if you know how to cut through dry wall and feed cables and use a level. You’ll be fine. Just make sure you know where pipes are in your house so you can plan to avoid them.

I purchased the PowerBridge because (quite frankly) I got tired of being annoyed by seeing the power cable hang from the TV to the outlet. A friend recommended this as a solution. Installation took me about 20 minutes. The only tool I needed was a fixed jab saw, screw driver, a level and a pencil. It came with a template for cutting a whole in the sheetrock which took away from measuring or guessing. After it was installed it looked very professional. I am by no means a professional carpenter.

A very functional piece of electronic equipment. I had a contractor mount my flat screen TVs. The Power Bridge was must for hiding the wires. It made the install process smoother. Fast delivery through Best Buy website.

This was exactly what I needed. Had a TV already mounted when I realized the power cord was to short to get to the outlet. Also had a ChomeCast that needed to be plugged in. So having the two outlets left one open on the wall. Very easy to install and looked great when finished. Would reccomend this product.

Since it's romex cable for the power wires, it's super rigid when in-wall. Bit of a plus I guess, as it made it easy to bend it to the angle we needed, and then shove it down and around the beam that was in the way. Bit of a minus, since it makes maneuvering or fishing it up a pain. Other than that... can definitely recommend this as the price is perfect over the other brand, has two brick-usable outlets, and the install was super fast.

very easy to install, it took me about 30mins to install this product.

Relatively straightforward and simple, especially with the provided templates for both the top and bottom boxes, and a significant improvement in appearance for wall-mounted TVs having no visible wires.

Very easy installation. The whole project took about 15 minutes or less. Looks fantastic, now my LG OLED sits perfectly on the wall with all my peripherals plugged in and no hanging cables. Friends are in awe.

Was easy to install. It is extremely difficult to thread HDMI or USB cables through afterwards, so consider running all the cables you think you will ever need during the initial install.

Bought this for my downstairs TV space with a large TV that I was planning on mounting on the wall. It was easy to install and hook up. If you can use a few basic tools you can install this. Routing the cords through the holes is not quite as easy as I hoped (had to leave the outlets out of the wall while pulling the cables through the wall. Depending on the connector that's on the end of the cords it has to be pushed through at an angle that's not possible while it's mounted in the wall. Once the cords are through it works great.

Great easy to install yourself cable management system! Works perfectly to hide your cables for wall mount install. High quality product!

I’ve been wanting this since I bought my home in November. It looks Awesome and works Great. I’m very happy with this purchase.

Very easy install, all A/V cables/wires hidden for a clean uncluttered looked.

Very easy installation and looks great. Very easy to incorporate surge protector as well.

This item is super easy to install and provides a clean appearance by hiding the wires.

Super easy to install and reasonably priced. I would recommend.