Sanoxy - Gold TOSLink Fiber Optical Optic Digital Audio Cable SPDIF Sound Bar Cord (1.5 ft) - Black

IVANKY Optical Audio Cable 10ft/3M, Long Digital Audio Optical Cable for Soundbar, S/PDIF Toslink Fiber Optic Cord [Braided, Gold-Plated Connectors, CL3 Rated] for TV, Home Cinema, Xbox/PS4, Sonos

The Sanoxy 1m LC/SC Duplex 9/125 Single Mode Fiber Optic Cable is a 1 m single-mode fiber optic patch cable built for high-bandwidth, low-latency links between switches, servers, media converters, and patch panels. It uses graded-index optical fiber with a 9/125 micron core and cladding construction, which helps keep signal loss low across the run and supports the data rates commonly used in structured cabling and data-center environments. The ceramic-ferrule connectors are precision polished and protected by dust caps, while the duplex zipcord jacket stays flexible enough to route through trays, conduit, and rack channels without stressing the fiber. It is compatible with standard fiber transceivers, SFP and SFP+ modules, media converters, fiber patch panels, fiber network cards, and switch uplink ports that use the same connector type and fiber grade. Because fiber carries an optical rather than electrical signal, it suits long runs, building-to-building links, and installations where electrical isolation and interference immunity matter. Please review your device's port type and required length before ordering to confirm the correct fit for your setup.

The Sanoxy 1m SC/ST Duplex 50/125 Multimode OM2 Fiber Optic Cable is a 1 m multimode fiber optic patch cable built for high-bandwidth, low-latency links between switches, servers, media converters, and patch panels. It uses OM2-grade fiber with a 50/125 micron core and cladding construction, which helps keep signal loss low across the run and supports the data rates commonly used in structured cabling and data-center environments. The ceramic-ferrule connectors are precision polished and protected by dust caps, while the duplex zipcord jacket stays flexible enough to route through trays, conduit, and rack channels without stressing the fiber. It is compatible with standard fiber transceivers, SFP and SFP+ modules, media converters, fiber patch panels, fiber network cards, and switch uplink ports that use the same connector type and fiber grade. Because fiber carries an optical rather than electrical signal, it suits long runs, building-to-building links, and installations where electrical isolation and interference immunity matter. Please review your device's port type and required length before ordering to confirm the correct fit for your setup.