SMALLRIG ADAPTER PLATE KIT FOR NP-F TYP
Reviews coming soon
About this product
SmallRig Adapter Plate Kit for NP-F Type Batteries for 15mm LWS Rods (Supports UPS) 5537 is designed to provide continuous power for mirrorless cameras, monitors, and other equipment using NP-F series batteries. This plate can be mounted using a V-mount plate, 15mm dual rod clamp, or the bottom 1/4"-20 threaded hole and accommodates one or two NP-F batteries to power your gear. When two batteries are installed, the hot-swap feature allows you to replace one battery without shutting down connected devices, ensuring an uninterrupted power supply (UPS).Equipped with multiple output ports-D-Tap, DC (5521), and USB-C-this adapter plate allows you to power several devices simultaneously. The ports are strategically placed to avoid interference with camera operation and the use of top handles. The USB-C port supports up to 36W of input, enabling the plate to function as a charging dock.An integrated intelligent management chip optimizes both discharging and charging: during discharging, it drains the battery with the lower charge first, switching to parallel output when the voltage is low to enable hot-swaps and power high-demand devices. For charging, it prioritizes the higher-charge battery and then switches to simultaneous charging to enhance efficiency.An independent power switch allows you to check the power status and activate with a single press, while a long press (2s) disables output for all connected devices. This simplifies operation and conserves power by eliminating the need to unplug cables after a shoot. Independent LED indicators for each channel provide clear, at-a-glance battery status updates.Power Switch Single Press: Displays battery level & enables output Long Press (2s): Disables outputPower Indicator (Red) Lights up when powered on; turns off after - 10 seconds if no load is detected Solid Red: Normal operation Rapid Blinking: Abnormal state (e.g., over-current, over-voltage)Battery Status IndicatorLights up when powered on; turns off after - 10 seconds if no load is detected. Remains on if a load is connectedDuring Discharge: Solid Green: Battery level >=20% Solid Red: Battery level 10%-20% Slow Blinking Red: Battery level < 10%During Charge: Slow Blinking Green: Charging in progress Solid Green: Charging completeWorkflow Non-StopYour NP-F hub for non-stop shootingThe Ultimate Compact Power System Reliable Power Delivery Versatile Power Ports 2-Bay Fast Charging Smart Power Management Independent Power Control Power Status Indicators 3 Mounting OptionsYour No-Downtime Hub2-bay design ensures a continuous power stream by automatically switching batteries upon depletionA Complete Power SolutionStrategically placed D-Tap, DC & USB-C ports ensure clutter-free operation and simultaneous multi-device poweringPower Two at Full Speed36W dual-channel fast charging to stay in your flow Fully charge 2 NP-F550 batteries in only 2.
Features
UNINTERRUPTED POWER
Hot-swap UPS functionality ensures continuous operation for your devices, preventing power loss during critical moments with seamless battery transitions.
VERSATILE COMPATIBILITY
Designed for NP-F series batteries (NP-F550/570/750/770/950/970 etc.), offering broad compatibility for various professional setups and accessories.
ROBUST CONSTRUCTION
Crafted from durable PC, Aluminum Alloy, and Stainless Steel, guaranteeing longevity and reliable performance in demanding production environments.
MULTIPLE OUTPUT OPTIONS
Features D-Tap (14.8V=2A Max), DC (5.2-8.4V=3A Max), and USB-C (PD3.0, QC2.0/3.0) for powering a wide array of photographic and video equipment.
EFFICIENT POWER MANAGEMENT
Supports a recommended battery capacity range of 3400-10200mAh / 7.4V, optimizing power delivery and extending operational times.
Specifications
- Brand CompatibilityUniversalModel CompatibilityNP-F Series Batteries: NP-F550 / 570 / 750 / 770 / 950 / 970 etc, Accessories with a V-mount interface or 1/4"-20 screw, or 15mm dual rods with 60mm on-center spacing
Reviews
This product doesn't have any reviews yet.
Compare similar products

SmallRig Adapter Plate Kit for NP-F Type Batteries for 15mm LWS Rods (Supports UPS) 5537 is designed to provide continuous power for mirrorless cameras, monitors, and other equipment using NP-F series batteries. This plate can be mounted using a V-mount plate, 15mm dual rod clamp, or the bottom 1/4"-20 threaded hole and accommodates one or two NP-F batteries to power your gear. When two batteries are installed, the hot-swap feature allows you to replace one battery without shutting down connected devices, ensuring an uninterrupted power supply (UPS).Equipped with multiple output ports-D-Tap, DC (5521), and USB-C-this adapter plate allows you to power several devices simultaneously. The ports are strategically placed to avoid interference with camera operation and the use of top handles. The USB-C port supports up to 36W of input, enabling the plate to function as a charging dock.An integrated intelligent management chip optimizes both discharging and charging: during discharging, it drains the battery with the lower charge first, switching to parallel output when the voltage is low to enable hot-swaps and power high-demand devices. For charging, it prioritizes the higher-charge battery and then switches to simultaneous charging to enhance efficiency.An independent power switch allows you to check the power status and activate with a single press, while a long press (2s) disables output for all connected devices. This simplifies operation and conserves power by eliminating the need to unplug cables after a shoot. Independent LED indicators for each channel provide clear, at-a-glance battery status updates.Power Switch Single Press: Displays battery level & enables output Long Press (2s): Disables outputPower Indicator (Red) Lights up when powered on; turns off after - 10 seconds if no load is detected Solid Red: Normal operation Rapid Blinking: Abnormal state (e.g., over-current, over-voltage)Battery Status IndicatorLights up when powered on; turns off after - 10 seconds if no load is detected. Remains on if a load is connectedDuring Discharge: Solid Green: Battery level >=20% Solid Red: Battery level 10%-20% Slow Blinking Red: Battery level < 10%During Charge: Slow Blinking Green: Charging in progress Solid Green: Charging completeWorkflow Non-StopYour NP-F hub for non-stop shootingThe Ultimate Compact Power System Reliable Power Delivery Versatile Power Ports 2-Bay Fast Charging Smart Power Management Independent Power Control Power Status Indicators 3 Mounting OptionsYour No-Downtime Hub2-bay design ensures a continuous power stream by automatically switching batteries upon depletionA Complete Power SolutionStrategically placed D-Tap, DC & USB-C ports ensure clutter-free operation and simultaneous multi-device poweringPower Two at Full Speed36W dual-channel fast charging to stay in your flow Fully charge 2 NP-F550 batteries in only 2.

Experience true wireless freedom with the Energizer 3-in-1 Magnetic Foldable Wireless Charging Stand. Built with a premium zinc alloy frame, this charger securely powers your phone, earbuds, and Apple Watch simultaneously. Featuring strong magnetic alignment and fast wireless charging up to 15W, it keeps your devices in place and powered up—whether at home, the office, or on the go. Its foldable design and universal Qi compatibility make it a travel-friendly solution for all your wireless charging needs. AC WALL ADAPTER NOT INCLUDED. 30W POWER DELIVERY ADAPTER REQUIRED FOR MAXIMUM SPEED.

Simplify your charging routine with the Energizer 3-in-1 Wireless Charging Stand. This compact stand powers your phone, earbuds, and Apple Watch at the same time—no messy cables required. With up to 15W fast wireless charging, a stable anti-slip base, and wide compatibility with Qi-enabled devices, it's the perfect all-in-one power solution for home, office, or travel. Features a convenient charging LED indicator and an easy tap to power on and off, simply tap "Energizer" to power on or off at any time. AC WALL ADAPTER NOT INCLUDED. 30W POWER DELIVERY ADAPTER REQUIRED FOR MAXIMUM SPEED.

The Best Buy essentials 10W Magnetic Wireless Charger for iPhone or Devices Compatible with MagSafe & Qi Charging is an effortless way to power your devices. Its magnetic array attaches to your iPhone for an efficient, 7.5W charge, or place your Qi-compatible device on the charger for up to 10W of power. The built-in USB-C cable plugs into wall adapters, vehicle chargers, and more for versatile charging options. And it’s backed by Best Buy, so you can trust us to keep your phone powered.
| Pros for SMALLRIG ADAPTER PLATE KIT FOR NP-F TYP | |||
|---|---|---|---|
| There were no pros for this product— | Charging Speed, Overall Performance, Design, Magnetic Strength, Portability | Charging Speed, Overall Performance, Ease of Use, Design, Size | Charging Speed, Overall Performance, Ease of Use, Magnetic Strength, Compatibility |
| Cons for SMALLRIG ADAPTER PLATE KIT FOR NP-F TYP | |||
| There were no cons for this product— | Compatibility, Weight, LED Brightness | Compatibility, Heat Dissipation, Light Brightness, RGB Light | Heat Dissipation, Connectivity |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.






































