Smallrig - Full Camera Cage for Sony FX30/FX3, Black

Neewer Cage Camera Cage with HDMI Cable Clamp, NATO Rail, 3/8 Inch ARRI Positioning Holes, 1/4 Inch Thread Compatible with Sony FX3 FX30 Original XLR Handle

SmallRig "HawkLock" Cage for Sony FX5 6776 is designed to protect camera and provide accessory mounting points. The modular cage consists of a NATO rail and a U-shaped cage. The NATO rail is secured on the top via two 1/4"-20 screws and removed to allow installing the original XLR top handle; the U-shaped cage is fixed via 1/4"-20 screws on both sides and at the bottom to prevent twisting, with a cushion against scratches. At the battery door there is a hinge arm that fits camera curve for improved grip experience for little finger. A dedicated HDMI cable clamp protects interfaces to ensure stable signal transmission. The patented self-developed quick release structure (named HawkLock) covers the NATO rail and Arca-Swiss plate, and is used in conjunction with HawkLock eco-accessories, such as the Top Handle 4483, the Side Handle 4485, the Arca-Swiss Clamp 4486, etc., to achieve smooth sliding in and self-locking to improve the efficiency of disassembling and reassembling; and at the same time, it is compatible with the traditional cold shoe, NATO Clamp, and the Arca-Swiss Clamp eco-accessories. In addition, the cage is built-in 1/4 --20 threaded holes, ARRI 3/8"-16 Locating Hole, 1/4"-20 locating holes, QD socket, strap slot, and can be expanded with accessories such as Magic Arm 3873, Top Handle 2165C, Rod Clamp 3598, QD Shoulder Strap, Hand Strap 3848, and Shoulder Strap PSC2428 for professional creation. A magnetic wrench is also included for easy assembly and disassembly.Notes: When using the top plate, confirmed compatible hot shoe accessories include the Sony ECM-B1M, ECM-M1, ECM-B10, and the DJI Mic 2 hot shoe adapter. Confirmed incompatible hot shoe accessories include the Sony ECM-W3, ECM-W3S, and ECM-W2BT microphones When using the Sony XLR handle (XLRH2B) or Sony EVF (DVFEL1B), the top plate must be removed firstLocked for ImpactMulti-point locking design secures the camera.Low Angles Without the DragErgonomic grip built for low angles.No Slip, No DriftAnti-slip design of NATO rail and Arca-Swiss plate locks tight for any action.Modular Spine of Cinematic Rig40% lighter than standard dual rod systems. Built-in Arca-Swiss base for instant tripod mounting Fits follow focuses, matte boxes, batteries, and more.

SmallRig Cage for Sony Alpha 1 II / Alpha 9 III 5642 is specifically engineered for wildlife photographers. The cage boasts a three-point locking system, using a bottom 1/4"-20 screw and dual side screws to secure the camera and prevent deflection, while built-in pads protect it from scratches. The integrated teleconverter support is compatible with Sony FE 1.4x and 2.0x models, reducing lens mount strain for more stable shots at long focal lengths.Equipped with multiple mounting interfaces-including 1/4"-20 threaded holes, 1/4"-20 locating holes, 3/8"-16 threaded holes, and ARRI 3/8"-16 locating holes-this cage accommodates a variety of accessories. These include side handles (ID 4015), top handles (ID 3765) for smooth camera movements, monitor mounts (ID 2903B), tripods (ID 3989), power bank holders (ID BUB2336), and mini V-mount battery plates (ID 2987). The side also features a 1/4"-20 locating hole for mounting single rod clamps (ID 3598), magic arms (ID 3873), and side handles (ID 4346).On the left side, the cage integrates a "HawkLock" quick release NATO rail for quick attachment and detachment of side handles (ID 4485, 5633). Additional mounting points include a cold shoe mount for microphones and lights, a strap slot for wrist straps (ID 3848), and a QD socket for shoulder straps (ID 4118B).The bottom of the cage features an Arca-Swiss quick release plate for direct mounting to Arca-type tripods (ID 4060) and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro gimbals, enabling rapid transitions between stabilizer, handheld, and tripod setups.Additionally, the cage is finished with a premium wear-resistant coating, ensuring it maintains a professional aesthetic even after rugged field use. A built-in double head wrench at the bottom facilitates easy assembly and disassembly.Note: Remove the teleconverter support before installing the stabilizer.