Smallrig - Hot-Swap UPS Adapter Plate with 15mm Dual Rod Clamp for NP-F Type Batteries
Reviews coming soon
About this product
SmallRig Adapter Plate Kit for NP-F Type Batteries for 15mm LWS Rods (Supports UPS) 5537 is designed to provide continuous power for mirrorless cameras, monitors, and other equipment using NP-F series batteries. This plate can be mounted using a V-mount plate, 15mm dual rod clamp, or the bottom 1/4"-20 threaded hole and accommodates one or two NP-F batteries to power your gear. When two batteries are installed, the hot-swap feature allows you to replace one battery without shutting down connected devices, ensuring an uninterrupted power supply (UPS).Equipped with multiple output ports-D-Tap, DC (5521), and USB-C-this adapter plate allows you to power several devices simultaneously. The ports are strategically placed to avoid interference with camera operation and the use of top handles. The USB-C port supports up to 36W of input, enabling the plate to function as a charging dock.An integrated intelligent management chip optimizes both discharging and charging: during discharging, it drains the battery with the lower charge first, switching to parallel output when the voltage is low to enable hot-swaps and power high-demand devices. For charging, it prioritizes the higher-charge battery and then switches to simultaneous charging to enhance efficiency.An independent power switch allows you to check the power status and activate with a single press, while a long press (2s) disables output for all connected devices. This simplifies operation and conserves power by eliminating the need to unplug cables after a shoot. Independent LED indicators for each channel provide clear, at-a-glance battery status updates.Power Switch Single Press: Displays battery level & enables output Long Press (2s): Disables outputPower Indicator (Red) Lights up when powered on; turns off after - 10 seconds if no load is detected Solid Red: Normal operation Rapid Blinking: Abnormal state (e.g., over-current, over-voltage)Battery Status IndicatorLights up when powered on; turns off after - 10 seconds if no load is detected. Remains on if a load is connectedDuring Discharge: Solid Green: Battery level >=20% Solid Red: Battery level 10%-20% Slow Blinking Red: Battery level < 10%During Charge: Slow Blinking Green: Charging in progress Solid Green: Charging completeWorkflow Non-StopYour NP-F hub for non-stop shootingThe Ultimate Compact Power System Reliable Power Delivery Versatile Power Ports 2-Bay Fast Charging Smart Power Management Independent Power Control Power Status Indicators 3 Mounting OptionsYour No-Downtime Hub2-bay design ensures a continuous power stream by automatically switching batteries upon depletionA Complete Power SolutionStrategically placed D-Tap, DC & USB-C ports ensure clutter-free operation and simultaneous multi-device poweringPower Two at Full Speed36W dual-channel fast charging to stay in your flow Fully charge 2 NP-F550 batteries in only 2.
Features
UNINTERRUPTED POWER
Hot-swap UPS functionality ensures continuous operation for your devices, preventing power loss during critical moments with seamless battery transitions.
VERSATILE COMPATIBILITY
Designed for NP-F series batteries (NP-F550/570/750/770/950/970 etc.), offering broad compatibility for various professional setups and accessories.
ROBUST CONSTRUCTION
Crafted from durable PC, Aluminum Alloy, and Stainless Steel, guaranteeing longevity and reliable performance in demanding production environments.
MULTIPLE OUTPUT OPTIONS
Features D-Tap (14.8V=2A Max), DC (5.2-8.4V=3A Max), and USB-C (PD3.0, QC2.0/3.0) for powering a wide array of photographic and video equipment.
EFFICIENT POWER MANAGEMENT
Supports a recommended battery capacity range of 3400-10200mAh / 7.4V, optimizing power delivery and extending operational times.
Specifications
- BrandSmallrigModel Number5537Product NameSmallRig Hot-Swap UPS Adapter Plate with 15mm Dual Rod Clamp for NP-F Type BatteriesProduct Height1.77 inchesProduct Width5.23 inchesProduct Length6.90 inches
Reviews
This product doesn't have any reviews yet.
Compare similar products

SmallRig Adapter Plate Kit for NP-F Type Batteries for 15mm LWS Rods (Supports UPS) 5537 is designed to provide continuous power for mirrorless cameras, monitors, and other equipment using NP-F series batteries. This plate can be mounted using a V-mount plate, 15mm dual rod clamp, or the bottom 1/4"-20 threaded hole and accommodates one or two NP-F batteries to power your gear. When two batteries are installed, the hot-swap feature allows you to replace one battery without shutting down connected devices, ensuring an uninterrupted power supply (UPS).Equipped with multiple output ports-D-Tap, DC (5521), and USB-C-this adapter plate allows you to power several devices simultaneously. The ports are strategically placed to avoid interference with camera operation and the use of top handles. The USB-C port supports up to 36W of input, enabling the plate to function as a charging dock.An integrated intelligent management chip optimizes both discharging and charging: during discharging, it drains the battery with the lower charge first, switching to parallel output when the voltage is low to enable hot-swaps and power high-demand devices. For charging, it prioritizes the higher-charge battery and then switches to simultaneous charging to enhance efficiency.An independent power switch allows you to check the power status and activate with a single press, while a long press (2s) disables output for all connected devices. This simplifies operation and conserves power by eliminating the need to unplug cables after a shoot. Independent LED indicators for each channel provide clear, at-a-glance battery status updates.Power Switch Single Press: Displays battery level & enables output Long Press (2s): Disables outputPower Indicator (Red) Lights up when powered on; turns off after - 10 seconds if no load is detected Solid Red: Normal operation Rapid Blinking: Abnormal state (e.g., over-current, over-voltage)Battery Status IndicatorLights up when powered on; turns off after - 10 seconds if no load is detected. Remains on if a load is connectedDuring Discharge: Solid Green: Battery level >=20% Solid Red: Battery level 10%-20% Slow Blinking Red: Battery level < 10%During Charge: Slow Blinking Green: Charging in progress Solid Green: Charging completeWorkflow Non-StopYour NP-F hub for non-stop shootingThe Ultimate Compact Power System Reliable Power Delivery Versatile Power Ports 2-Bay Fast Charging Smart Power Management Independent Power Control Power Status Indicators 3 Mounting OptionsYour No-Downtime Hub2-bay design ensures a continuous power stream by automatically switching batteries upon depletionA Complete Power SolutionStrategically placed D-Tap, DC & USB-C ports ensure clutter-free operation and simultaneous multi-device poweringPower Two at Full Speed36W dual-channel fast charging to stay in your flow Fully charge 2 NP-F550 batteries in only 2.

The TetherBLOCK QR Plus Arca-Type Quick Release Plate (Dark Grey) can be mounted to Arca-type quick release clamps; accepts cameras with 1/4"-20 tripod socket. Topside grooves accommodate USB or FireWire data cables.

Neewer V Mount Battery Plate with Dual 15mm Rod Clamps, 1/4" & 3/8" Threads, Metal V Lock Battery Mounting Plate Fits Camera Rig Cage with 15mm Rail Rod Support System, Compatible with SmallRig (ST43)

Let the SHAPE Pro Video Adapter Plate transform your tripod experience with its precision-engineered quick-release functionality, tailored specifically for compatibility with the ST15 & ST15MD tripods. Crafted from high-grade CNC aluminum, this durable and sturdy adapter plate ensures a reliable connection to your tripod, providing a stable and secure platform for all your photography and videography needs.The adapter plate's design incorporates four non-slip rubber pads, enhancing its grip and protecting your equipment from scratches. Its lightweight and compact form factor makes it an unobtrusive addition to your gear, allowing for effortless transportation and setup.Experience the convenience of the quick-release mechanism, which is activated by a simple turn of the knob located at the rear of the tripod head. This versatile feature enables swift and easy attachment or detachment of your camera, streamlining your workflow and saving valuable time on set or in the field.Included with the adapter plate are both 1/4-20 and 3/8-16 tie-down screws, offering compatibility with a wide range of camera models and accessories. Whether you're a professional photographer or a passionate videographer, the SHAPE Pro Video Adapter Plate is an essential tool that enhances the functionality of your ST15 or ST15MD tripod, making it a smart choice for creators who value efficiency and stability in their equipment setup.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.














































