StarTech.com - PXT515C19146 6 ft. Computer power cord - NEMA 5-15P to C19, 14 AWG

Need to power a UPS, rack PDU, or server with a C20 inlet from a standard wall outlet? This Cable Leader power cord pairs a NEMA 5-15P 3-prong grounded wall plug with an IEC 60320 C19 connector, delivering wall-outlet power directly to higher-power equipment without a PDU-to-device jumper. It is built from 14 AWG, 3-conductor copper wire with a flame-retardant VW-1 SJT jacket and fully molded ends, rated 15A at 125V for indoor use, and the cordset is UL Listed. The C19 connector fits the C20 inlets commonly found on rack PDUs, larger UPS units, servers, and core switches; it is larger than the common C13 and will not fit C14 inlets, and the 5-15P plug limits the cordset to 15A even though some C19 hardware exists in 20A versions. Best for: powering a C20-inlet UPS, PDU, or server from a standard North American wall outlet within 15A/125V. Not for: C13/C14 devices, 20A applications, 250V circuits, or outdoor use.

Need to run a server, UPS, or rack PDU with an IEC C20 inlet from a 208V or 240V circuit with a NEMA 6-20 outlet? This Cable Leader NEMA 6-20P to IEC C19 power cord plugs into a 20 amp 6-20R receptacle and carries the full 20A 250V rating end to end, because the 6-20P plug, the 12 AWG conductors, and the C19 connector are all rated for 20 amps. Built with 12 gauge three-conductor cable in a black SJT jacket, with fully molded plugs and strain relief at both ends. Compatible with any device using an IEC C20 inlet on a 208V, 220V, or 240V supply, including servers, UPS units, rack PDUs with C20 input, high-power network switches, and ASIC miners; for loads that run around the clock, keep continuous draw at 16A or less. UL Listed and RoHS compliant. Best for: 208V/240V data center, server rack, and equipment power from a NEMA 6-20R outlet. Not for: 120V household outlets, NEMA 6-15R outlets, twist-lock L6-20 receptacles, or devices with a C14 inlet.

NEMA 5-15P male to IEC320 C19 female power cord can be used in a server room to provide a reliable power connection for server applications. The female C19 end mates with a C20 inlet, and the 5-15P male end plugs into a standard North American outlet.