StarTech.com - StarTech 3m RS232 Crossover Serial Cable w/Al-Mylar Shielding F/M Black

The Cat6 Patch Cable N6PATCH5YL is a 5-foot Ethernet cable designed for high-performance network connections. It supports data transfer rates up to 10 Gbps and is suitable for Power over Ethernet (PoE) applications, delivering up to 100W for devices like VoIP phones and security systems. The cable features 24 AWG stranded copper conductors, 50-micron gold-plated connectors to prevent rust and corrosion, and a high-quality PVC jacket that resists bending and fraying. Snagless connectors and molded boots facilitate easy installation and protect RJ45 clips during setup. The cable is ETL verified and UL certified, meeting ANSI/TIA-568-2.D Category 6 standards for quality assurance.

StarTech.com N6LPATCH10GR 10ft (3m) CAT6 Ethernet Cable - LSZH (Low Smoke Zero Halogen) - 10 Gigabit 650MHz 100W PoE RJ45 UTP Network Patch Cord Snagless w/Strain Relief - Gray CAT 6, ETL Verified (N6LPATCH10GR)

Need a OM4 optical fiber cable from a LC port to a ST port? This Cable Leader OM4 LC to ST fiber optic patch cable, also sold as a LC to ST multimode fiber optic cable, fiber optic network cable or patch cord, uses Corning 50/125 OM4 glass in a 2.0 mm OFNR riser-rated zipcord with a duplex LC/UPC connector on one end and two ST/UPC bayonet connectors with zinc hoods on the other, insertion loss 0.30 dB or less and return loss 35 dB or better. OM4 fiber is specified by TIA-492AAAD at 4700 MHz-km effective modal bandwidth, which carries 10GBASE-SR up to 400 m and 25GBASE-SR up to 100 m under IEEE 802.3. Works with 10GBASE-SR and 1000BASE-SX multimode optics and equipment from Cisco, Ubiquiti UniFi, MikroTik, TP-Link, Netgear, TRENDnet, StarTech, Dell and HPE Aruba. Each cable is sample-tested during production, and Cable Leader handles replacement requests directly. Best for: 10G links between LC and ST gear, patch panels, media converters. Not for: LR or LX single-mode optics on yellow OS2 cable, green APC ports, or Toslink audio.