Tilta - Basic Kit for Panasonic S5 II and S5 IIX, Black

SmallRig Cage Kit for Panasonic LUMIX S1 II / S1 IIE / S1R II 4903 is designed to assist with handheld shooting and attach accessories. It includes a cage, an HDMI & USB-C cable clamp and a top handle, in which, the top handle, ergonomically designed to enhance grip, connects to the cage via NATO clamp and the thumbscrew-tightened cable clamp can fix HDMI & USB-C cables at the same time. Among the accessory mounting points, 1/4"-20 threaded holes support Side Handle 3323; cold shoe mounts suit SSD Holder BSH2343, microphone, LED video light, monitor, etc; and ARRI 3/8"-16 locating holes fit Monitor Mount 2903B. It also comes with a HawkLock H21 NATO rail on the left for Side Handle 4485 and strap holes on both sides, which are compatible with the hand strap. Besides, a magnetic wrench is included for easy disassembly and assembly.Excellence in Diverse Environments Brand-Endorsed Protection & Expansion Broad CompatibilityDedicated Brand-Endorsed DesignSnug, protective, and versatile: LUMIX-Approved.Three-Point Locking System for Extra StabilityEmpowering Your Vision Across SettingsIntegrated Arca-Swiss quick release plate for seamless switching between DJI RS series stabilizers. 1/4"-20 Threaded Hole 1/4"-20 Locating Hole 3/8"-16 Threaded Hole ARRI 3/8"-16 Locating Hole QD Socket Cold Shoe Mount NATO Rail Lanyard Hole Arca-Swiss Quick Release Plate Lightweight Top Handle Comfortable grip for low-angle shooting and additional expansion options. Upgraded HDMI & USB-C Cable Clamp For stable data transmission. Comprehensive Protection Compact solution for comprehensive protection. Note: Please remove the side lock adapters before installing this cage The cage in the kit is compatible with LUMIX S5 II / S5 IIX / G9 II cameras, but the HDMI & USB-C Cable Clamp is only compatible with LUMIX S1 II / S1 IIE / S1R II The cage is compatible with Panasonic DMW-XLR1 / XLR2, but the top handle in the kit is not. If you need to use Panasonic DMW-XLR1 / XLR2, we recommend you to use (SmallRig Top Handle for Sony XLR-K1M / K2M / K3M and Panasonic DMW-XLR1 / XLR2 3082).

Introducing the Camera Cage for Canon C50 Base KitThe foundation of this kit is the full camera cage which is designed to provide additional protection for the Canon C50 Camera Body and allows users to build off of to support many video focused accessories.Three points of contact create a secure connection and help maintain cage stability during high intensity and dynamic shooting environments while its modular design allows users to easily break the unit down into a half cage for smaller and lighter setups.It features an adjustable height of 40mm and features a textured grip via non-slip silicone, ensuring improved comfort when shooting handheld for any amount of time. This handle also provides more mounting options via its Cold Shoe Receiver and a 1/4"-20 thread with locating points.Modular Design Flexible Full / Half Cage: Versatile expansion Detachable Top Plate: Clearance for the original XLR audio handleSecure InstallationThree-point locking mechanism provides secure installation and maintains stability during high-intensity or dynamic shooting.Multiple Configurations with Easy Expansion ARCA Base for Quick Transitions Horizontal & Vertical Shooting Support - Features 3/8"-16 and 1/4"-20 threads on the side for secure vertical shooting Comprehensive Mounting PointsAccessoriesExpandableXLR audio expansion module for attaching lights, monitors, and other accessories.Stable Lens Adapter MountingPL-RF Mount Fastener Used to secure the PL-RF lens adapter.Note: Compatible with C50/C80/C400 cameras.Secured Cable ClampHand-tightened cable clamp for securing HDMI and USB-C cables to ensure reliable data transmission.V Mount Battery AdapterThe Baseplate-Free design enables a more lightweight power solution.- Full Camera Cage -Introducing the Full Camera Cage for Canon C50The camera cage is designed to provide additional protection for the Canon C50 Camera Body and serves as a foundation to build from to support many video focused accessories. Three points of contact create a secure connection and help maintain cage stability during high intensity and dynamic shooting environments.Its modular design allows users to easily break the unit down into a half cage for smaller and lighter setups. Arca Bottom Plate accommodates multiple configurations and fast transitions between support systems such as Tripods and Gimbals. 3/8"-16 and 1/4"-20 threads on the side arms make it easy to shoot vertically while locating points help keep accessories from twisting even with a single 1/4"-20.Separate Cable Clamps for USB-C and HDMI can be tightened by hand and greatly improve cable security. The detachable Top Plate supports the original XLR Top Handle, while the optional Top Handle Extension adds a Cold Shoe Receiver and NATO Rail. The optional PL-RF Mount Fastener can be used to secure a PL-RF Lens Mount Adapter and is also compatible with the C400 and C80.Features Custom Designed for the Canon C50 Camera Body Mount Accessories via 3/8"-16 and 1/4"-20 Threads with Locating Points Detachable Top Plate Supports the Original XLR Top Handle Vertical Ready Design via Mounting Points on Each Side Arm Cable Clamps Utilize Thumb Screws for Improved Cable Security- XLR Extension Bracket -Introducing the XLR Extension Bracket for Canon C50This mechanical accessory mounts onto the original XLR Top Handle for the Canon C50. It provides additional mounting points for accessories such as an integrated NATO Rail and a Cold Shoe Receiver. This allows users to utilize the full functionality of the XLR Top Handle, while still having the option to mount various accessories to it.Features Custom Designed for the Canon C50 XLR Top Handle Mount Accessories Such as External Monitors, Microphones, or LED Lights Mounting Points Include an Integrated NATO Rail and a Cold Shoe Receiver Secure Connection via Two Points of Contact Lightweight & Durable Aluminum and Stainless Steel Construction- Xeno 1/4"-20 with Locating Pins Side Handle -Introducing the Tilta Xeno Side Handle, a new side handle inspired by the sleek and bio-mechanical design of the Xenomorph. This side handle seamlessly blends strong aesthetics with ergonomic functionality, providing a comfortable and secure grip for users to operate their camera rig from.This version includes a connection type with a 1/4"-20 thumbscrew with locating pins in order to mount the handle to a camera cage. This creates an incredibly secure connection while limiting rotation.

SmallRig "Black Mamba" Cage for Panasonic S1R II / S1 II / S1 IIE 5502 is meticulously crafted to provide comprehensive protection and a multitude of expansion interfaces for your camera. The cage features a secure locking mechanism with a bottom 1/4"-20 screw and two side locating blocks, along with integrated silicone pads to prevent scratches on your camera. Maintaining the iconic "Black Mamba" style, this cage allows full access to all camera buttons and interfaces for seamless control. The cage is equipped with multiple 1/4"-20 threaded holes and ARRI 3/8"-16 locating holes for attaching accessories such as side handles (ID 2093B), "Black Mamba" top handles (ID 3786), and monitor mounts (ID 2903B). The left-side NATO rail enables the attachment of rotating side handles (ID 3260), while the top cold shoe mount accommodates microphones and lights. A QD socket at the base allows for quick attachment of a shoulder strap, and the built-in Arca-Swiss baseplate facilitates direct mounting to Arca-type tripods and DJI RS stabilizers (RS 2 / RSC 2 / RS 3 Pro / RS 3 / RS 4 Pro / RS 4 / RS 4 Mini). Additional threaded holes provide compatibility with quick release plates for DJI RS 2 / RSC 2 and Arca-Swiss quick release plates (ID 3154). Both the sides and bottom feature strap slots for attaching wrist straps (ID 3848), shoulder straps (ID PSC2428), and other accessories. Furthermore, the cage includes a magnetic dual-head wrench at the bottom for easy assembly and disassembly.Note: Before installing the cage, remove the locating blocks on both sides using the bottom wrench The cage is compatible with the Panasonic DMW-XLR1.