Installation is rather easy. However, I have to bundle up the cables as preparation to speed up the installation. I used to use 2 switches to hook up these wired devices, but now it's one for all.

Rack mounted to a 2U frame, fit perfect with all the included mounting brackets and screws. Just plug and play... needed a larger switch to collect ethernet at a centralized room in my house.... and just worked perfectly. Compatible with my eero mesh system, make all eeros home runs to gateway, bypassing the wireless backhaul... now all 3 eeros provide full speed back to the gateway thru this switch from all areas of the house.

This was an easy plug and play replacement for a 14yo 10/100 24 port switch. I think the old switch was 'dying' from age and power surges/outages. I replaced the old switch and was back up running in 30 minutes. Don't need the speed since the majority of connected devices are 100MBps, but the connectivity is reliable again.

I consolidated several 8 port switches to this single 24 port switch. All my equipment working flawlessly and has significantly reduced the clutter. Have about 16 devices plugged into it downstream of my broadband router and no issues to report. Only comment would have been to have screw mount holes at the bottom of the unit as I wanted to mount it on a wall. However, I used the flanges sticking out both ends to secure it, which needs some extra space around the router to screw it into the wall. But not a big issue.

It's an ethernet switch, not sure what else to say. You plug wires in and they work.