Tripp Lite - 2ft Computer Power Cord Cable 5-15P to C13 Heavy Duty 15A 14AWG 2'
Reviews coming soon
About this product
The 2ft Computer Power Cord Cable 5-15P to C13 Heavy Duty 15A 14AWG 2' is designed for high-power applications, featuring a 14 AWG wire gauge suitable for large servers, laser printers, and other network devices. Its 2-foot length provides flexibility in device placement while minimizing cable clutter. The cord is UL Listed and RoHS Compliant, ensuring safety and environmental responsibility.
Features
Heavy-Duty Construction
Features a 14 AWG wire gauge, suitable for high power connections, making it ideal for large server applications.
Flexible Length
2-foot (0.61-meter) length allows flexibility in placing devices while reducing cable clutter.
Universal Compatibility
Connects devices like computers, large servers, and laser printers to a PDU up to 2 feet away.
Safety and Compliance
UL Listed and RoHS Compliant, ensuring safety and environmental responsibility.
Specifications
- Cable Length2 feetConnector Type (End 1)NEMA 5-15PConnector Type (End 2)USB-C
Reviews
This product doesn't have any reviews yet.
Compare similar products

The 2ft Computer Power Cord Cable 5-15P to C13 Heavy Duty 15A 14AWG 2' is designed for high-power applications, featuring a 14 AWG wire gauge suitable for large servers, laser printers, and other network devices. Its 2-foot length provides flexibility in device placement while minimizing cable clutter. The cord is UL Listed and RoHS Compliant, ensuring safety and environmental responsibility.

Lost the original cord, or need a longer, shorter, or heavier one for your PC, monitor, or printer? This Cable Leader 14 AWG heavy-duty computer power cord is a 3-prong power cord with a standard NEMA 5-15P plug for any 120V wall outlet, power strip, or UPS and an IEC C13 connector for the C14 inlet on your device, rated 15A at 125V for up to 1875W, 50 percent more current than a typical 10A 18 AWG cord. Three 14 AWG copper conductors run inside a flexible SJT jacket rated to 105°C, and this UL Listed AC power cord has molded ends for strain relief. A universal power cord replacement for any device using an IEC C14 inlet, including desktop and gaming PC power supplies (PSU), monitors, laser and inkjet printers, projectors, scanners, servers, and network switches. Best for: replacing a lost or damaged PC power cord or monitor power cable, or reaching a far outlet with a long power cord. Not for: 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.

Need to power a UPS, rack PDU, or server with a C20 inlet from a standard wall outlet? This Cable Leader power cord pairs a NEMA 5-15P 3-prong grounded wall plug with an IEC 60320 C19 connector, delivering wall-outlet power directly to higher-power equipment without a PDU-to-device jumper. It is built from 14 AWG, 3-conductor copper wire with a flame-retardant VW-1 SJT jacket and fully molded ends, rated 15A at 125V for indoor use, and the cordset is UL Listed. The C19 connector fits the C20 inlets commonly found on rack PDUs, larger UPS units, servers, and core switches; it is larger than the common C13 and will not fit C14 inlets, and the 5-15P plug limits the cordset to 15A even though some C19 hardware exists in 20A versions. Best for: powering a C20-inlet UPS, PDU, or server from a standard North American wall outlet within 15A/125V. Not for: C13/C14 devices, 20A applications, 250V circuits, or outdoor use.

Power tool, shop vacuum, air compressor, or appliance cord cut, crushed, or worn through at the plug? This Cable Leader 3-prong power cord replacement pairs a molded NEMA 5-15P plug for standard 120V outlets with a pigtail open end: 2 in. of outer jacket removed and each conductor semi-stripped 1/2 in., with black (hot), white (neutral), and green (ground) leads ready for the device's terminal block. It is a UL Listed heavy duty power cord built from 14 AWG 3-conductor copper in a flexible SJT jacket, rated 15A at 125V (1875W), the full capacity of a standard 15A outlet. Compatible with any 120V device drawing 15A or less that takes a 3-wire grounded cord, including microwaves, shop vacuums, circular and miter saws, air compressors, pumps, and kitchen equipment. Best for: power cord repair on high-draw 120V gear, as a replacement power cord, 3-prong AC power cord, or appliance cord. Not for: window air conditioners (they need an LCDI plug), 240V dryers or ranges, 20A equipment, 2-wire devices, or in-wall wiring.















































