Tripp Lite - by Eaton Heavy-Duty PDU Power Cord Locking C13 to C14 - 15A 250V 14 AWG 6 ft. (1.83 m) - For Computer - Black

This power cord extension adds reach to a power cable you already own, or connects equipment straight to a rack outlet. The fully molded IEC 60320 C14 male plug mates with any C13 outlet on a PDU, UPS, surge protector, or the C13 end of an existing wall cord, while the C13 female end fits any device with a standard C14 power inlet - desktop computers, servers, network switches, monitors, printers and scanners. As an IEC C13 power cord built on heavy-duty 16 AWG three-conductor copper with a flexible SJT jacket rated to 105C (221F), this 3-prong extension power cord carries 13A at 250V, a full amp step above the 10A 18 AWG cords normally supplied in the box. Fully molded strain relief at both ends resists cracking where the cable meets the connector. UL Listed. Best for: extending a C14-inlet device to a PDU or UPS in a rack, data center or workstation, and replacing a lost or worn power cord extender. Not for: wall outlets - this cord has no NEMA plug; and not for C5, C15 or C19 inlets, or equipment drawing more than 13A.

Running a switch, server or multi-PSU chassis on the thin cord that came in the box? This IEC C13 to C14 heavy duty power cord carries 15A at 250V on 14 AWG three-conductor copper, two gauge steps above the 10A 18 AWG cordset most equipment ships with, so the cable is never the weak link in the rack. The C14 male end goes into any free C13 outlet on a PDU, UPS or rack strip and the C13 female end goes onto the equipment inlet, adding reach without touching the cord already run to the wall. A flexible SJT jacket rated to 105C and fully molded connectors resist cracking where the cable meets the plug. Compatible with any device using a standard IEC 60320 C14 power inlet and any C13 outlet on a PDU, UPS or surge protector; six jacket colors let you tag A-side and B-side feeds on sight. UL Listed, RoHS compliant. Best for: high-draw rack equipment and long runs where voltage drop matters. Not for: wall outlets, or C19/C20 and C5/C7 equipment.

This 2-meter charge cable is made with a woven design — with USB-C connectors on both ends — and is ideal for charging, syncing, and transferring data between USB-C devices. It supports charging of up to 240 watts and transfers data at USB 2 rates. Pair the USB-C Charge Cable with a compatible USB-C power adapter to conveniently charge your devices from a wall outlet and take advantage of fast-charging capabilities. USB-C power adapters sold separately.