Tripp Lite - USB C to USB-A Cable Right Angle 3.1 5 Gbps USB Type C M/F 6in

This RCA Subwoofer Cable is a male-to-male digital coaxial audio and composite video cord for equipment with RCA ports. Use it with subwoofers, receivers, HDTVs, Blu-ray and DVD players, media players, set-top boxes, amplifiers, audio processors, and home theater systems. The 75 Ohm RG-59/U coaxial design supports S/PDIF digital audio, composite video, and line-level RCA signals. Double shielding helps reduce EMI and RFI interference, while 24K gold-plated molded RCA connectors resist corrosion and support dependable signal transfer. A flexible PVC jacket and molded strain relief simplify routing around AV equipment. Technical Specifications:- Product Type: RCA digital coaxial audio/video cable- Connector A: RCA male- Connector B: RCA male- Connection Type: Male to male- Signal Support: S/PDIF, composite video and line-level RCA- Impedance: 75 Ohm- Cable Type: Low-loss RG-59/U coaxial- Center Conductor: 22AWG solid copper/CCS- Shielding: Double shielded- Connector Finish: 24K gold-plated- Construction: Molded connectors with PVC jacket- Warranty: Lifetime warranty Typical Applications: subwoofer-to-receiver connection, digital coaxial audio, composite video, HDTV, Blu-ray and DVD players, set-top boxes, media players, audio processors, amplifiers, and home theater systems. Note: This passive cable carries compatible RCA signals and does not convert digital or analog formats

Wiring a crowded patch panel or switch where every millimetre counts? This Cable Leader non-booted Cat 6 Ethernet patch cable, also sold as a Cat6 LAN cable, internet cable or RJ45 network cord, drops the bulky boot so plugs sit side by side in high-density ports and air moves freely through the rack. It uses four twisted pairs of 24 AWG bare copper in a 6.2 mm PVC jacket, tested to 550 MHz, well beyond the 250 MHz the Cat 6 standard asks for, with 50-micron gold-plated RJ45 contacts. Compatible with any RJ45 port on Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP gear. Carries high speed Gigabit Ethernet up to 100 m and fits any Cat 5e, Cat 6 or Cat 6a jack, Cat6 and Cat6a patch panels alike. Stocked in 6 inch to 100 ft lengths, including 3, 10, 25 and 50 ft, from short patch cables to long Ethernet cables between rooms. Best for: patch panels, network switches, server racks and structured cabling. Not for: cables unplugged often (no latch protection), plenum or riser runs, or outdoor use.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions®. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10.