VEVOR - 12V Linear Actuator, 7.87 Inch Ultra Heavy-Duty 2023lbs/9000N Linear Motion Actuator, IP65 Waterproof 0.2"/s - Black

Coated with 1000h-salt-fog-tested RustGuard, our screws resist rust and corrosion. The T25 star drive avoids slippage, while the self-tapping tip and coarse threads need no pre-drilling. The 350-piece pack handles deck, fence, table, chair, and bed frame with screw connectors for easy installation.

The Worx Nitro WX891L 20V PowerShare 25’ Cordless Drain Auger is easier to use for clearing tough clogs than a hand-operated plumbing snake and is much less expensive than calling a plumber each time you have a difficult drain to clear. Part of the Worx Nitro Series of battery-operated tools, outdoor power and lifestyle products, which are engineered to provide more power, greater performance, and better run times than other battery-powered tools on the market. The Nitro Drain Auger provides up to 560 RPM to break up the toughest stoppages, and the variable speed trigger gives the user control to find the best speed for the job at hand. (Different pipes, drains, and clog types require different speeds to clear effectively.) This drain auger was built to handle drains up to 2 in. wide and is perfect for toilets, bathtubs, sinks, downspouts and more. It’s easy to use. It weighs only 9.2 lbs., so almost anyone can operate it. The 25 ft. ¼ in.-diameter steel cable extends and retracts automatically, so you don’t need to feed it down the drain like you do with a plumbing snake. And this drain auger is cordless, so you eliminate the hassle or hazard of tripping over or getting snagged on a cord. Chemical cleaners can be dangerous and less effective, plumbing snakes require a lot of manual labor and can damage pipes, while the Nitro Drain Auger pays for itself after just one use compared to the rates that a plumber charges.

The Topcon LS-80X Laser Receiver Sensor Detector provides a longer range when using a red beam rotary laser. The unit can be adjusted for fine or coarse band, which helps improve the accuracy. It has an audible notice for height. The LS-80X has a rear-mounted speaker for a louder audible tone on noisy job sites. There are 11 different channels to display the data on the LCD display. With a rating of IP-66, the rubber-cased Topcon LS-80X Laser Receiver Sensor Detector is protected against dust, water and against dropping it. For more stability, it can also be mounted with a Holder 6 bracket. The Topcon LS-80X Laser Receiver Sensor Detector can run for up to 120 hours on two AA batteries. To save battery life, it will shut down after 30 minutes if it hasn't been used.