This 20V Axis Reciprocating/Jig Saw 2-in-1 gives you a whole lot of tool(s) for the money. There’s no need to buy a separate reciprocating saw and jigsaw when you have an Axis. Worx engineers figured out that those two saws actually employ a similar motion to get their different jobs done, and designed a way to put that functionality into one tool. So you get the raw power of a reciprocating saw (3000/min of no-load speed) to tear down structures, but then the head folds down into the base to give you more balance to make those intricate cutouts that only a jigsaw can perform. Plus, there’s no cord to get in your way, so you’re free to move. And at only 4.2 lbs, you can work long hours without getting hand and arm fatigue. The jigsaw is made to cut through wood (2” cutting capacity), PVC pipe (2”), and steel plate (5/32”). While the reciprocating saw also cuts wood and PVC pipe at 2”, but steel pipe at 2”, too. And they both have a 0.75” stroke length. With a built-in dust blower, you’ll always see the shapes you’re cutting in jigsaw mode. And the safety lock-off switch prevents accidental starting. Get an innovative 20V Axis Reciprocating/Jig Saw 2-in-1 from Worx and get more done, with less strain on both your hands and your wallet.

The ultra-portable and easy to handle Worx Nitro WX531L 20V Power Share WORXSAW 4.5 in. Cordless Compact Circular Saw with Brushless Motor might be small, but it’s more than powerful enough to get the job done. With 6900 RPM of no-load speed, it’s able to spin the blade as fast as cordless circular saws that are much larger. The 4.5 in. blade only has a 3/8 in. arbor. That’s half the size of a traditional circular saw’s blade, and it allows the motor to push the blade to higher speeds. And the user benefits from having all that power in an easy to grip and easy to transport form factor. In fact, this compact circular saw weighs less than 4 lbs., so it’s much easier to maneuver and make tricky cuts with than a full-size circ saw. Speaking of cuts, this 4.5 in. circular saw was made to cut 2x4s and plywood. With a max cutting depth of 1.5 in., it slices right through. And 0-46 degree bevel cuts are as easy as setting the bevel-adjustment lever. This cordless circular saw is driven by a high-efficiency brushless motor. It doles out more power but uses less battery while doing so, which means you get more runtime on just one charge. This 20V circular saw has a comfortable grip as well, so you can put in the hours and not feel it as much in your hands afterward. This Worx Nitro WX531L 20V Power Share WORXSAW 4.5 in. Cordless Compact Circular Saw with Brushless Motor is the more nimble version of the full-size cordless circular saw.

The Worx 20V 6-1/2” Circular Saw is the user-friendly circular saw. With enough power to tackle every common circ saw job (this is the same battery we use for our chainsaws and lawnmowers) and innovative functionality that produces better, straighter results. ExacTrack is the star of the show, which allows you to set up the saw right against your cutting board when you’re doing rip cuts. You don’t have to measure out where the cut is going to be, because you can see exactly what you’re cutting. That gives you greater accuracy, with fewer chances for mistakes. And at only 4.5 lbs., this saw is easier to control. Plus, there’s no cord to get tangled-up in. And you can always flip ExacTrack off and use this as a regular circular saw. There’s a switch in the back to toggle between modes. This saw comes with one 24T carbide-tipped wood cutting blade to get you started. The high-efficiency motor spins it at 3600 rpm. And the cutting depth is 2-5/32” @90° and 1-17/32” @45°. This saw does bevel cuts just fine, too, with a 0-50° capacity. The vacuum adapter lets you hook up your favorite shop vac so you can keep your project and workspace clean. And of course, we threw in a charger so you can keep your Power Share battery ready to go.