VEVOR - Pneumatic Crimping Tool Am-10, Air Powered Wire Terminal Crimping Machine Crimping Up To 16mm2, Pneumatic Crimper Plier - Orange

This 20V Axis Reciprocating/Jig Saw 2-in-1 gives you a whole lot of tool(s) for the money. There’s no need to buy a separate reciprocating saw and jigsaw when you have an Axis. Worx engineers figured out that those two saws actually employ a similar motion to get their different jobs done, and designed a way to put that functionality into one tool. So you get the raw power of a reciprocating saw (3000/min of no-load speed) to tear down structures, but then the head folds down into the base to give you more balance to make those intricate cutouts that only a jigsaw can perform. Plus, there’s no cord to get in your way, so you’re free to move. And at only 4.2 lbs, you can work long hours without getting hand and arm fatigue. The jigsaw is made to cut through wood (2” cutting capacity), PVC pipe (2”), and steel plate (5/32”). While the reciprocating saw also cuts wood and PVC pipe at 2”, but steel pipe at 2”, too. And they both have a 0.75” stroke length. With a built-in dust blower, you’ll always see the shapes you’re cutting in jigsaw mode. And the safety lock-off switch prevents accidental starting. Get an innovative 20V Axis Reciprocating/Jig Saw 2-in-1 from Worx and get more done, with less strain on both your hands and your wallet.

Escape the challenges of difficult nuts and bolts with the Worx Nitro 20V Brushless High Torque 1/2" Cordless Impact Wrench. With an outstanding 1400 ft/lbs of max breakaway torque, removing even the most stubborn nuts and bolts is a breeze. And with a 1000 ft/lbs max fastening torque you can secure fasteners with confidence. Equipped with an Intelligent Constant Torque System, this cordless impact wrench keeps torque level consistent, so you don't have to worry about losing torque when battery gets low. All that power is supported by the high-efficiency brushless motor that delivers 25% more power, a 50% longer runtime, and a 10X longer equipment life than standard brushed motors. The same Power Share battery that powers this impact wrench is conveniently compatible with 140+ power tools, landscaping equipment, and lifestyle products that are part of the Power Share platform from Worx. And if you've purchased the model with a Power Share PRO battery included, you'll enjoy 5.0Ah of battery power to increase runtime and get more done with less downtime. Built with a patented non-contact control switch, this durable impact wrench stands up to excess vibration and friction—unlike those with contact switches that wear down over time. Plus, the high-intensity impact transmission is specially craft to resist wear under tough conditions. 4 Mode Control allows you to easily switch between 3 Speeds + Auto Mode to get the best output for the job. Rely on Auto Mode to stop rotation immediately. In reverse, Auto Mode stops loosened bolts so they don't fall off and get lost. In forward rotation, Auto Mode prevents overtightening. Whether you're using the impact wrench for auto repairs or construction, you can rely on its competitively compact length of 8.3" to fit easily into tight spaces. Greater ease of use also comes from its built-in LED light that boosts visibility and the rubberized soft grip handle that enhances user comfort and control.

The 20V 2-in-1 Axis Reciprocating/Jig Saw from Worx saves you time, money, and its compact design saves you from the ache in your hands and arms that typically come with using saws like these. At only 4.2 lbs, this tool is easy to control, which is essential for the complicated designs you expect to cut with a jigsaw. And its vibration-absorbing soft grip handle cuts down on much of the unpleasant motion that’s inherent in using a reciprocating saw. It runs at 3000 rpms with a 0.75” stroke length, which is enough to cut 2” into wood and PVC pipe and go 5/32” into steel plate as a jigsaw, and as a reciprocating saw it’ll cut 2” into wood, PVC, and steel pipe. The LED headlamp illuminates dark work areas. And the off switch locks into place to guard against accidental starts. The tool-free blade change system is easy to use and accepts all common reciprocating saw and jigsaw blades that you’ll find at any local hardware store. Don’t buy separate jig and reciprocating saws when the Axis was built from the ground up to accomplish the tasks of both in less time and with less strain on the user. This Axis comes with a 20V 1.5 Ah battery and 0.4A charger, which you can use with any tool in the Worx Power Share family. You save money in the long run when you can share batteries between the cordless tools in your collection.