VEVOR - Rotary Welding Positioner, 441 lbs Load Capacity, -45° to 90° Tilt Angle Welding Positioner Turntable Table - Blue

Meet your new favorite workhorse, the Pegasus. This multi-function work table and sawhorse with quick clamps and holding pegs can support up to 300 lbs as a table, and up to 1,000 lbs as a sawhorse! The legs lock into place and are made of tough molded ABS with steel supports, and the non-slip feet stay in place on both grass and pavement. Yet the Pegasus itself is only 25 lbs, so you can fold it up and carry it anywhere, or keep it in the back of the truck. The integrated clamping system exerts up to 300 lbs of force to keep your project firmly in place, and has a max clamping width of 18 ¼”. And the clamp dog pegs allow you to secure round and oddly shaped materials. This table is 31” x 25” and is a standard 32” high, so it can be linked up with our other Worx tables, and other Pegasuses, to make a longer, fully-functional work table. (Link locks are included.) And the folding tray at the base is designed to hold tools, power strips, or anything you need on the job. The Pegasus is tough and solid enough to be a permanent work table or sawhorse but built to be portable, so you can take it from job to job, or from the basement to the garage without a problem. And it folds down to a depth of only 5”, so it’s easy to store when you’re not going to be using it for a while.

Durable but light, easy to transport, yet can support up to 1,000 lbs as a pair. These Worx Clamping Sawhorses with Bar Clamps, Built-in Shelf, and Cord Hooks can hold and clamp almost anything and go almost anywhere. They’re only 4 lbs a piece (that’s a far cry from old, heavy, wooden sawhorses) so you can run them up and down the stairs or toss them in the trunk. 27” x 5” x 32”, the same height as our other work tables, so you can use them all on the same project. And they fold up into just 2.5” deep, so they’ll store anywhere. The integrated clamps are like an extra set of hands and lockdown on the material with up to 300 lbs of force, and have a maximum clamping width of 18”. The clamps are detachable, so you can use them both horizontally and vertically or take them off to use on a different project entirely. There’s a shelf built-in to the base to set tools, accessories, or power strips, and cord hooks on the side let you manage your cables to keep you from tripping. Plus, a 2-inch wide indentation on the top is there to hold plywood, particleboard, and other sheet goods. These clamping sawhorses make great gifts for new homeowners or DIY enthusiasts because they’re ideal for woodworking. And the lightweight yet sturdy design makes them popular amongst people who just don’t like lugging heavy equipment around.

Everyone needs the support of a Sidekick. It can handle up to 300 lbs, so it holds its own as a worktable in the shop or on projects. Yet it folds together easy and only weighs 13 lbs so you can take it anywhere and use it for everything. It’s great for tailgating, outdoor parties, pretty much anywhere you need a portable table. It’s 36” x 13.5” x 6” when folded for transport and 24” x 24” in table mode. It’s a standard 32” high—that’s the same height as our other Worx support products, so you can link it to the Pegasus (2 Link Locks are included) or use it on projects with our Clamping Sawhorses to extend its usefulness. It features 4 Clamp Dogs, which keep materials in place. It’s marked with many common measuring guides. And there are handy accessory trays built right in. The steel metal legs are designed not to slip on hard surfaces or sink into soft ground. And when you’re ready to go, they quickly collapse, and the table folds right around them like a briefcase, so you can take it to the next job or event. And that portability also makes it easy to store. The Sidekick is a great portable table that you can take anywhere and use to support the load once you get there. Whether you’re a painter or party-planner, DIY-er or handyman, you can always use a Sidekick.