VEVOR - Table Saw with Stand, 10-inch 15-Amp, Max Rip 25-in, Speed to 5000RPM, 40T Blade, Compact Portable Jobsite Saw - Black;Orange;Silver

Engineered to be easy to use and to fit into any size workshop, the 20V 7-1/4” Sliding Miter Saw from Worx will have you making a wide variety of miter and bevel cuts in no time. The easy change blade system allows for fast but safe switch-outs between blades. The dust bag and dust extraction system significantly cuts down on the amount of dust you’ll have flying through your workshop and onto your worktable. And the 3600 rpm motor makes smooth, precise cuts. The molded grip on the cutting arm allows for even, comfortable pulls. And the precision-machined guide rails are easy to adjust and hold your lumber firmly in place. What sets this saw apart from other sliding miter saws is its portable table saw design with full-size capabilities. At only 21 lbs, it’s easy to set up and move to different parts of the workshop or even take with you to the job site, yet its sturdy aluminum base gives it the leverage you need for this kind of work. With a smaller arbor, the motor can spin the blade faster than it could a full-size blade, which puts less wear and tear on the tool. This makes it more efficient and will increase the life of this saw. And the smaller footprint means you can actually keep the saw out of the way when you’re not using it.

The 20V 2-in-1 Axis Reciprocating/Jig Saw from Worx saves you time, money, and its compact design saves you from the ache in your hands and arms that typically come with using saws like these. At only 4.2 lbs, this tool is easy to control, which is essential for the complicated designs you expect to cut with a jigsaw. And its vibration-absorbing soft grip handle cuts down on much of the unpleasant motion that’s inherent in using a reciprocating saw. It runs at 3000 rpms with a 0.75” stroke length, which is enough to cut 2” into wood and PVC pipe and go 5/32” into steel plate as a jigsaw, and as a reciprocating saw it’ll cut 2” into wood, PVC, and steel pipe. The LED headlamp illuminates dark work areas. And the off switch locks into place to guard against accidental starts. The tool-free blade change system is easy to use and accepts all common reciprocating saw and jigsaw blades that you’ll find at any local hardware store. Don’t buy separate jig and reciprocating saws when the Axis was built from the ground up to accomplish the tasks of both in less time and with less strain on the user. This Axis comes with a 20V 1.5 Ah battery and 0.4A charger, which you can use with any tool in the Worx Power Share family. You save money in the long run when you can share batteries between the cordless tools in your collection.

With all the twisting and turning you do with a jigsaw, cordless jigsaws eliminate a lot of hassle. You don't have to worry about doubling back on a cord or having the tool jerked away in the middle of a cut when the cord goes taut. The Worx NITRO WX542L 20-Volt Power Share Cordless Jigsaw isn't just about convenience, however. It also has plenty under the hood to get the job done. With a no-load speed of 3500 RPM, a variable speed trigger for precise control and a highly-efficient orbital function, you'll be slicing through wood, aluminum, PVC and more. (Just chose the right blade for the material. And this jigsaw comes with a wood blade already in the box to get you started.) The ergonomic barrel-grip makes this cordless jigsaw comfortable to use, even after long periods of use. The overall design actually forces the vibration into the blade and away from your hands, making it easier to be precise. The vacuum attachment makes clean up a breeze. The LED light keeps the cutline lit when you're working in poorly-lit conditions. The tool-free blade change system is convenient and simple to operate. And at only 5 lbs. with the battery installed, the Worx WX542L 20-Volt Cordless Jigsaw is perfect for 1-handed operation and is easier to maneuver and make intricate cuts with than heavier jigsaws.