This trim kit was purchased to replace previous GE trim kit. GE has redesigned the kit where it does not fit flush against the wall, thereby leaving an ugly open gap about an inch wide. Beware unless you want dust and debris trapped around the microwave!
Had to get a new microwave as the old one broke. Had to get s new trim kit to match the new microwave. There was nothing wrong with the old trim kit. Why can’t you make a trim kit to fit all microwaves that size instead of having to pay $200 for a new one?
Was not informed that the frame was not adjustable therefore I could not use in in the custom cabinet the microwave sits in. I did use the bottom to secure it into the cabinet but needed to create my own frame.
A:AnswerHello Chiquidu - We appreciate your interest in our fantastic microwaves. This trim kit is not compatible with model PEM31SF4SS. We recommend checking out the kit JX827SFSS to work with your model. Keep in touch! - JB
A:AnswerThese ONLY FIT the spcific models as stated by GE. It has to do with the swing pattern of the door and the exhaust circulation for the units. I would not try to improvise as the mountings are also specific.
A:AnswerHI LW - Microwave Trim Kits are not interchangeable. GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227SLSS is compatible with GE® Required 30" Built-In Trim Kit JX7230SLSS. We encourage you to view the Quick Specs document at the following link for cabinet cutout dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227SL_BL_R2_17.pdf (PEB7226SF/JX7230SF1SS: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240379_peb7226sf_c2.pdf). We certainly appreciate your loyalty! Sue
A:AnswerHi Roxy- The interior dimensions of the Trim Kit opening are approximately 24.13" W x 12.83" H. It extends approximately 1" from the cabinet when installed. We suggest to view the Installation Instructions at the following link for more details: https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40782.PDF - This Trim Kit is compatible with GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven
PEB7227DLBB: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227DL_R2_17.pdf - Keep in touch! SUE@GEA
A:AnswerHello and thank you for reaching out about our wide array of microwaves. We recommend reaching out to us with the model number of your current microwave so we can compare sizes with a new model. The cutout dimensions listed are much smaller than normally required for a built-in microwave. Hope to hear from you soon. Thanks! - JB
A:AnswerHello Mike D. Thank you for your interest. We are glad to assist. I'm finding that this model requires the same cutout dimensions as your existing unit, so this would make the best replacement: https://products.geappliances.com/appliance/gea-specs/PEB7227ANDD
Here are the compatible trim kits for the model listed above.
27" Trim Kit: https://www.geapplianceparts.com/store/parts/spec/JX7227SLSS
30" Trim Kit: https://www.geapplianceparts.com/store/parts/spec/JX7230SLSS
You can view the new model specifications here: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227ANDD_C2_18.pdf
I hope you find this information helpful! Olga
Thanks so much for your interest in a GE microwave! We're more than happy to help you find a replacement. We would recommend model PEB9159DJWW as it is the closest to fitting the cutout as your current model. You will need to use the required trim kits as they are not interchangeable. The trim kits are Optional 27" Built-In Kit JX9152DJWW,
Optional 30" Built-In Kit JX9153DJWW. Thanks for choosing GE! Mike@GE