Bowers & Wilkins - CT Series 12" Passive Subwoofer - Black
Bowers & Wilkins - CT Series 12" Passive Subwoofer - Black
Specifications
- RMS Power1000 wattsWoofer Size12 inches
- Key Specs
- RMS Power: 1000 watts (The maximum amount of continuous power the device is able to handle.)
- Woofer Size: 12 inches
- General
- Brand: Bowers & Wilkins
- Model Number: CTSW12 BLACK
- Product Name: CT Series 12" Passive Subwoofer
- Color: Black
- Audio
- Minimum Frequency Response: 24 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.14 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Enclosure Type: Sealed
- Enclosed: true
- Connectivity
- Network Connector(s): 1 x 3.5mm mono in
- Subwoofer Connection Type: RCA
- Dimensions
- Product Height: 18.3 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 15.6 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 10.2 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 55.1 pounds (The out of box weight of the item.)
- Material
- Woofer Composition: Paper/Aramid fiber
- Included
- Cable(s) Included: None
- Warranty
- Warranty - Parts: 2 years
- Warranty - Labor: 2 years
- Other
- UPC: 714346307234
The CTSW12 is a passive subwoofer featuring a paper drive unit. All CT SW subwoofers have a closed-box design that makes them easy to install in cabinetry. It might seem strange to many listeners that a material like paper could have much to do with a product as solid and powerful as a Custom Theater subwoofer. Nevertheless, paper plays a vital part in what they're hearing.
- 12" passive subwoofer: Delivers authoritative bass for high-impact home theater audio.
- 24-140Hz frequency response: Delivers booming lows for an immersive soundscape.
- 4 ohms nominal impedance: Provides efficient conduction of power.
- 12" passive subwoofer: Delivers authoritative bass for high-impact home theater audio.
- 24-140Hz frequency response: Delivers booming lows for an immersive soundscape.
- 4 ohms nominal impedance: Provides efficient conduction of power.
Whats Included
- B&W CT Series 12" Passive Subwoofer
- B&W CT Series 12" Passive Subwoofer
Q: Can the subwoofer be installed in a cabinet?
A: All CT SW subwoofers have a closed-box design that makes them easy to install in cabinetry.
Q: Does the subwoofer have a built-in amplifier?
A: The CT Series 12" Passive Subwoofer does not have a built-in amplifier.
Q: What is the frequency range of the subwoofer?
A: The frequency range of the subwoofer is 24 hertz to 0.14 kilohertz.
Q: What are the dimensions of the subwoofer?
A: The CT Series 12" Passive Subwoofer has a width of 15.6 inches, a depth of 10.2 inches, and a height of 18.3 inches.
Q: What type of connection does the subwoofer use?
A: The subwoofer uses an RCA connection type.
Q: I understand is special order how do I place my order?
A: Hello, you can reach out to your local Best Buy for information on how to order and install any of our Custom Install speakers.
Q: Hello How I can connect the subwoofer to a stereo amp Regards Thomas
A: You would use one channel of your stereo amplifier and attach the subwoofer like a standard speaker. Bass management would be necessary to integrate the subwoofer, and those controls could be found in a Surround Sound Receiver or Home Theater Processor.
Compare similar products
The CTSW12 is a passive subwoofer featuring a paper drive unit. All CT SW subwoofers have a closed-box design that makes them easy to install in cabinetry. It might seem strange to many listeners that a material like paper could have much to do with a product as solid and powerful as a Custom Theater subwoofer. Nevertheless, paper plays a vital part in what they're hearing.
The HS12T SUB includes a wide bandwidth Sonance Laminated Core Transformer with an adjustable tap, making it flexible and powerful for any outdoor landscape application.
The Classic 99 is the larger version of our Classic 98 and is designed for those that yearn for the vintage REL sound and styling. With the gorgeous walnut veneer exterieor, and the downward firing paper cone, this beautiful addition to the REL lineup will fit in perfectly with a mid-century modern home, or for those that are looking for a subwoofer that looks like no other.
The Classic 98 is designed for those that yearn for the vintage REL sound and styling. With the gorgeous walnut veneer exterior, and the downward firing paper cone, this beautiful addition to the REL lineup will fit in perfectly with a mid-century modern home, or for those that are looking for a subwoofer that looks like no other.
Specs
Reviews
This product doesn't have any reviews yet.