Micromega - MyAmp 60W 2-Ch. Power Amplifier - White
Specifications
- Continuous Watts x Channel @ Ohms60W x 2Number of Channels2Number of Audio Zones1Preamp OutputsNo
- Key Specs
- Continuous Watts x Channel @ Ohms: 60W x 2
- Number of Channels: 2 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Number of Audio Zones: 1 (Audio zones, typically designated by rooms in a home, are areas in which all speakers are dependent on the same sound source. Whether a zone encompasses one or multiple rooms, the receiver or preamp/processor is used to control all aspects of its audio and is able to select which zones receive sound.)
- Preamp Outputs: false
- General
- Brand: Micromega
- Model Number: MICROMEGA MYAMP - WH
- Product Name: MyAmp 60W 2-Ch. Power Amplifier
- Color: White
- Audio
- Continuous Watts x Channel @ Ohms: 60W x 2
- Maximum Watts x Channel @ Ohms: 260W x 2 @ 4 ohms (This is the maximum load the speaker, subwoofer or amp can drive.)
- Total Power Handling: 60 watts (How much amplifier (amplified) power (wattage) that can be handled before damaging the product.)
- Number of Channels: 2 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Number of Audio Zones: 1 (Audio zones, typically designated by rooms in a home, are areas in which all speakers are dependent on the same sound source. Whether a zone encompasses one or multiple rooms, the receiver or preamp/processor is used to control all aspects of its audio and is able to select which zones receive sound.)
- Minimum Frequency Response: 10 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Total Harmonic Distortion: 0.01 percent (Measurement of the harmonic sound distortion. The lower the percentage, the cleaner the sound.)
- Maximum Frequency Response: 50 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Amplifier Class: AB (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Amplifier Type: Power amplifiers
- Signal-to-Noise Ratio (SNR): 100 decibels (The ratio of the desired signal's strength to the level of background noise. A ratio higher than 1:1, which equates to greater than 0 decibels, indicates more signal than noise.)
- Bass Boost: Fixed (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- Inputs
- Speaker-Level Inputs: false (Also referred to as high-level inputs. Enables the amplifier to receive a sound signal from another device that does not have RCA, or low-level, inputs.)
- Line-Level Inputs: true (Also referred to as low-level inputs. Enables the amplifier to receive a sound signal from another device via RCA cables.)
- Outputs
- Preamp Outputs: false
- Features
- Fan Cooled: true
- Bridgeable: false (Bridging an amplifier increases the power it supplies to the speaker(s).)
- Dimensions
- Product Height: 3 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 5.5 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 5.54 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 2.2 pounds (The out of box weight of the item.)
- Other
- UPC: 3760186790702
Enjoy quality sound with this Micromega MyAmp 60W 2-channel amplifier, which features a Class AB power amplification section for robust audio. The nonconductive, low-resonance ABS casing helps limit vibration and offers accurate sound reproduction.
- 60W total power: Along with a Class AB power amplification section delivers robust sonic performance.
- FET buffered relays: Supports input switching with minimal interference from connected sources.
- Nonconductive, low-resonance ABS casing: Delivers high-fidelity audio, minimizes vibration and provides isolation from electrical components.
- USB port: Enables you to stream native files with up to 24-bit/96kHz resolution from connected USB devices.
- Bluetooth aptX technology: Allows simple wireless connection to compatible devices.
Whats Included
- AC power cable
- MyAmp 60W 2-Ch. Power Amplifier
Q: What is the signal-to-noise ratio of the amplifier?
A: The Signal-to-Noise Ratio (SNR) is 100 decibels.
Q: What is the power output per channel of the amplifier?
A: The Micromega MyAmp can provide 60 watts per channel.
Q: Is the amplifier fan-cooled?
A: This amplifier is fan-cooled.
Q: What is the frequency response range of the amplifier?
A: The frequency response range is 10 hertz to 50 kilohertz.
Compare similar products
Enjoy quality sound with this Micromega MyAmp 60W 2-channel amplifier, which features a Class AB power amplification section for robust audio. The nonconductive, low-resonance ABS casing helps limit vibration and offers accurate sound reproduction.
The RB-1552MKII is a close sibling to the RB-1582MKII, sharing the same platform and delivering a robust 2 x 130 Watts power output. Experience exceptional performance with this formidable stereo amplifier.
Meet the RB-1582MKII, a compelling stereo amplifier that delivers a powerful 2 x 200 Watts per channel while harnessing Rotel's Balanced Design Concept for superior performance. Get ready to experience audio like never before.
The AMP 20 is a remarkably powerful 12-channel amplifier. Pair with AV 20 and any of our CINEMA Series products for an elite, reference-level home theater system. AMP 20 is rated at 200 watts per channel into 8 ohms and 400 watts per channel into 4 ohms. AMP 20 is built on Marantz exclusive HDAM and redesigned Class D amplification.
| Pros for Micromega - MyAmp 60W 2-Ch. Power Amplifier - White | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Sound Quality | There were no pros for this product— |
Specs
Reviews
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
- Rated 5 out of 5 stars
excellent amp for it's size!
i use this integrated amp on my desktop which replaces my audioengine's. i did have a pair of kef x300a for a lil' while but i had to return them due to their occasional delay when starting/stopping the music and a very long delay when turning on the speakers. i'm using this with a pair of focal dome and a tiny velodyne microvee sub, everything sounds amazing when the music plays.
seff19 Posted