Questions & Answers

Q: QuestionDoes this adapter support quality of service traffic prioritization?

• A:Answer Yes, this adapter supports quality of service traffic prioritization.

Q: QuestionWhat kind of security features does this adapter have?

• A:Answer This adapter has AiProtection Pro network security and Instant Guard.

Q: QuestionIs this adapter energy star certified?

• A:Answer No, this adapter is not energy star certified.

Q: QuestionWhat is the maximum data transfer rate for this adapter?

• A:Answer The maximum data transfer rate is 2500 megabits per second.

Q: QuestionHow many LAN ports does this adapter have?

• A:Answer This adapter has one LAN port.

Q: QuestionDoes this adapter have parental controls?

• A:Answer Yes, this adapter has parental controls.

Q: Questiontrying to swap an actiontec ecb6250 with this. actiontec works, this doesnt. same cables in and out. i have 4 other actiontecs working in the house.

Asked 3 months ago by asdf.

• A:Answer I imagine you might have protocol problems between the 2 manufactures

  Answered 2 months ago by MjmmaVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan unit work without WiFi? Use only with coax.

Asked 3 months ago by Bullyball.

• A:Answer Yes the mimic lan cables.

  Answered 2 months ago by MjmmaVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is tge Max distance the coaxial cable can be?

Asked 3 months ago by Distance.

Q: QuestionIs the ethernet port 2.5gb?

Asked 4 months ago by SteveP.

• A:Answer Yes

  Answered 2 months ago by MjmmaVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHow long is the ethernet and coaxial cable that comes with this?

Asked 4 months ago by Haron.

• A:Answer they are both about a foot and a half. I used some 25FT Cat6e cables on the modem to the router and back again with no degradation in speed.

  Answered 2 months ago by MjmmaVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDo you just use one or do you need one by modem and one in other room?

Asked 4 months ago by Grmrsan.

• A:Answer Need at least 2

  Answered 2 months ago by MjmmaVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionplease confirm that these can handle full 2.5gb throughput

Asked 6 months ago by Itguy.

• A:Answer Yes, the ASUS MA-25 MoCA Adapter supports full 2.5 Gbps throughput. It uses the MoCA 2.5 standard to deliver high-speed, low-latency Ethernet over coaxial cable, making it suitable for demanding network applications.

  Answered 6 months ago by ASUS Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI can’t get the internet to work. It shows connection but no internet going thru.

Asked 6 months ago by Alex.

• A:Answer The one connected to the modem goes in the WAN port then out on a lan port to the router. On the 2nd or third unit the go in a Wan port from the 2.5 on the MA-2.5

  Answered 2 months ago by MjmmaVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDoes this adapter work with onboard moca on some routers/gateways, like Xfinity's XB8 that can output its own moca signal? Or do I need to buy 2 of these to install one at the router/gateway end? Many do work with onboard but I am unsure for Asus'.

Asked 7 months ago by Lego.

• A:Answer Yes, this MA-25 adapter can work with a router or gateway, like Xfinity's XB8, that has built-in MoCA signal on the coax cable. You only need one MA-25 adapter at the location you want to add an Ethernet connection, while the router's built-in MoCA handles the other end.

  Answered 6 months ago by ASUS Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question