“Trying to program this, is a nightmare. Instructions are ridiculous. Can someone tell me, step by step please. Ive tried 6 different ways.. I will be returning this if I can’t program it.”
Answer This Question
1-5 of 5 Answers
Hey CeeCee, it just takes practice. First things first, make sure your clock is set to your correct time. You can set the clock by pressing PROG until "clock" is displayed on the screen, press the HOUR and MIN buttons to achieve the right time (be careful to make sure you AM/PM is right!) Once your clock is set, press PROG until you get the word "timer" on the screen, in this window you adjust the HOUR and MIN buttons again, but this time you are setting the time you want the coffee pot to turn on and begin brewing -- again, make sure your AM/PM is what you want. Once finished, you can press the PROG button again until the words disappear, or you can wait and the screen will return to the current time (this is true of all PROG windows, if you take too long, it may go back to the main clock screen and you have to press PROG to get back where you were). Once your timer is set, make sure your machine is loaded with grounds and water, then press on/off twice. The first press turns on the machine as if you want to brew that moment (indicated by the red light under ON turning on), pressing ON/OFF again will activate AUTO, which is accompanied by a green light. Once your AUTO is on, you're pot will turn on at the time you indicated and you'll have coffee! Practice these steps a few times and you'll be a pro.
Sorry, there was a problem. Please try again later.Unplug the coffee maker. Wait a few seconds. Plug it back in and the clock display will be blinking. Push the hour button then the minute button to the correct time. You’re done.
Sorry, there was a problem. Please try again later.I definitely here you, same issues for me.
Sorry, there was a problem. Please try again later.It will not get any easier. Return it while you can. Designed by morons?
Sorry, there was a problem. Please try again later.Hello, thanks for reaching out. AUTOMATIC START FUNCTION To set the automatic start function, follow steps 1 to 5 of the previous page, and then continue with the steps noted below: 1. Press the ON/OFF button twice; the AUTO indicator will be illuminated GREEN. 2. Press PROG button; the LCD will display CLOCK. Set the current time by pressing the HOUR and MIN buttons. NOTE: The time cycle is 24 hours; “AM” and “PM” will switch once every 12 hours. 3. Press PROG button again, the LCD will display TIMER, then set the automatic start time by pressing the HOUR and MIN buttons. 4. Once the current time reaches the set time for the auto brew, the ON indicator will illuminate red and the unit will start the brewing cycle. After brewing, keep the carafe on warming plate. NOTE: If the coffee maker is left unattended for two hours after brewing, it will shut off automatically. Hope this helps. Have a nice day. The BELLA Team.
Sorry, there was a problem. Please try again later.
