How do you clean it? null

I place a plastic bag in the catcher, which saves a lot of cleaning time . I use a brush to clean the metal basket and it work well.

Take it apart and wash with dish soap. Use a brush, (like a toothbrus) to clean the part with the blade.

Pulling the blades along with the plastic below.

Hello, thanks for reaching out. CArE & CLEANINg INSTruCTIONS 1. Unplug from outlet. Please follow the procedures outlined in the Disassembly Instructions to remove parts before cleaning. 2. Clean unit and parts after each use. 3. Do not immerse the motor base in water or spray it with water. Clean only by wiping with a damp sponge, cloth, or paper towel. Use any liquid dishwashing detergent but do not use products containing ammonia or scouring powders. These products will dull, scratch or mar the surface. 4. If any juice has spilled under the Juice Extractor, clean legs and area with a lightly soaped sponge, then dry. Use a damp toothbrush or cloth to clean juice from inside the motor hub on top of the motor base. 5. All parts (except the motor base) are washable in warm, soapy water or in the dishwasher. 6. When cleaning the blade basket, make sure the tiny holes in the basket are not clogged. This can be accomplished by holding the blade basket under running water faucet. Rub a plastic scrub pad in a circular motion to clean the basket holes from both inside and outside of the blade basket. CAUTION: Use care when handling the blade basket. Hold the basket’s rim only. DO NOT TOUCH the cutter blades on the bottom of the basket. The cutter blades are very sharp! NOTE: If necessary, allow the blade basket to soak in hot water with 10% lemon juice added. 7. The Juice Extractor clear cover, juice bowl, blade basket, pulp basket, juice pitcher and juice pitcher lid may be washed in the top rack of a dishwasher. However, washing with warm (not hot) tap water on a daily basis should be sufficient. 8. Due to the powerful staining properties of the carotenoids that are found in many vegetables, especially carrots, we suggest soaking stained parts overnight in any of these 4 cleaning solutions: • Biodegradable soap in enough warm water to cover Juice Extractor parts • 1 part warm water to 1 part cider vinegar • 1/2 small box baking soda in enough warm water to cover parts. • Warm water with 10% lemon juice solution. CAUTION: Never use ammonia or abrasives. • Lightly clean with a sponge or kitchen rag and liquid detergent after soaking. WARNING: NEVER SUBMERGE THE MOTOR BASE IN WATER OR OTHER LIQUID! Hope this helps. Have a nice day. The BELLA Team.

Everything else should be easy to rinse off but the middle silver part that shreds the veggies and fruits make sure to scrubs the outside first and then the inside so everything comes off, and then after the silver part is completely washed off of food waste let it sit in warm water. And let’s the parts that you broke down air dry.

“How do you clean it?”

Asked by Lido 5 years ago

Answer This Question

See all questions & answers

Bella - High Power Juice Extractor - Black-Front_Standard

1-5 of 5 Answers

I place a plastic bag in the catcher, which saves a lot of cleaning time . I use a brush to clean the metal basket and it work well.
Answered by Allis 5 years ago
Sorry, there was a problem. Please try again later.
Take it apart and wash with dish soap. Use a brush, (like a toothbrus) to clean the part with the blade.
Answered by blueeyedgal 5 years ago
Sorry, there was a problem. Please try again later.
Pulling the blades along with the plastic below.
Answered by 101Fenix 5 years ago
Sorry, there was a problem. Please try again later.
Hello, thanks for reaching out. CArE & CLEANINg INSTruCTIONS 1. Unplug from outlet. Please follow the procedures outlined in the Disassembly Instructions to remove parts before cleaning. 2. Clean unit and parts after each use. 3. Do not immerse the motor base in water or spray it with water. Clean only by wiping with a damp sponge, cloth, or paper towel. Use any liquid dishwashing detergent but do not use products containing ammonia or scouring powders. These products will dull, scratch or mar the surface. 4. If any juice has spilled under the Juice Extractor, clean legs and area with a lightly soaped sponge, then dry. Use a damp toothbrush or cloth to clean juice from inside the motor hub on top of the motor base. 5. All parts (except the motor base) are washable in warm, soapy water or in the dishwasher. 6. When cleaning the blade basket, make sure the tiny holes in the basket are not clogged. This can be accomplished by holding the blade basket under running water faucet. Rub a plastic scrub pad in a circular motion to clean the basket holes from both inside and outside of the blade basket. CAUTION: Use care when handling the blade basket. Hold the basket’s rim only. DO NOT TOUCH the cutter blades on the bottom of the basket. The cutter blades are very sharp! NOTE: If necessary, allow the blade basket to soak in hot water with 10% lemon juice added. 7. The Juice Extractor clear cover, juice bowl, blade basket, pulp basket, juice pitcher and juice pitcher lid may be washed in the top rack of a dishwasher. However, washing with warm (not hot) tap water on a daily basis should be sufficient. 8. Due to the powerful staining properties of the carotenoids that are found in many vegetables, especially carrots, we suggest soaking stained parts overnight in any of these 4 cleaning solutions: • Biodegradable soap in enough warm water to cover Juice Extractor parts • 1 part warm water to 1 part cider vinegar • 1/2 small box baking soda in enough warm water to cover parts. • Warm water with 10% lemon juice solution. CAUTION: Never use ammonia or abrasives. • Lightly clean with a sponge or kitchen rag and liquid detergent after soaking. WARNING: NEVER SUBMERGE THE MOTOR BASE IN WATER OR OTHER LIQUID! Hope this helps. Have a nice day. The BELLA Team.
Answered by Bella Customer Service 5 years ago
Sorry, there was a problem. Please try again later.
Everything else should be easy to rinse off but the middle silver part that shreds the veggies and fruits make sure to scrubs the outside first and then the inside so everything comes off, and then after the silver part is completely washed off of food waste let it sit in warm water. And let’s the parts that you broke down air dry.
Answered by AdrR1116 5 years ago
Sorry, there was a problem. Please try again later.