1-4 of 4 Answers
Hi there, thank you for your question. The overall appliance dimensions are h-36 1/2" x w-31 1/2'' x d-28 1/2". The cutout dimension for this product is 30”wide. For more detailed specifications and installation manual visit http://www.bosch-home.com/us/.
Sorry, there was a problem. Please try again later.From the spec sheet it states required cutout size is 30"W and the stove is overall 29 3/16" W so it would seem that is the stove exterior sides with an overlap at the top that Overlaps and slides onto the countertop. I would suggest downloading their spec sheet for the model you are looking at. Good luck with your purchase and install !
Sorry, there was a problem. Please try again later.The dimensions are found in the 'Specifications' page. Just scroll down from the product description. For the 800 series, slide in range, you are given 'Cut-out' and' Dimension'. Cut out is the minimum clearance needed to fit the range - 25.25 inches deep; 35.5 inches height; 30 inches wide. Two things to pay attention to: 1) the stove has an overhanging lip on it on both sides extending about an inch. These will extend over the edge of your countertop, making a nice seamless seal, however, if the weight of the stove in solely or mostly supported by the countertop itself (and not by the front legs of the stove), the downward weight may cause top-drawers near the stove to stick when opening and closing. 2) If you are buying a gas range, be aware of where your gas line comes out of the floor or wall. The unit is designed to sit flush against the back wall. On mine, the gas pipe was too far out from the wall to allow this. I had to settle for about an inch and a half of space between the wall and the stove. Measure the distance of the gas pipe from the wall then go and actually measure the back of a demo range at your local store. There is an indention in the back of the range for this purpose, but I advise confirming the measurements yourself before having it delivered.
Sorry, there was a problem. Please try again later.Consult installation manual on line. Dimensions are accurate for a slide in. Sorry, don't have precise measurements.
Sorry, there was a problem. Please try again later.
